I work pretty much only titanium but I am mostly retired these days.
I make a piece or two every now and then but lately not in any timely manner.
everything I make is custom and I do not carry any instock work.
am in Wa state.
mrks
Search
Search found 1806 matches
- Mon May 11, 2020 6:32 pm
- Forum: Classifieds / Want Ads
- Topic: Armorers that work in titanium?
- Replies: 5
- Views: 1539
- Mon Apr 27, 2020 8:08 pm
- Forum: Classifieds / Want Ads
- Topic: 18ga 301SS grounding fingertip DIY kit $60 instock/4/25/2020
- Replies: 40
- Views: 6572
Re: 18ga 301SS grounding fingertip DIY kit $70/$60 instock 7
bump still have these available folks.
just sold a set today.
mrks
just sold a set today.
mrks
- Wed Aug 21, 2019 9:46 am
- Forum: Armour - Design and Construction
- Topic: The story of "The Ugo's" First spring steel projec
- Replies: 35
- Views: 2808
Re: The story of "The Ugo's" First spring steel projec
where can I find ugo's story. I went a googled for it but can no longer find it.
someone wants me to make cased grieves out of Ti and I wanted to explain how difficult it might be.
not sure I can even do it?
mrks
someone wants me to make cased grieves out of Ti and I wanted to explain how difficult it might be.
not sure I can even do it?
mrks
- Wed Dec 12, 2018 7:36 pm
- Forum: Classifieds / Want Ads
- Topic: Who is making bazubands these days?
- Replies: 12
- Views: 2333
Re: Who is making bazubands these days?
hi there I use this pattern for the back of the bazubands. almost impossible to work the harder Ti alloys into the complex curve needed. the soft stuff is no problem but I stopped using the nondurable Ti 20 years ago. https://get.google.com/albumarchive/101582679491476465697/album/AF1QipOBgOQtXA8eZM...
- Wed Dec 12, 2018 12:18 pm
- Forum: Classifieds / Want Ads
- Topic: Who is making bazubands these days?
- Replies: 12
- Views: 2333
Re: Who is making bazubands these days?
I just came up with a new pattern for a soupcan titanium bauzuband.
22ga(.032) weights 1/2lb each.
have one pair available that was custom made to bad measurements.
will post pics, dimensions and measurements later today.
MRKS
22ga(.032) weights 1/2lb each.
have one pair available that was custom made to bad measurements.
will post pics, dimensions and measurements later today.
MRKS
- Fri Jul 27, 2018 2:50 pm
- Forum: Classifieds / Want Ads
- Topic: 18ga 301SS grounding fingertip DIY kit $60 instock/4/25/2020
- Replies: 40
- Views: 6572
Re: 18ga 301SS grounding fingertip DIY kit $70/$60 instock
hi there
as of 7 27 18 I have 5 kits available for same day/next day shipping.
I use 2-3 day priority mail and shipping cost is included.
mrks
as of 7 27 18 I have 5 kits available for same day/next day shipping.
I use 2-3 day priority mail and shipping cost is included.
mrks
- Sun May 06, 2018 11:02 am
- Forum: Armour - Design and Construction
- Topic: Armouring As A Career
- Replies: 87
- Views: 22616
Re: Armouring As A Career
as any armoury ever turned a profit? Foreign or domestic? Has any armourer ever gotten rich? Foreign or domestic? Does anyone know of an amourer that has ever gotten investment capital with an actual business plan? Foreign or domestic? yes I made a profit every year when I was working full time. usu...
- Fri Apr 21, 2017 11:22 am
- Forum: Classifieds / Want Ads
- Topic: done
- Replies: 1
- Views: 535
done
thanks
- Fri Mar 17, 2017 1:57 pm
- Forum: Medieval Combat and Weapons
- Topic: Rattan basket hilt size
- Replies: 19
- Views: 3944
Re: Rattan basket hilt size
some fighters do not like any sort of binding in their cup hilts.
that means if the hilt touches their hand it is "binding"
others like them tight.
that means if the hilt touches their hand it is "binding"
others like them tight.
