The Armour Archive

Spence

Still for sale TFS Smithy Special 400 lb anvil 1,500.00-------> I paid well over $2400 for this anvil and it is is pristine condition. 2 inch x 24 inch wide Kaowool I believe it is RT #6. 25 foot roll 100.00 9 piece gauntlet tool set_____________ $200.00 Metacarpal stake___________________$60.00 Pyr...

Spence

It is 2 inch x 24 inch wide Kaowool I believe it is RT #6.

I will look at it tonight when I get home but I know it is a full roll, I think it is about 12 1/2 feet of it.

Thanks

Spence

Update----- Still for sale TFS Smithy Special 400 lb anvil 1,750.00 9 piece gauntlet tool set_____________ $200.00 Metacarpal stake___________________$60.00 Pyramid stake male_________________$50.00 Blacksmiths 3 ft leg vise $60 full roll of refractory wool to make a forge with. $100 for the whole r...

Spence

Update----- Still for sale TFS Smithy Special 400 lb anvil 1,750.00 New tool holder for the gaunt tool kit.___$80.00 9 piece gauntlet tool set_____________ $200.00 Metacarpal stake___________________$60.00 Pyramid stake male_________________$50.00 Pyramid stake female________________$60.00 Blacksmit...

Spence

Starter kit with Hal's bonus Y-Stake tool ------Sold

hammers & leg vice---Sold pending payment

Beverly B3 shear and stand ---Sold

Thanks

Spence

Starter kit with Hal's bonus Y-Stake tool ------Sold

hammers & leg vice---Sold pending payment

Beverly B3 shear and stand ---Sold pending payment

Thanks

Spence

Halberds starter kit is available as I have not gotten any PM from Gryffinclaw

Thanks

Spence

Don't have a pic of the leg vise till I get home tonight but will post it.

Here are the Hammers and the Anvil for now.

Spence

I am not going to be but I work in Atlanta so I can meet if you would like if you are in the area.

Thanks

Spence

Hey folks I am moving in a few months and where I will be living is not blacksmith shop friendly. Most of my tools where bought and never used because I was in the middle of setting up the shop when I found out the bad news. TFS Smithy Special 400 lb anvil 1,750.00-------> this price is for the 300 ...

Spence

Geese so sorry yes it has been sold.

Thanks

Spence

Spence

Spence

bump.... still for sale

Spence

Pennsic just around the corner thought I would bump this and sell it for $400 plus shipping. This is a nice suit don't miss out.

$400 plus shipping. I take paypal and will ship it out any rate you like as long as the payment for shipping that rate is paid with insurance.

Thanks

Spence

Update knocked off 50 bucks. Not going any lower on this item, if not sold by the 15th it will become a den decoration.

Medieval Lamellar Stainless Steel Armor Body Suit $450 plus shipping.

Spence

bump still for sale.

Thanks

Spence

Still for sale is the Medieval Lamellar Stainless Steel Armor Body Suit $500 plus shipping.

Spence

UPDATE: extra 350 stainless scales, black lacing (106 yards) for $125 are sold.

Still for sale is the Medieval Lamellar Stainless Steel Armor Body Suit $500 plus shipping.

Spence

bump.. Still for sale.

Thanks

Spence

UPDATE: extra 350 stainless scales, black lacing (106 yards) for $125

Buyer has not responded and has been online since. Assuming a scammer so it is available for sale unless buyer responds.

Spence

UPDATE: extra 350 stainless scales, black lacing (106 yards) for $125 is sold pending payment.

Still for sale is the Medieval Lamellar Stainless Steel Armor Body Suit $500 plus shipping.

Thanks

Spence

The scales and lace would be $125 plus shipping. They fit in a large flat rate box so that's like 15 bucks or so.

Thanks

Spence

bump... $500 plus shipping if you just want the armor and not the extra scales.

