The Armour Archive

Posted: **Sun Mar 13, 2011 9:31 am**

I cannot find it in anyone's website.

I have one and works very well for me for my non Greek helmets, but I need another one and I cannot find even one from the usual vendors.

(pics from Known World Treasures)

I don't recall if it was from GDFB or Ukrainian....

KWT is my usual source, but they are out of stock.

Any ideas anyone?

Thanks!

Glaukos

Posted: **Sun Mar 13, 2011 9:50 am**

http://www.steel-mastery.com/index.php?&model=products_list&category_id=39&parent_id=17

Posted: **Sun Mar 13, 2011 10:21 am**

http://revival.us/linenhelmetliner.aspx

Posted: **Sun Mar 13, 2011 10:26 am**

I have one from KWT that I never used. I can sell it if you'd like.

Posted: **Sun Mar 13, 2011 11:52 am**

I've got one also that I'd sell, new.

Posted: **Sun Mar 13, 2011 6:50 pm**

I'd be very interested in one of these "never used that could be sold" ones if the original poster passes them up.

Posted: **Sun Mar 13, 2011 7:09 pm**

Ruaidhri wrote:I'd be very interested in one of these "never used that could be sold" ones if the original poster passes them up.

Same.

Posted: **Sun Mar 13, 2011 7:23 pm**

I offered mine to someone who sent me a PM for $25. If they don't take it, it's for sale to the first taker.

Posted: **Sun Mar 13, 2011 7:32 pm**

If he doesn't take it, just tell me where and how to pay. I've got my helm all drilled for a liner, just never made one.

Posted: **Sun Mar 13, 2011 8:46 pm**

Sorry Fellows.

Jestyr was kind enough to find one for me. The one offered by talaananthes I have no dibs on, so please contact him.

Thank you!

Glaukos

Posted: **Sun Mar 13, 2011 8:49 pm**

Sold.

Posted: **Mon Mar 14, 2011 4:46 am**

Still looking for one too.

Posted: **Mon Mar 14, 2011 5:20 am**

As am I.

Posted: **Mon Mar 14, 2011 6:58 am**

Wasn't Steel Mastery getting really bad reviews a while back? Delivery times or lack of product delivery, something along those lines?
I MAY be mistaken but for some reason that seems to ring a bell.

Posted: **Mon Mar 14, 2011 7:22 am**

We will be carrying them again this Pennsic. Because of my move to Germany, I have not restocked until we are totally settled in. We are not due to even get our household goods until the end of this month. That is also the reason our website has not been updated. Updating software is on my computer which is still due to arrive.

We are at Gulf Wars right now with limited stuff but still a decent selection. Will be at full stockage again at Pennsic. Regards, Ulrich

Posted: **Mon Mar 14, 2011 8:12 am**

UlrichvR wrote:We will be carrying them again this Pennsic. Because of my move to Germany, I have not restocked until we are totally settled in. We are not due to even get our household goods until the end of this month. That is also the reason our website has not been updated. Updating software is on my computer which is still due to arrive.

We are at Gulf Wars right now with limited stuff but still a decent selection. Will be at full stockage again at Pennsic. Regards, Ulrich

Uzzah!

Ulrich,

Will you be crossing the pond to come, or your friends on this side will man the booth?

Cheers!

Glaukos

Posted: **Mon Mar 14, 2011 8:16 am**

Glaukos, unfortunately I don't think I can make it this year. My buddy and partner Grimald/Robert will run the booth. I really would like to make it, but my anniversary is Aug 10 and it will be our 20th! Don't think it would go over to well being at Pennsic....priorties, you know

Catch you next my good friend! Ulrich

Posted: **Mon Mar 14, 2011 2:53 pm**

Steel mastery was getting bad reviews about custom items, but I have to say, I've never ordered one of these helmet liners without it showing up within two weeks. So....they're OK in my book (at least as far as the mass produced helmet liners go).

Posted: **Mon Mar 14, 2011 3:32 pm**

Conn Cullach wrote:Steel mastery was getting bad reviews about custom items, but I have to say, I've never ordered one of these helmet liners without it showing up within two weeks. So....they're OK in my book (at least as far as the mass produced helmet liners go).

Thanks, Conn, that's what I was hoping to hear.

Posted: **Tue Jun 07, 2011 9:34 am**

BUMP

Curious if anyone finally got a lead on one of these?

The Armour Archive

What happened to the premade helmet padding?

What happened to the premade helmet padding?

Re: What happened to the premade helmet padding?