- Wed Feb 22, 2017 11:07 am
- Forum: Classifieds / Want Ads
- Topic: sold: 18ga Titanium Articulating Shoulder Cops SCA
- Replies: 4
- Views: 581
Re: 18ga Titanium Articulating Shoulder Cops SCA
sold. incoming PM
- Tue Feb 21, 2017 5:03 pm
- Forum: Classifieds / Want Ads
- Topic: sold: 18ga Titanium Articulating Shoulder Cops SCA
- Replies: 4
- Views: 581
Re: 18ga Titanium Articulating Shoulder Cops SCA
Fixed: thanks now I need to go through my entire album and reset viewing permissions.
I miss the old google picassa.
I miss the old google picassa.
- Tue Feb 21, 2017 12:40 pm
- Forum: Classifieds / Want Ads
- Topic: sold: 18ga Titanium Articulating Shoulder Cops SCA
- Replies: 4
- Views: 581
sold: 18ga Titanium Articulating Shoulder Cops SCA
one pair of 18ga titanium articulating shoulder cops. $225 plus 13 shipping. works best for someone who doesn't wear shoulder protection and wants protection without encumbrance. they weigh 1/2 to 5/8ths pound with stainless rivets and washers. won't rust or dent when used in rattan combat. after ye...
- Sat Nov 12, 2016 3:43 am
- Forum: Armour - Design and Construction
- Topic: Armor design tips for someone who's small
- Replies: 13
- Views: 1015
Re: Armor design tips for someone who's small
you have some limitations to overcome if you want to fight competitively. if you just want to have fun you can approach 1/2 your weight but it will slow down your skill progression and while fun tire you out much quicker. you will need an accurate scale to find your taw(total armour weight) bruising...
- Tue Oct 11, 2016 8:55 pm
- Forum: Classifieds / Want Ads
- Topic: Trying to find SirMRKS To PM
- Replies: 1
- Views: 312
Re: Trying to find SirMRKS To PM
hi there
you can pm me or we can hold a discussion on the message board: your choice.
mrks aka sirmrks
you can pm me or we can hold a discussion on the message board: your choice.
mrks aka sirmrks
- Thu Sep 22, 2016 8:15 pm
- Forum: Classifieds / Want Ads
- Topic: WTB THINNER Aluminum shields
- Replies: 14
- Views: 1419
Re: WTB THINNER Aluminum shields
titanium is 40 percent heavier than aluminum and needs to be at least 18ga to hold it s shape and not warp. without any kind of work hardening it is floppy when too long. I reinforced the edged of my 2 titanium shields with .010 Ti and decided they were not light enough 9lbs+ at 22" by 33". my subse...
- Fri Aug 12, 2016 8:27 am
- Forum: Classifieds / Want Ads
- Topic: LF/WTB cheap aluminum (or plastic?) simple shoulders/elbows
- Replies: 8
- Views: 771
Re: LF/WTB cheap aluminum (or plastic?) simple shoulders/elb
duke baldar makes a inexpensive pair of elbow cops: http://www.shop.mastereirik.com/Armor_c15.htm
not sure where you can get plastic shoulder cops.
I make titanium cops and shoulders but they are not cheap.
mrks
not sure where you can get plastic shoulder cops.
I make titanium cops and shoulders but they are not cheap.
mrks
- Wed Aug 10, 2016 2:28 pm
- Forum: Armour - Design and Construction
- Topic: Kettle Helm hitting bridge of nose
- Replies: 8
- Views: 778
Re: Kettle Helm hitting bridge of nose
forehead padding might help.
needs to be contact cemented in so it does not move:
https://lh3.googleusercontent.com/Vm6nX ... 1688-rw-no
needs to be contact cemented in so it does not move:
https://lh3.googleusercontent.com/Vm6nX ... 1688-rw-no
- Sat Jul 30, 2016 3:40 pm
- Forum: Classifieds / Want Ads
- Topic: 18ga 301SS grounding fingertip DIY kit $60 instock/4/25/2020
- Replies: 40
- Views: 6572
Re: 18ga 301SS grounding fingertip DIY kit $70/$60 instock
hi there I do not offer a full finger kit. just gadlings and fingertips which can each be ordered separately. fingertips are still the same price: I am offering unfinished fully pressed Spring Stainless** 301 fingertips that are very tough and have been fought in for years now . specs are: .050/18ga...
