The Armour Archive

hi there

I have four 14ga Stainless shield bosses left over from our kingdoms largest tourney this weekend.
<table><tr><td><a href="https://picasaweb.google.com/lh/photo/fHZzFMHMjkb_sBQdC11tMg?feat=embedwebsite"><img src="https://lh5.googleusercontent.com/_xijnVOFwTh4/SxA8ojJylCI/AAAAAAAAAcg/-Xy1jNvPVUQ/s400/sbinsun2.JPG" height="300" width="400"></a></td></tr><tr><td>From <a href="https://picasaweb.google.com/sirmrks/ShieldBoss?feat=embedwebsite">Shield Boss</a></td></tr></table>

they can also be modified to fit a curved shield.
<table><tr><td><a href="https://picasaweb.google.com/lh/photo/uyAPDyruGZmMolQzU0G5zg?feat=embedwebsite"><img src="https://lh5.googleusercontent.com/_xijnVOFwTh4/TRhjDjGOnyI/AAAAAAAABJ4/Mcc1xOV6KFE/s400/IMG_8899.JPG" height="300" width="400"></a></td></tr><tr><td>From <a href="https://picasaweb.google.com/sirmrks/CurvedShieldBoss?feat=embedwebsite">curved shield boss</a></td></tr></table>

pictures are not of exact bosses but they all turn out the same.

price is $60 plus 10 shipping.

specs: 14ga mirror polished Stainless Steel shield boss. It has been cold worked(no annealing for maximum work hardness) in a spiral sunk pattern by my four ton dishing machine and has eight copper rivet sized holes punched around the rim for mounting. Sinking is like raising in that it keeps the center of the boss at almost the full thickness so it is extremely dent resistant. it is about 1 3/4 inches deep and approximately 7 3/4 inches across. It weighs 1lb.

thanks for looking
mrks

If you still have them I'll take one.

PM me with how you want payment.

Regards,
Ulrich

pm sent.

bump.

I have two of these left and can ship today.