Page 1 of 1
Butted Galvanized FULL sleeve Haubergeon
Posted: Wed Nov 16, 2011 5:43 pm
by Gurahl
Here is a haubergeon that I sadly misrepresented in a previous sale. It is indeed galvanized, but very clean and shiny throughout
37" from shoulder to bottom.
26" Sleeve from edge of neck opening to end of sleeve
24" Chest across as laying out.
I have a 42" chest and it fits me with plenty of room to spare. I will get new pictures up later tonight. Knowing the material it is I am asking 100 plus shipping.
Thank you for looking!
P.S. It is not riveted
P.S.S Apparently the sleeves are longer than I remember them being..
Re: Galvanized 3/4 sleeve Haubergeon
Posted: Wed Nov 16, 2011 6:22 pm
by Sigurd of Jorvik
Is this riveted?
Dibbs depending!
[edit -releasing dibbs]
Thanks for the update and good luck with the sale!
Re: Galvanized 3/4 sleeve Haubergeon
Posted: Wed Nov 16, 2011 6:43 pm
by Whiskey Jack
Dibs removed.
Re: Galvanized 3/4 sleeve Haubergeon
Posted: Wed Nov 16, 2011 6:47 pm
by Gurahl
I am sorry. No it is not. I will add that to the first post.
Re: Butted Galvanized FULL sleeve Haubergeon
Posted: Thu Nov 17, 2011 12:44 am
by Gurahl
Dibs have been relinquished by both individuals.
Re: Butted Galvanized FULL sleeve Haubergeon
Posted: Thu Nov 17, 2011 12:54 am
by EnderPC
Any Pics available?
Re: Butted Galvanized FULL sleeve Haubergeon
Posted: Thu Nov 17, 2011 12:21 pm
by Gurahl
http://farm7.static.flickr.com/6058/6255464231_470c1bb639.jpgThis is one I have available now. I am actually at a .50 cal range right now but will get more pics tonight.
Re: Butted Galvanized FULL sleeve Haubergeon
Posted: Thu Nov 17, 2011 2:03 pm
by Vishous265
I am Very intrested
Re: Butted Galvanized FULL sleeve Haubergeon
Posted: Thu Nov 17, 2011 4:10 pm
by Gurahl
I will try to get better pics up for you tonight.
Re: Butted Galvanized FULL sleeve Haubergeon
Posted: Thu Nov 17, 2011 11:16 pm
by Gurahl
http://www.flickr.com/photos/66936773@N06/Here are the promised pics. Sorry they are not that great, I had a busy night of Thanksgiving Pageants. Forgive the hideous creature modeling the maille.
From one pic...
"I stand 5'7" and have a 41.5" chest. It comes down to the tops my knees. For some one my size or smaller adding a split would make this a hauberk"
Re: Butted Galvanized FULL sleeve Haubergeon
Posted: Fri Nov 18, 2011 10:27 pm
by Gurahl
Bump for the fact that I will entertain trades. LOL Never thought to do that!
Re: Butted Galvanized FULL sleeve Haubergeon
Posted: Sun Nov 20, 2011 10:22 pm
by Gurahl
Bumparoo
Re: Butted Galvanized FULL sleeve Haubergeon
Posted: Mon Nov 21, 2011 10:37 pm
by Gurahl
Back to the top.
Re: Butted Galvanized FULL sleeve Haubergeon
Posted: Tue Nov 22, 2011 9:18 am
by Vikw2mnykids
It's galvanized so like a dummy I assume its somewhat light weight correct?
Re: Butted Galvanized FULL sleeve Haubergeon
Posted: Tue Nov 22, 2011 9:29 am
by Gurahl
It's roughly 20 lbs
Re: Butted Galvanized FULL sleeve Haubergeon
Posted: Tue Nov 22, 2011 4:05 pm
by kaolin
One of my shield sisters is looking for chain. I'll post it one our fighters e-list for her to look at.
Re: Butted Galvanized FULL sleeve Haubergeon
Posted: Tue Nov 22, 2011 4:47 pm
by Gurahl
This item has been traded.
Re: Butted Galvanized FULL sleeve Haubergeon
Posted: Tue Nov 22, 2011 6:31 pm
by PatternWeld
Trade has been shipped, check your PM's
Re: Butted Galvanized FULL sleeve Haubergeon
Posted: Tue Nov 29, 2011 12:15 am
by PatternWeld
I recieved the hauberk. Its as nice a butted hauberk as I've seen in a long time. Now to loose 20 more lbs so I can wear a gambeson or arming jacket under it....
Thank you for the trade