- Sun Jul 24, 2016 1:01 pm
- Forum: Classifieds / Want Ads
- Topic: Finger gauntlet kits?
- Replies: 8
- Views: 558
Re: Finger gauntlet kits?
"mrks occasionally has titanium kits" hi there... sadly I am no longer offering titanium fingers. they are just too damn hard to make and the 301 full hard(sometimes called spring but it is technically not) 301 fingers look better and draw deeper with a close enough toughness. I offer a do it yourse...
- Wed Jun 08, 2016 9:39 pm
- Forum: Armour - Design and Construction
- Topic: why is it...........
- Replies: 15
- Views: 1182
Re: why is it...........
pretty much everything I make is custom and I don't take commissions.
the trick is getting me to agree to make you something
the trick is getting me to agree to make you something
- Mon Jun 06, 2016 11:44 am
- Forum: Classifieds / Want Ads
- Topic: helmet padding
- Replies: 3
- Views: 632
Re: helmet padding
Oregon aero pads.
http://www.oregonaero.com/military
http://www.oregonaero.com/military
- Sat Jun 04, 2016 12:59 pm
- Forum: Armour - Design and Construction
- Topic: Sir mrks question
- Replies: 4
- Views: 547
Re: Sir mrks question
hi there I am pretty busy right now and will most likely be that way through the summer. my phase converter died and I lost the neutral to my shop so my big armour machines were useless for 5 months. everything is fixed now but I am pretty much behind even though I never take orders, commissions or ...
- Sat Jun 04, 2016 12:54 pm
- Forum: Armour - Design and Construction
- Topic: Sir mrks question
- Replies: 4
- Views: 547
Re: Sir mrks question
hi there I am pretty busy right now and will most likely be that way through the summer. my phase converter died and I lost the neutral to my shop so my big armour machines were useless for 5 months. it is fixed now but I am pretty much behind even though I never take orders or money down some pics ...
- Sat May 21, 2016 12:07 pm
- Forum: Armour - Design and Construction
- Topic: titanium segmentata?
- Replies: 14
- Views: 1185
Re: titanium segmentata?
titanium: no maintenance, no dents, no rust.
what is not to be liked if you fight all the time and do not have a bunch of servants to maintain your armour?
edit: forgot equivalent gauge of metal is 40 percent lighter than stainless
what is not to be liked if you fight all the time and do not have a bunch of servants to maintain your armour?
edit: forgot equivalent gauge of metal is 40 percent lighter than stainless
- Thu Mar 31, 2016 8:53 pm
- Forum: Armour - Design and Construction
- Topic: Spring stainless material question
- Replies: 7
- Views: 800
Re: Spring stainless material question
slice of stainless sells a 3 by 4 301 FH .032 sheet for around $113.00bucks
http://sliceofstainless.com/product/301 ... eel-sheet/
http://sliceofstainless.com/product/301 ... eel-sheet/
- Fri Mar 18, 2016 12:41 am
- Forum: Armour - Design and Construction
- Topic: Grip trouble with my gauntlets.
- Replies: 10
- Views: 839
Re: Grip trouble with my gauntlets.
because of the angle of the hand if your gauntlet does not follow this angle your pinky will not be able to fully close.
you can solve the problem by letting the pinky finger float free. and not be sewn down to the gauntlet.
you can solve the problem by letting the pinky finger float free. and not be sewn down to the gauntlet.
- Tue Mar 08, 2016 2:38 pm
- Forum: Armour - Design and Construction
- Topic: Different thickness of metals on one gauntlet?
- Replies: 3
- Views: 504
Re: Different thickness of metals on one gauntlet?
I do.
16ga Ti knuckle bar.
18ga Ti for the rest.
lightest pair of finger gaunts I ever made had different gauges and weighed 5/8ths of a pound.
they were not very protective.
16ga Ti knuckle bar.
18ga Ti for the rest.
lightest pair of finger gaunts I ever made had different gauges and weighed 5/8ths of a pound.
they were not very protective.