Spence

It is the Medieval Lamellar Stainless Steel Armor Body Suit. http://armstreet.com/store/armor/medieval-lamellar-stainless-steel-armor-body-suit One difference is the straps. The straps on mine are riveted to one of the scales and are thicker and black leather. Other than that it is the same suit. Th...

Spence

Stainless steel lamellar armor made by the very talented armorers at Armstreet. m New, has been used as display armor at Pennsic. I have had this armor sitting in my closet and never used due to a back injury I cannot fight anymore so never even got a chance to wear it. Size: chest 47-55'' (XL-XXL) ...

Spence

Too bad you don't need gray squirrels. I can sit back with some beers and my Benjamin in my back porch and pick off a 100 of them and not even make a dent in the population of my woods. They are destructive little bastards, cute but they tear the hell out of everything.

Spence

Could make a light weight leather vambrace to go under it or perhaps even a vambrace made in the fashion of a linen padded jack/arming coat sleeve. To get an idea, look at a gambeson/padded jack/arming coat and just use the sleeve pattern cut to the length a few inches from the elbow. Would most lik...

Spence

Looks well made, pretty clean. The cheaper stuff I would image has some flaws you wouldn't see until after you get it. I don't sell the stuff because the amount of time put into it vs. what average people would be willing to pay is just not a well balance. Time period and region makes a very wide di...

Spence

Yeah appears to be like I said "More than one way to skin a cat" The weave method incorporated in your example would be allot easier to build than one I have made. Also the one I have made with the example I have shown is tailored for the wearer, whereas yours would be more one size fits m...

Spence

Looks like the rings are not running in the proper direction on the sleeves. I was taught that the links on the sleeve run in this manner opposed to the direction running on the chest. Of course there is always many different ways to skin a cat but the arm links are wide open which diminishes the pr...

Spence

You say willing to bet, I wouldn't bet someones life on something like this. I am extremely allergic to walnut oils, I cannot work with walnut woods either. It not being likely that most people would not have a problem? Sure since we are dealing with statistics here the chance is less likely or not ...

Spence

I would refrain from using any type of tree nut or peanut oil to blacken anything that you intend to sell. You may end up killing your buyer.

Spence

I would want to remain anonymous with such an item. Think about it real hard there.

Spence

If this helps I measured the outer diameter and inner diameter as well as length and I matched it up with this stock you can get here for pretty cheap. You may have to ream the inner diameter where the shaft meets the base but this would make a good handle. Mind you I have a B3 but just take measure...

Re: Update Moving and cannot have a shop anymore.

Re: Update Moving and cannot have a shop anymore.

Re: Update Moving and cannot have a shop anymore.

Re: Update Moving and cannot have a shop anymore.

Re: Moving and cannot have a shop anymore.

Re: Moving and cannot have a shop anymore.

Re: Moving and cannot have a shop anymore.

Re: Moving and cannot have a shop anymore.

Re: Moving and cannot have a shop anymore.

Update Moving and cannot have a shop anymore.

Re: WTS Stainless steel lamellar armor. Bought from Armstree

Re: WTS Stainless steel lamellar armor. Bought from Armstree

Re: WTS Stainless steel lamellar armor. Bought from Armstree

Re: WTS Stainless steel lamellar armor. Bought from Armstree

Re: WTS Stainless steel lamellar armor. Bought from Armstree

Re: WTS Stainless steel lamellar armor. Bought from Armstree

Re: WTS Stainless steel lamellar armor. Bought from Armstree

Re: WTS Stainless steel lamellar armor. Bought from Armstree

Re: WTS Stainless steel lamellar armor. Bought from Armstree

Re: WTS Stainless steel lamellar armor. Bought from Armstree

Re: WTS Stainless steel lamellar armor. Bought from Armstree

Re: WTS Stainless steel lamellar armor. Bought from Armstree

Re: WTS Stainless steel lamellar armor. Bought from Armstree

Re: WTS Stainless steel lamellar armor. Bought from Armstree

Re: WTS Stainless steel lamellar armor. Bought from Armstree

WTS Stainless steel lamellar armor. Bought from Armstreet