Pitbull Garage Sale.....Shaped Demi Gauntlets

[Pitbull Armory]

Some simple stop ribs Ive been putting on BPs. These seem to work good with larger pauldrons because they are smaller.


They are 10 dollars if anyone wants one, 3 for shipping, they come with rivets and washers.


New PB Steel Bras, Better design, shaping, and quality. (I know this isnt the place to sell alot of these but I have some instock)


Paypal to leiderandy@yahoo.com if your interested.


Ty

Pb

[Pitbull Armory]

All stuff listed is still available

[Paladin74]

Just for giggles, how much for a steel bra, PB? That'd be a center piece for the Day of Wrong. lol

[Caius705]

Can you post a picture of the steel bra? My lady is interested in fighting and I was looking towards getting her gear; however, she is rather well endowed, so it may not be a perfect fit. Thank you.

[Pitbull Armory]

Hi Guys Im back from an emergency camping trip.....Pally the steel bra with beaded edges is 175, more if you want brass stuff on it.

Caius these are not normally for fighting but could be used for that I supose. The bras for sale are pictured above, If your woman needs a different size its no problem Ive made them from A - H cups......yes the H cups would fit on your head like a helmet. So no matter how big the breasteses....I got you covered (pun intended)


Varukh and one other persons patterns shipped out today.


TY

Pb

[Caius705]

Talked to her, says she'd prefer hardened leather over steel for fighting. South Texas, steel=heat stroke. Thank you though. DD if you were wondering.

[Pitbull Armory]

Hi Caius, No problem ty for your interest.

I have 2 C belts shipping out tomorrow.


Ty

PB

[Alwin de SOSS]

any splinted leggings? Thats the last piece of armor I really need to complete my kit.

[Pitbull Armory]

Hi Langly, I have a set of knees I have been going to make into a set of splinted legs. I can finish them for you if your interested. I wont know a final price on em till they are done but I promise it will be reasonable. Ill get them finished up and see if you like them, they will be L to XL size.


Ty

Pb

[Pitbull Armory]

Hi guys, Ive been getting pretty quick at shaping the globose breastplates out, I have one instock shown below in a small size I can ship instantly, Fits around a 32-34 inch waist. I can have one made for you within a week if anyone is interested in a different size, The Globose with Superior 14 oz strapping, and Simple Stoprib shown in the pics for $275. Other options are availabe just PM me about them if your interested.

BKay your C belt shipped today, and one shipped to Canada to Staniewski.

Thank you

Pitbull

[Pitbull Armory]

Heres a closeup of the simple stoprib. $12

Did anyone need a belt mounted drink holder? $15

Shipping is 3 dollars for stopribs or drink holder

Anyone need a Merc Tailor Falling Bevor? $125 Shipping $12


Paypal to leiderandy@yahoo.com if your interested in anything.


Thank you

Pitbull

[Pitbull Armory]

Bevor

[Baron Ector]

ok PB How much for one of those amazing C belt that everyone loves and what would be the shipping to 72472 Prefer it in either an Ox Blood color or no color at all and i can dye it myself.

Ector

[seanjohnson1]

what is weight and thickness of the hardened heaters? are we talking T7 7075? I love that stuff in a thin width...'

and what is special about the heater in the pics?

i see a marker on it...but just curious

thanks Sean

[Pitbull Armory]

Hi Baron Ector, thank you for your interest. I sell the C belts to AA Members for $80 up to a 45 inch waist, Add 10 dollars for anything over that. Shipping is 12 dollars. Paypal to leiderandy@yahoo.com if your interested.

Thank you

Andy @ PBA

[Pitbull Armory]

14th C Legs and Arms, I have a set of these legs and arms almost finished from a dropped order in a lg to xl size. I can finish them up if anyone is interested in a set. I can still make them to the buyers specs if your not huge or really small.

As usual all my items have a 100% satisfaction guarantee on them. If you don't like something, Ill fix it, If I cant fix it, Ill exchange it, If you don't want an exchange, Ill refund you. Its as simple as that. I try to treat my customers like I would want to be treated, Like my freinds. Just buy any of my items and ill prove it.



