Page 1 of 1

Butt Spikes on Two-Handed swords

Posted: Wed Apr 29, 2015 3:01 pm
by Thomas MacFinn
I'm not a fan of butt spikes, so I never thought of this question until somebody else asked me...

It is common for many people to shave down the grip of their swords to better fit in the hand. In those kingdoms that allow butt spikes on two-handed swords, is a thin grip allowed if the area under the spike remains over 1.25" ?

Re: Butt Spikes on Two-Handed swords

Posted: Wed Apr 29, 2015 4:39 pm
by HROTHGAR/RPN416
you can shave down as much as you want as long as the diameter of the butt spike is with in regulation you are fine

Re: Butt Spikes on Two-Handed swords

Posted: Wed Apr 29, 2015 5:31 pm
by losthelm
Half swording and butt spikes vary a little between kingdomes.
Also plan on variations at larger interkingdom events like pennsic.

Re: Butt Spikes on Two-Handed swords

Posted: Wed Apr 29, 2015 6:47 pm
by Thomas MacFinn
Losthelm, do East kingdom standatds agree with what Hrothgar said applied in Atlantia?

Re: Butt Spikes on Two-Handed swords

Posted: Wed Apr 29, 2015 7:33 pm
by losthelm
interesting, it looks like east allows butt spikes.

Midrelm does also but has a ruling against weapons with a 360 degree striking surface.
To me that sounds a lot like the Kong/potato sorter maces.
Though the PDF maybe out of date.

The info is fairly easy to find under the earl marshals portion of the kingdom webpage.

Some events/tournaments use the rules of the hoast kingdom or have other restrictions.

At times the "rules" will have an appended/addendum that covers changes between updates.
When in doubt ask the MIC

Re: Butt Spikes on Two-Handed swords

Posted: Thu Apr 30, 2015 5:11 pm
by dukelogan
this is not correct. no offensive part of a weapon may be less than 1.25", striking or thrusting.

regards
logan
HROTHGAR/RPN416 wrote:you can shave down as much as you want as long as the diameter of the butt spike is with in regulation you are fine

Re: Butt Spikes on Two-Handed swords

Posted: Thu Apr 30, 2015 5:58 pm
by HROTHGAR/RPN416
that's what I meant your grace as long as the tip is regulation the handle can be as skinny as you like ,is that not correct? At least in our kingdom??

Re: Butt Spikes on Two-Handed swords

Posted: Thu Apr 30, 2015 7:26 pm
by dukelogan
ahh gotcha. i took "butt spike" to mean the padded striking surface, not the end of the rattan. the end of the rattan must be no less than 1.25" the "handle" can be as skinny as you wish.

regards
logan
HROTHGAR/RPN416 wrote:that's what I meant your grace as long as the tip is regulation the handle can be as skinny as you like ,is that not correct? At least in our kingdom??