The Armour Archive

Llewelyn Gododdin

Hey Folks, I need to get some cash flow going so even though I hate to do it I have a double bell wedge tent made by panther pavillions FS. It is used but in good condition and I made some easy to assemble segmented wooden poles with steel collars to hold everything together and some steel tent stak...

Llewelyn Gododdin

Thanks Pb! after looking at what others priced their spring steel knees
I will let these go for 125 shipped CONUS
Im still trying to get the hang of pricing spring steel.

Llewelyn Gododdin

Hey Folks, I have a set of 15th century articulated knees FS they are made from 19g 1050 tempered to be a little extra springy. I was going to use these myself but I must convince myself to finish my 16th century rig... They measure like 5.5" across and are chemically blackened. I would like 175 dol...

Llewelyn Gododdin

Hey Folks, I am making a set of 19g 410 spring stainless soupcan knee cops out of the same pattern I did this aluminum set out of http://www.flickr.com/photos/40421015@N02/5902930928/ I should have them done this week, I would like to sell them for 200 dollars, The 410 is really costly for me to tem...

Llewelyn Gododdin

they are 19g and weigh like a pound and a half each, crazy light for the amount of protection they offer

Llewelyn Gododdin

Hmmmm I could

Llewelyn Gododdin

Actually I was looking these over and realize that 200 may be a bit much for these the articulation is a bit stiff and the finish is rough I think 100 is a better number. so if someone wants these I will let them go for 100

Llewelyn Gododdin

also open to trades or offers

Llewelyn Gododdin

Hey folks, I just made a set of 1050 spring steel knees they are hardened to 1600 then tempered to 650 in an electric kiln. These are a size medium with 3 lame articulation and a rondel. The finish is a rough from the hammer with an acid blueing, the inside is painted and not strapped but the holes ...

Llewelyn Gododdin

Thanks Im glad you liked them ! I stll have some more left for anyone else that wants them

Llewelyn Gododdin

Hey folks, I made a few prototypes out of street sign for come couters and spaulders, for someone who wants the german look and does not have allot of cash this cold be a decent set. The second spulder needs to be put together but I will send the rivets along with them. Of course it is street sign a...

Llewelyn Gododdin

I use mine for cut and thrust they hold up well

Llewelyn Gododdin

Sallet is gorgeous!

Llewelyn Gododdin

Ah! +1 kult of athena

Llewelyn Gododdin

I have a few I want to get rid of cheap http://www.flickr.com/photos/40421015@N02/8673267432/ I would assume you would only want the first two as they are complete 25 for the two plus shipping if your interested.

Llewelyn Gododdin

Hey folks I just finished up another fencing two hander pics here http://www.flickr.com/photos/40421015@N02/9618367888/ I use Alchem blades with my own quillions/pommels, sizes sizes weights can vary slightly depending on preference this one has a 38" blade and is 48" over all and weighs 2 pounds 11...

Llewelyn Gododdin

Style number 2 finished 300 g

http://www.flickr.com/photos/40421015@N02/9618370408/

Llewelyn Gododdin

I do whatever you want or slot it for a tang

Llewelyn Gododdin

Just cleaned up a two handed pommel, I took more off then I needed to but the weight came in at 360g down from 416g Pic here http://www.flickr.com/photos/40421015@N02/9607966873/

Llewelyn Gododdin

Thanks! I will post some finished pics of some swords I make with these.

Llewelyn Gododdin

1.5 at the widest the base is like 5/8+ at the base sorry I put down the wrong measurement

Llewelyn Gododdin

stats here
1. 3"long by 2" wide 416g
2. 2.5" long but 1.5 wide 330g
3. 2 "long by 1.5 wide 243g
4. 1.5" long by 2" wide 243g

all pommels will lose about 15% or more when they are ground and polished

so you asked about #2 do you need more measurements?

Llewelyn Gododdin

Hey Folks, I made a run of pommels for rapier /cut and thrust / live steel. I can send out some measurements or weights on request. The first one is a two hander pommel the rest are for rapier or single handed broad swords. pics here http://www.flickr.com/photos/40421015@N02/9603302830/ They are all...

Llewelyn Gododdin

Bump and I will ship conus for 15 dollars

Llewelyn Gododdin

can we get a side view of the sallet?

Llewelyn Gododdin

I will kick kit off at 55

Llewelyn Gododdin

Hey folks Im looking for a maille standard, preferably welded or riveted stainless but will consider riveted mild. I can make some other armour or weapons in trade. some pics of my work here http://www.flickr.com/photos/40421015@N02/

Thanks!

Llewelyn Gododdin

Hey folks a number of people have been asking about ordering dishing forms, at this point all of the first order has been sent out so figure a month and a week to get them cast and sent. Is there enough interest to put in another order? If I can get 3 or 4 sets pre ordered I will do another run. any...

Llewelyn Gododdin

I might what are you looking for?

Llewelyn Gododdin

one more pic http://www.flickr.com/photos/40421015@N ... otostream/

Llewelyn Gododdin

Hey Folks, I have a fencing saber I made for sale, the blade is from alchem the hilt and pommel are bronze that I lost wax cast and the handle is elk antler. The over all length is 38" the weight is 2.2 pounds. Pics here http://www.flickr.com/photos/40421015@N02/8518698913/in/photostream/ I would li...

Llewelyn Gododdin

Llewelyn Gododdin

I have one "factory second" 6" form that I can let go for 40 it has a hollow to the underside but otherwise it is in perfectly usable condition

Llewelyn Gododdin

Ok so I made a slight miscalculation on the shipping price and I forgot to include insurance which is an 5.50 per package. I would not expect anyone to pay any more then what they already paid but it means I have to wait to ship the rest out until payday. I have already sent over half of the package...

Llewelyn Gododdin

I just ran the numbers it looks like it is actually 28.50 for shipping Dang I was way off!

Panther Double Bell Wedge FS! Price drop! Make an offer!

Re: 15th century knees FS! Price Drop

15th century knees FS! Price Drop

410 stainless soupcan knees FS

Re: 1050 spring steel knees FS

Re: 1050 spring steel knees FS

Re: 1050 spring steel knees FS

Re: 1050 spring steel knees FS

1050 spring steel knees FS

Re: Sword pommels FS!

Street sign gothic arms FS

Re: New two handed fencing swords line.

Re: A lot of stuff for sale. Lost customer.

Re: sword hangers for the wall. who would you recommend?

Re: sword hangers for the wall. who would you recommend?

New two handed fencing swords line.

Re: Sword pommels FS!

Re: Sword pommels FS!

Re: Sword pommels FS!

Re: Sword pommels FS!

Re: Sword pommels FS!

Re: Sword pommels FS!

Sword pommels FS!

Re: Harbor Freight throatless bench shear FS Pics added!

Re: Auction: Sallet needing TLC

Re: Auction: Sallet needing TLC

Anyone have a standard they want to trade?

Another dishing form order?

Re: Rapiers

Re: Fencing Saber FS!

Fencing Saber FS!

Re: Harbor Freight throatless bench shear FS Pics added!

Re: Ductile iron dishing forms. Shipping Update!

Re: Ductile iron dishing forms. Shipping Update!

Re: Harbor Freight throatless bench shear FS Pics added!