Mrks, I finished my knee cop>>

Barry · Post by **Barry** » Sat Jan 18, 2003 3:54 pm

Ok, I've done the cop. The finishing may be a little rough. Comments? is it deep enough?

Link here: http://groups.msn.com/FreeKingdom/shoebox.msnw?Page=Last

Hugo de Stonham · Post by **Hugo de Stonham** » Sat Jan 18, 2003 4:10 pm

looks good. Its about the same depth as mine are that I am currently working on and the articulation is pretty good.
I wish I could make my knee cops look that good.

Grendal,

mrks · Post by **mrks** » Sat Jan 18, 2003 4:29 pm

hi there

thats really nice.

looks good pattern wise.

the cop is deeper than I can dish in titanium but thats good.. if it has the dimensions I gave you it should work well.

time to punch/drill holes and get to articulating. dont be afraid to reuse your earlier lames. dont rivet them onto the cop but practice with them.

good rivets from http://www.rjleahy.com/Techcenter/rivets/ will help.

have better webcam program now. msn net meeting has much faster frames per second.

there are many variables to articulation and I did not explain them all. if you have problems let me know.

------------------
mrks
squire to sir aveloc
tiarmour.com ==>> maker of fine Titanium armour

[This message has been edited by mrks (edited 01-18-2003).]

mrks · Post by **mrks** » Wed Jan 22, 2003 2:25 pm

bump

how is your project progressing?

------------------
mrks
squire to sir aveloc
tiarmour.com ==>> maker of fine Titanium armour

Barry · Post by **Barry** » Wed Jan 22, 2003 3:23 pm

unfortunately, I have been too busy to work whit it but I will continue at weekend. I'll let you know how its turning out.

Barry · Post by **Barry** » Wed Jan 22, 2003 3:35 pm

Oh, and by the way, my grandmother is heading to San Fransisco to meet my aunt(my personal USA-contact) who lives there. I gaved her an order to bring some rivets from R.J. Leahy's when she comes back

mrks · Post by **mrks** » Thu Jan 23, 2003 4:36 am

hey thanks am very curious as to how it will go.

had a guy from the archive for an articulation and dishing lesson. hes a student so pretty bust too.

great on the rivets... you will need them. hehe

good luck

------------------
mrks
squire to sir aveloc
tiarmour.com ==>> maker of fine Titanium armour

[This message has been edited by mrks (edited 01-23-2003).]