The Armour Archive

Sevastian

Good to know. I'll look into a no. 8.

Sevastian

So I'm going to be making more helmets in mild and stainless, mostly 14 gauge. Is a Roper Whitney no. 5 enough for this task? I will be punching 3/16" holes for the most part. Also, who is the best to buy punches and dies from? Any input is greatly appreciated!

Sevastian

Viking and Rus occulars/nasals and cheek pieces in 14 gauge mild would be awesome. It's a pain to cut out occulars with limited tools and tight radius cuts in some cheek pieces like the Vendel 14 I'm currently working on. Spangen tops in 14 gauge would probably sell for those who want to make their ...

Sevastian

Schöne Arbeit. At least I hope thats how its said. Beautiful. Please post pics when its done!

Sevastian

http://www.vikingleathercrafts.com and Boots by Bohemond

Sevastian

Heatgun to form the plates and shoulder cops. I've found that cold water as a sort of quench will set the piece in it's new shape quickly.

Sevastian

for someone 60-70kg (under breast girth up to 94cm, waist up to 85cm)

Sevastian

Accdntprone's stuff gets even more badder ass every time I check out this forum. I'd buy one were I not trying to corner the local helmet market. Accdnt, do you rock aught else aside from helmets? P.S. One of his earlier helmets is still going strong up here despite our best efforts. Buy with confid...

Sevastian

I have seen his work in person.

I am not worthy. That is all.

Sevastian

It looks like Dave's work before he left to start Aesyr Metalwyrks. It's worth the asking price in good shape but the required TLC might scare off buyers. I know its OBO, out of curiosity why haven't you repaired the popped and loose rivets?

Sevastian

I just used a 40 grit flap wheel in my angle grinder. Took my time with it and ended up with a nice, uniform dish.

Sevastian

I've done two helmets with a leather strip and one using verveilles and wire. The leather strip is a battle proven method. The vervielle/wire method is currently an unknown to me with regard to durability as that helmet went to a beginner who hasn't used it yet. Just my 2 cents.

Sevastian

I won this beauty made by Iron Badger recently and it arrived today. viewtopic.php?f=3&t=172023
The pics don't do it justice and it was a nice surprise for my Wife. Buy from him or bid with confidence. You won't be disappointed!

Sevastian

If you use slats you can go as light as 14 gauge provided you give them some shape. Invest in a set of Clecos for 3/16ths holes. You can use appropriately sized nuts and screws but they will wear out fast and the Clecos are much faster. Halberds is the spangen master, maybe he'll pipe in.

Sevastian

Красива робота.

Sevastian

http://www.armourarchive.org/patterns/n ... _halberds/

Sevastian

Inexpensive is a relative term. Accdntprone or Hjalmr can't be beat for solid starter helmets. I sold a Rus helmet to a beginner for a LOT more than what either of those fine Gentlemen charge for their excellent helmets. Do you have a budget in mind?

P.S. Otto rocks an awesome starter helmet as well!

Sevastian

I don't know how you do it, Hjalmr. That is A Lot of helmet for the money!

Sevastian

More Ghostpig awesomeness! I will be following this thread!

Sevastian

Sevastian

Wootwoot! Payment sent!

Sevastian

Still contemplating a kinjal, yes. I need to make a helmet or two first.

Sevastian

Thank god its too small for me!!

Sevastian

Damn my lack of funds. Wow! What size is this?

Sevastian

$50
*Edit* I keep getting compliments on the seax I bought from you earlier. This would make a great addition to my Wife's kit!

Sevastian

Price?
*edit* Price is listed at $900 on the website.

Sevastian

This was my experience. There aren't any items "in stock". It's a bit misleading but the turnaround was quick and communication was prompt.

Sevastian

Pretty sure I read that he got a huge movie order and was working on getting caught up. I'm sure he'll get back to you.

Sevastian

knotwolf wrote:For most of my helms, some WD-40 or the like and a scrubbing with an old scotch-brite pad does the trick. Dissolves old tape goo pretty well & throws a decent sheen on the bronzes without getting all super-shiney.

Drop me a line if you have any specific questions.

R

/\This+1!

Sevastian

I just used my 16oz ball pien hammer and a super small depression in my birch stump for the 18 gauge stainless versions I made. My second one turned out better naturally. Perhaps starting the dishing or raising deeper into the lame if that makes sense?

Sevastian

I've always loved the clean no-nonsense look of your helmets, Otto. One of these completely blackened and assembled with brass rivets would be slick(hint, hint). Keep up the good work!

Sevastian

I will be putting a simple Norman SS conical together soon but it would probably be priced out of range. Having said, that if a conical top can be found Performancechainmaille sells mild steel aventails for $125 plus shipping IIRC.

Sevastian

What is his budget, roughly? What size would he need? Is there anyone local who might be able to help assemble a helm out of parts? If not, Hjalmr here on the Archive or possibly Accdntprone would be able to help.

Sevastian

Very interested. I assume these are made to order? If so, what is your production time?

Sevastian

I currently wear my Windrose Armoury COP over a Zoombang shirt with a linengarb tunic over both. Hides well though I'm SCA size small at 6'3" 230lbs. I believe Pitbull here on the forum sells patterns for COPs, arm and leg armor.

Re: The right punch

The right punch

Re: Custom Plasma Cutting Services for the Armourer's Commun

Re: heavy gjermundbu styled helmet- Jan Schrader

Re: WTB: Boots for SCA heavy Fighting

Re: Plans for a coat of plates of sorts

Re: WTS: used Lorica Segmentata

Re: up coming starter helm run

Re: Anyone heard of an armourer called "Ugo"?

Re: SS Windrose Viking/Varangian Helm w/ SS Aventail - $800

Re: dishing stump.

Re: In need of Norman helmet pattern

Iron Badger positive review

Re: In need of Norman helmet pattern

Re: >>>AUCTION<<< FS: Russian style helmet for SCA.

Re: In need of Norman helmet pattern

Re: Looking for starter helmet

Re: FS: 14g Mild Steel Crusader Helmet 27" IC, $100

Re: My work, new spangen in prog. (06-30-14)

Re: Positive Review of Llewelyn Gododdin

Re: Sold- small/medium seax auction closed

Re: small/medium seax auction

Re: -= Titanium Lamellar =- For Sale

Re: -= Titanium Lamellar =- For Sale

Re: small/medium seax auction

Re: FS - Stainless darkened Spangen

Re: anyone having any issues with Allbeststuff.com?

Re: Viking leather

Re: How does one clean and polish and old Knotwolf

Re: Zweihammer armoury gauntlets from PBForge

Re: Two tone norse helm

Re: 11th-12thC Byz helm, need ideas to help a friend

Re: 11th-12thC Byz helm, need ideas to help a friend

Re: Flat riveted ss aventail from The Saxons Pocket

Re: Hidden Armor Advice for a Norse Persona?