Looking for Bulk Orders of Welded Stainless Mail

For trading/Selling/and posting items that you need very badly.
Post Reply
User avatar
Atlanta Armory
Archive Member
Posts: 711
Joined: Sun Jan 06, 2008 12:03 pm
Location: Auburn, Alabama
Contact:

Looking for Bulk Orders of Welded Stainless Mail

Post by Atlanta Armory »

My production queue has grown rather short and I'm looking to lengthen it somewhat by getting some bulk orders for the following items in 3/16"ID stainless steel. I also will allow mixing and matching of items (normally I require multiple of each desired item). The following are available for bulk orders and are listed with bulk prices and total weight:

Short Aventail (32" neck, 60" outside edge, 7.2" wide) - $95, 1.5lb.
Long Aventail (Short aventail with a 7.2" high tube at the neck) - $150, 2.3lb.

Small Fauld (48" around, 21.5" high, split 7.5" from bottom) - $145, 3.6lb.
Large Fauld (Same as small fauld but 60" around at waist) - $175, 4.5lb.

Sleeves (10" long and fits up to am 18" bicep) - $50, 1lb.
Voiders (Sleeves that also cover the shoulder and below armpit) - $100, 1.4lb.

Shipping is not included but will be around $15 via USPS flat rate depending on the size of the order. All items in an order must be payed in a single payment and be shipped to a single address. I may require payment upfront but the full amount is fully refundable before shipment (it may take up to two weeks for refund to go through).

Further Discounts:

- Order 10 of any item and get 10% further off of that item.
- Get $10 off each fauld when matched with a pair of voiders.
- If you order $2000 or more I may bump the order to wholesale pricing and pay up to $50 shipping depending on the items being ordered.


Here is a comparison picture of the ring sizes I use (3/16", 5/32", and 3/32"):

Image

The surface finish will be burnished, which looks like aged mild steel:

Image

Please mention this post when ordering.
Cheers,
-Ben
http://www.AtlantaArmory.com The strongest, lightest chainmail.

http://auracing.org/
User avatar
Mad Matt
Archive Member
Posts: 7697
Joined: Thu Aug 10, 2000 1:01 am
Location: Ontario Canada
Contact:

Post by Mad Matt »

3/16 should say 3/8
The budding mid 14th century German Transitional guy.
MadMatt'sArmory.com
User avatar
Atlanta Armory
Archive Member
Posts: 711
Joined: Sun Jan 06, 2008 12:03 pm
Location: Auburn, Alabama
Contact:

Post by Atlanta Armory »

The rings are ~3/16" (5.6mm) ID. They are slightly smaller than the 6mm stuff from india but are less expensive and far lighter.

-Ben
Last edited by Atlanta Armory on Wed Jul 15, 2009 11:33 am, edited 1 time in total.
http://www.AtlantaArmory.com The strongest, lightest chainmail.

http://auracing.org/
User avatar
Mad Matt
Archive Member
Posts: 7697
Joined: Thu Aug 10, 2000 1:01 am
Location: Ontario Canada
Contact:

Post by Mad Matt »

Whoops the tape is narrow and threw me off was reading it wrong.
The budding mid 14th century German Transitional guy.
MadMatt'sArmory.com
User avatar
Edward MacTavish
Archive Member
Posts: 1846
Joined: Tue Oct 14, 2003 1:01 am
Location: Washington state
Contact:

Post by Edward MacTavish »

How much for a single tall aventail?

Edward
Sir Edward Lindey, Knight of the Drawn Sword. ACL/BotN 2012

Saint Hubert's Rangers

Men of steel, in suits of iron forged legends of valour untarnished by time.

Argent, a boar statant and on a chief gules an arrow Or
User avatar
Adamo
Archive Member
Posts: 936
Joined: Wed Mar 29, 2006 8:31 pm
Location: Rotterdam, NY

Post by Adamo »

What quantity is bulk?
Or did I miss that in the post?

Adam
User avatar
Atlanta Armory
Archive Member
Posts: 711
Joined: Sun Jan 06, 2008 12:03 pm
Location: Auburn, Alabama
Contact:

Post by Atlanta Armory »

Sorry, $500 and at least 5 items is the minimum for bulk orders for now (it'll go up after this sale ends).

A single long aventail would be $165.

-Ben

EDIT: Long aventail price was supposed to be $175, not $165. However, I'll let it stay that price for the rest of this sale.
http://www.AtlantaArmory.com The strongest, lightest chainmail.

http://auracing.org/
User avatar
Atlanta Armory
Archive Member
Posts: 711
Joined: Sun Jan 06, 2008 12:03 pm
Location: Auburn, Alabama
Contact:

Post by Atlanta Armory »

This 'sale' ends August 1st. The prices will still be the same (or similar) but the minumum order will be at least doubled to get the same price.

-Ben
http://www.AtlantaArmory.com The strongest, lightest chainmail.

http://auracing.org/
User avatar
Atlanta Armory
Archive Member
Posts: 711
Joined: Sun Jan 06, 2008 12:03 pm
Location: Auburn, Alabama
Contact:

Post by Atlanta Armory »

First to order will get wholesale pricing.

Also, there is enough 5/32" titanium to make one shirt (around 12 square feet), 3 pairs of voiders, or 4 short aventails. I will include the TI aventails and voiders in this sale.

-Ben
http://www.AtlantaArmory.com The strongest, lightest chainmail.

http://auracing.org/
User avatar
Atlanta Armory
Archive Member
Posts: 711
Joined: Sun Jan 06, 2008 12:03 pm
Location: Auburn, Alabama
Contact:

Post by Atlanta Armory »

Update: I have ordered enough material for several bulk orders and will not require any upfront payment for the next few orders.

-Ben
http://www.AtlantaArmory.com The strongest, lightest chainmail.

http://auracing.org/
Post Reply