Page 1 of 1

WTB: Loose mail rings and rivets

Posted: Fri Feb 18, 2011 8:31 pm
by SirOlafr
I have a hauberk that could use some repair. I was able to purchase some rings a while back through a friend but the diameter ended up being too small. I need mild steel round (not flat) rings with an external diameter of 1/2 inch. I need corresponding dome rivets to go with the rings. Anyone sell these?

Olafr

Posted: Sat Feb 19, 2011 9:24 am
by SirOlafr
A little bump.