Roman mail

This forum is designed to help us spread the knowledge of armouring.
Post Reply
Baron Alcyoneus
Archive Member
Posts: 39578
Joined: Tue Sep 23, 2008 7:00 pm

Roman mail

Post by Baron Alcyoneus »

I was going through my book on Dura-Europos and thought I'd pass on a bit on the surviving mail bits.

Most rings were between 7-10mm in diameter, and the wire was between 1-1.5mm thick.

There was plenty of decorative edging in copper alloy rings, and with the exception of a few stamped pieces, the CA was almost entirely of butted construction.
Vypadni z mého trávník!

Does loyalty trump truth?

"If they hurt you, hurt them back. If they kill you, walk it off."- Captain America
Armourkris
Archive Member
Posts: 1412
Joined: Sat Feb 03, 2001 2:01 am
Location: vancouver, BC.

Post by Armourkris »

the CA?
you lost me there.

Edited to add..

wait, i get it, CA = Copper alloy
http://www.sluggy.com
Is it not nifty? Worship the comic
Konstantin the Red
Archive Member
Posts: 26713
Joined: Sun Oct 21, 2001 1:01 am
Location: Port Hueneme CA USA

Post by Konstantin the Red »

Maybe he shoulda wrote Cu for Cuprum.
lorenzo
Archive Member
Posts: 114
Joined: Tue Feb 27, 2001 2:01 am
Location: Saskatoon, Sk., Canada

Post by lorenzo »

Have some pictures, found this in the Louvre a couple years back.

"Italian sword belt 4th century B.C. The lower part of the sword belt was modified: the holes that originally allowed the fixing of the lining were eliminated and replaced by other holes, rudimentarily pierced, allowing the suspension of a metallic maille which echoes the elements of 7th century B.C. feminine jewelry. The era in which this decorative intervention happened remains unknown."
Attachments
Front view.
Front view.
n698015934_1312578_301.jpg (54.79 KiB) Viewed 204 times
Close up of rings.
Close up of rings.
n698015934_1312582_1693.jpg (55.65 KiB) Viewed 204 times
Post Reply