- Wed Feb 17, 2016 9:09 pm
- Forum: Classifieds / Want Ads
- Topic: BUYER BEWARE: Scott Podojil /smiling Orc armoury
- Replies: 47
- Views: 9032
Re: BUYER BEWARE: Scott Podojil /smiling Orc armoury
some of us SCA armourers never ever ever take money down
but then we refuse work left and right sometimes...
mrks
but then we refuse work left and right sometimes...
mrks
- Thu Feb 11, 2016 7:24 pm
- Forum: Classifieds / Want Ads
- Topic: Valentine's metal roses, anyone?
- Replies: 16
- Views: 1132
Re: Valentine's metal roses, anyone?
WOW I will give my rose a 5 stars. review. have wanted one for years but kept forgetting... my nickle silver rose arrived today. it is way nicer than I though it would be. the picture does not do it justice. the rose dimensions are about 3 1/2 to 4 inches across and it is abut 10 inches high? left i...
- Wed Feb 03, 2016 1:08 pm
- Forum: Classifieds / Want Ads
- Topic: Valentine's metal roses, anyone?
- Replies: 16
- Views: 1132
Re: Valentine's metal roses, anyone?
I would like a Nickel-Silver Rose Bloom Triple Leaves.
PM incoming
thanks
mrks
PM incoming
thanks
mrks
- Tue Feb 02, 2016 2:43 pm
- Forum: Classifieds / Want Ads
- Topic: Possible new armory Gauging interest.
- Replies: 14
- Views: 1354
Re: Possible new armory Gauging interest.
that is the right thinking.
never ever ever ever cash the check or use the money until the customer says he is satisfied.
will keep you out of trouble finance wise.
do not be afraid to stop taking orders if you get to many orders due to low prices.
put them on a wait list instead.
good luck
never ever ever ever cash the check or use the money until the customer says he is satisfied.
will keep you out of trouble finance wise.
do not be afraid to stop taking orders if you get to many orders due to low prices.
put them on a wait list instead.
good luck
- Fri Jan 29, 2016 5:30 pm
- Forum: Classifieds / Want Ads
- Topic: Valentine's metal roses, anyone?
- Replies: 16
- Views: 1132
Re: Valentine's metal roses, anyone?
very nice work.
I am interested.
might be a few days.
would want the nickel silver triple leaf.
mrks
I am interested.
might be a few days.
would want the nickel silver triple leaf.
mrks
- Thu Dec 24, 2015 1:13 pm
- Forum: Classifieds / Want Ads
- Topic: sold: 18ga Titanium basket hilt. $125
- Replies: 1
- Views: 479
Re: 18ga Titanium basket hilt. $125
sold thanks...
- Thu Dec 17, 2015 2:42 pm
- Forum: Classifieds / Want Ads
- Topic: sold: 18ga Titanium basket hilt. $125
- Replies: 1
- Views: 479
sold: 18ga Titanium basket hilt. $125
18ga Titanium basket hilt. $125 plus 10 shipping construction: 18ga Titanium and stainless rivets. weight 5/8ths of a pound. https://lh3.googleusercontent.com/-WrNFXNW6ZXM/VnMW-9Wz1oI/AAAAAAAADCw/ZTblgwwoRxA/s720-Ic42/IMG_2623.JPG https://lh3.googleusercontent.com/-8pKPBtQQEUM/VnMWHu-XLTI/AAAAAAAADC...
- Mon Nov 16, 2015 1:37 pm
- Forum: Armour - Design and Construction
- Topic: Score! (or; what do you think of these ovens?)
- Replies: 11
- Views: 824
Re: Score! (or; what do you think of these ovens?)
wow you are lucky.
I have to use a phase converter and they are expensive.
my current setup just blew up so I cant use my 7 1/2hp buffer or either of my 5hp grinders because they are 3 phase.
this is the second phase converter in 22 years so they are pretty reliable.
mrks
I have to use a phase converter and they are expensive.
my current setup just blew up so I cant use my 7 1/2hp buffer or either of my 5hp grinders because they are 3 phase.
this is the second phase converter in 22 years so they are pretty reliable.
mrks