6helms need homes

Patrick Thaden · Post by **Patrick Thaden** » Wed Oct 17, 2001 11:52 pm

I have a few helms on hand ready for sale. I can give you details on any of them. If you click under the folder For Sale it will show what I have available. http://photos.yahoo.com/patrick_thaden2001
Ok, yes, there are only five different ones shown...I forgot to take picts of the sixth one...It is just a basic SCA piecs, nothing special. I will take 150$ for it. I will try and get picts of it soon.
------------------
Patrick Thaden
Thaden Armory
http://www.thadenarmory.com

[This message has been edited by Armour Bob (edited 10-18-2001).]

Caleb · Post by **Caleb** » Thu Oct 18, 2001 12:17 am

i am interested on the specs on the bargrill close-helm, thanks!

Caleb
broknone AT yahoo.com

Ivar · Post by **Ivar** » Thu Oct 18, 2001 11:16 am

I'd like details on the barbute for a friend please...

Edric · Post by **Edric** » Thu Oct 18, 2001 1:05 pm

Bob, do you take commisions? If so, how much would you charge to make a Klappvisor for a bascinet I already have?

------------------
--Edric de Aldebury--
edric@edricsrose.com
http://www.edricsrose.com

Flos est puellarum, quam diligio, et rosa rosarum, quam sepe video.
"My love is a flower among virgins, and a rose among roses"

Patrick Thaden · Post by **Patrick Thaden** » Thu Oct 18, 2001 1:39 pm

Here are some specs on some of the helms. Caleb the close helm, height 12" a 24" head will just fit with 1/2" of padding so anything smaller would work well. Actual inside measurements are 9-1/4"frt-bck and 8"lft-rt has spring catches to keep the helm closed. 14gauge bowl and back. Ivar, The blued barbutte is 11" tall and will acomodate a 23" head with 1/2" of padding actual inside measurements are 8-5/8"frt-bck and 8"lft-rt, it is all 14gauge construction. Edric, I mostly do commision work. Send me some picts of what you have and what exactly you need and I will see what I can do for you.

------------------
Patrick Thaden
Thaden Armory
http://www.thadenarmory.com

Edric · Post by **Edric** » Thu Oct 18, 2001 6:49 pm

The bascinet is from anshelm. It is the top one on this page:

http://www.anshelmarms.com/bascinets.html

I believe it is a medium. I am wanting one similar to the one on the bascinet you have for sale, but with more of a point on the bottom as opposed to the rounded bottom the one in the picture has. I can send pictures with more detail if you like. I want to make one myself, but my lady wants one also so I thought I might make her's and buy mine. Just wanted to get an idea of how much it will set me back.

Armourkris · Post by **Armourkris** » Thu Oct 18, 2001 11:14 pm

COMPLETLY off topic here... but how did you get the pages nto that sketch book?
i've been thinking of doing osmething along those lines for a while and cant for the life of me think of a good way to hold the paper in place.
aside from that those are somep retty helms, if ony i wernt broke

------------------
What, drawn, and talk of peace! I hate the word, As I hate hell, all Montagues, and thee:

Patrick Thaden · Post by **Patrick Thaden** » Fri Oct 19, 2001 12:11 am

Edric, I tried to email you. Drop me a note and we can chat. Tybolt, I actually ran long thin rivets throught the stack if you look you should be able to see the 6 of them on the left, four are holding the hinges on as well.
patrick_thaden@hotmail.com

------------------
Patrick Thaden
Thaden Armory
http://www.thadenarmory.com

Patrick Thaden · Post by **Patrick Thaden** » Tue Oct 23, 2001 10:56 pm

well it looks like the bargrilled closehelm is gone any one want to purchase some of the others? http://photos.yahoo.com/patrick_thaden2001
under the for sale folder

------------------
Patrick Thaden
Thaden Armory
http://www.thadenarmory.com

olaf haraldson · Post by **olaf haraldson** » Thu Oct 25, 2001 4:08 pm

I have someone who may be interested in the Klapvisor... I'll get back to you.