The Armour Archive

AKAWilliamUlfer

Are the legs still for sale? I PM'ed you.

AKAWilliamUlfer

Looks like it might have be a set of Stone Keep legs possibly.

AKAWilliamUlfer

Those were mine a long time ago. The shoulder cops are from Rough from the hammer and I just finished them out. The knees are for big boys. A really nice set, I hated to get rid of them. All stainless that will polish up nicely.

AKAWilliamUlfer

set is sold, sorry.

AKAWilliamUlfer

Sorry you are right, it is HDPE. It works like kydex though. I worked on one of the legs to set it straight.

AKAWilliamUlfer

I would be up for it, but you know the shipping would be crazy. A set of gauntlets in a flat rate international box was over $66.00 to ship. Send me you address and I'll pack it up and see what it will cost.

AKAWilliamUlfer

It will fit a medium to medium large person. My son is 5'7' and a 170 ibs amd it fits him fine with room to spare.

AKAWilliamUlfer

http://www.ebay.com/itm/321882762469?ss ... 1555.l2649

AKAWilliamUlfer

http://www.ebay.com/itm/321879486070?ss ... 1555.l2649

AKAWilliamUlfer

http://www.ebay.com/itm/321879483891?ss ... 1555.l2649

AKAWilliamUlfer

http://www.ebay.com/itm/321879487717?ss ... 1555.l2649

AKAWilliamUlfer

I hope everything goes well for you. Yes, modern medicine is great. It gave my mom an extra year of good life after her heart attack and lung cancer. Good luck. I'll be ordering from you in a little while.

AKAWilliamUlfer

finally got the legs I have been wanting. Can wait to get them on. Whoop Whoop.

AKAWilliamUlfer

When will the auction end? $90.00 from the man in the second row.

AKAWilliamUlfer

I didn't think in that direction, good thinking Losthelm. You could ask you preacher/priest if you have one, they may need something re-done and you could possibly get in on it.

AKAWilliamUlfer

Cyanide is very dangerous and very controlled . I have worked around it, and it is a pain in the butt. Have you contacted a jeweler around you? You could also look up electro platers on line and ship it, a cup should not be a problem. Silvers not to bad in price yet and the amount you would need is ...

AKAWilliamUlfer

What would the shipping on the spun top be to 32303. Dibs on the spun top.

AKAWilliamUlfer

I like WD40 for basic cleaning. If the helm will be put up somewhere in a bag or a stand I would recommend CLP or Breakfree. It is a gun cleaning agent that will leave a layer of teflon when it "dries". Ican be had at any Wal-Mart.

AKAWilliamUlfer

Weel, If your lucky you can find a beverly B1 on ebay for cheap. After using a friends HF knock off cutting T3 Aluminum, I was able to steal one (B1) off ebay for $125. No chips or cracks. Just needed a little TLC.

AKAWilliamUlfer

We love all your tools Halberds. I certainly do, or else I wouldn't keep buying them. LOL The new tool design looks very interesting. I love the large pipe for curves. For all my trash talk I need to "mount" my stake holder to a solid stump and "pound" away on it. LOL

AKAWilliamUlfer

I hate to bring this name up, but Ashcroft Baker had a removable bar grill design like Sean is talking about. Sorta like a flattened "C" welded to the top of the grill with a heavy (10 gauge) hook riveted to the helm. Seems to work OK. I did like the fact that Ashcroft put the same flatteded "C" on ...

AKAWilliamUlfer

I guess I hadn't seen the multi tool in profile before. When I saw it in profile I about lost my drink, somethings are left unseen. Where's my mind bleach? LOL As one that has more than a few of halberds tools, I don't know about this one. I would feel dirty having it in my shop, or is it jealousy. ...

AKAWilliamUlfer

I used Double layer sail cloth with leather washers under the rivets to keep them from cutting into the fabric. The upside to the sail cloth is it comes in a variety of colors and is pretty much water proof and durable. Down side is that it doesn't breath, but neither does leather. I still have my f...

AKAWilliamUlfer

I bought arms and legs from Frank five years ago and they are still going strong. Last year I bought the three buckle boots with lugged soles for fighting, they are the bomb. Frank is a great guy and merchant. Buy Buy Buy from him.

AKAWilliamUlfer

I have a set of double layer gauntlets. They are monsters, I'll be getting the bazubands soon too.

AKAWilliamUlfer

Though I will point out that the ones from Irontreeworks are completely hand forged, with twists and formed loops. I have one and they are truly nice. I'm sure yours are functional, but they are simple to make.

AKAWilliamUlfer

Just found this on Ebay. This is not mine but is a good buy.
http://www.ebay.com/itm/251502776020?ss ... 1423.l2649

AKAWilliamUlfer

Oh, Oh, I know. Tie rack!!!! Or some kind or road warrior axe.

AKAWilliamUlfer

Nice helm Dan!!! I think I'll use that type of chinstrap in my sons "Carlos" crusader helm.

AKAWilliamUlfer

I have a bunch of T-6 aluminum ones from Talbot.

AKAWilliamUlfer

I have alot of his tools too. I have never been disapointed. He is quick with e-mails and getting stuff out to those that order. He is tops in my book.

AKAWilliamUlfer

I used double layer black sail cloth on COPs. I use a sharpened ice pick to push through the fabric. What I do different than most is I use a leather washer between the rivet and the cloth. The washer is slightly bigger than the rivet to keep it from cutting the fabric. I have used double layer 10 o...

AKAWilliamUlfer

Halberds here on AA is selling helm kits for a very reasonable price. They need to be dished and riveted together. At $85.00 plus shipping you can't beat it with a stick.

viewtopic.php?f=3&t=169397

AKAWilliamUlfer

I was hoping for the trade factor, I'll have to pass the funds just aren't available. Thanks for putting them up. I'm sure some one will take them.

AKAWilliamUlfer

I have a zweihammer stainless gauntlet kit. I have formed the thumbs and cuff already, but the whole kit is there.

Re: Spring legs

Re: Spring legs

Re: Stainless Knees, Elbows, and Shoulders

Re: Full set Kydex Alchemy armor for sale

Re: Full set Kydex Alchemy armor for sale

Re: Beautiful German Onion Top Pigface Bascinet from Hammerb

Re: Full set Kydex Alchemy armor for sale

Beautiful German Onion Top Pigface Bascinet from Hammerbreak

Starter Helm for sale

Solid Ashcroft Baker helm for sale

Full set Kydex Alchemy armor for sale

Re: Torvaldr medical update and Left over Pennsic Inventory

Re: Stonekeep Armory- Old INstock Liquidation

Re: Huge piece of leather FS (or maaaaaaybe trade)

Re: Silver plating brass

Re: Silver plating brass

Re: selling two helms and garb for smaller sized scadians

Re: How does one clean and polish and old Knotwolf

Re: Buying a HF Throatless Shear

Re: Made some tools for a member.

Re: removable klapplvisor hinge

Re: Made some tools for a member.

Re: A few quick questions on COP construction.

Re: Viking Leathercrafts Update

Re: Review of Torvaldr double layer Bazubands

Re: FS: Portable holes

B3 beverly on Ebay

Re: wonder what I can make from this?

Re: Chin strap

Re: Stainless steel Vervailles?

Re: Tool Review: Halberds. I couldnt be Happier

Re: Question on Using Canvas

Re: Wanted - Starter Helms

Re: Dark Ages helmet castings

Re: Dark Ages helmet castings