Legs are $600, Shipping is $25

Arms are $400 Shipping is $20

Have a good weekend


Pb

[Pitbull Armory]

Moar

[Pitbull Armory]

These are the same Arms with Spaulders, I can do the spaulders fast for $150, so for the Shaped
Arms and Spaulders, it would be $550

Ty
PB

[Antonio]

What sorta price would you be looking for on the peasecod (breast and back)?

[Pitbull Armory]

Hi Seanjohnson, Thanks for your interest. I have no idea about the scientific hardness on the shield. Its made out of sign aluminum, The signs vary in temper alot, I only use the really springy, tuff to cut ones for shields, I use the softer ones for fantasy armor. If I recal they weigh 4-5 lbs, The marker on the shield is just an emblem I put on there to cover up a large hole that was in that part of the sign since I cant weld aluminum.

Antonio thank you for your interest, a finished peascod and backplate without tassets would be $450. If you wanted Tassets it would be $525.


Have a good weekend guys

Pitbull

[Antonio]

Too rich for my blood, I'm afraid, at the moment!

[FrauHirsch1]

Still have the finger guants? if so, Picture/Price?

[seanjohnson1]

Ty for your information Pitbull!

[Pitbull Armory]

No prob guys ty for interest.

Heres some pics Frau, To an AA member Id sell these for 375 and 15 for shipping, They fit a Med to L hand, Paypal to leiderandy@yahoo.com if your interested.


Have a good weekend

PB

[Pitbull Armory]

All items still available, I will entertain offers and even partial trades to help make the deals happen.


I can make one of my Pitbull War Belts in to a Battle Skirt like shown below if anyone is interested, $250 if anyone wants one. These are made from 14 oz 1/4 inch thick Saddle skirting chrome tanned leather.


Need Pitbull Plastic Mitten and Hidden Body Armory Patterns? Please look here for pics and info on them - viewtopic.php?f=3&t=138250&hilit=+pitbu ... r+patterns


Have a good week

Pitbull

[Michael Cartwright]

14th C Legs and Arms, I have a set of these legs and arms almost finished from a dropped order in a lg to xl size. I can finish them up if anyone is interested in a set. I can still make them to the buyers specs if your not huge or really small.

As usual all my items have a 100% satisfaction guarantee on them. If you don't like something, Ill fix it, If I cant fix it, Ill exchange it, If you don't want an exchange, Ill refund you. Its as simple as that. I try to treat my customers like I would want to be treated, Like my freinds. Just buy any of my items and ill prove it.



Legs are $600, Shipping is $25

Arms are $400 Shipping is $20

Have a good weekend


Pb

I have a set of Andy's arms and legs are the are extremely well made with beautiful lines and these photos really do not do them even the slightest justice (Seriously Andy get a better camera) and $600 is a steal....

And that warranty is rock solid too.

Just saying.

[Pitbull Armory]

Hi Michael, Rofl yes I do agree, I will get my other camera for pics from now on these suck. Thanks for the good words on my stuff I appreciate it. Do you have any pics of yourself in my armor?

All Items still available on this thread


Have a good weekend

Andy @ Pba

[Seamus mac Dhughaill]

Do you work in stainless or only mild?

living in Florida, mild just isn't feasible.

[Michael Cartwright]

542954_10150846991991171_528877268_n-1 (360x640) (169x300).jpg (77.67 KiB) Viewed 117 times

Do you have any pics of yourself in my armor?

Maybe....

[LDWalter12]

I could use a set of shoulders to go with the arms and legs I bought a while ago. What is your time frame on that?

[Pitbull Armory]

Hi Guys,

Seamus im sorry I dont work in stainless, my old hands are toast from working mild steel already, They feel like the got run over by a truck. I live in Washington state where it is VERY moist so I understand why you want stainless.

Nice Michael thank you for posting! Nice kit there.


LDW I was going through my half done shelf yesterday and found a set of large cops for a set of my large Pauldrons mostly finished I could have ready for you within 2 weeks if your interested.


Have a good weekend guys

Pb

[LDWalter12]

I have a set of your big pauldrons. What I need for a 14C show is spaulders. Still for a big guy, but not with haute guards or the full coverage. Like the ones you posted pics of with the arms on 8/24.

Doable?

Dale

[Talan Diofal]

How much are the shield bosses

[Adrian of Rimsholt]

PM waiting for you

[seanjohnson1]

Shoundn't there be a large black man in that outfit....killing Conan's father... and asking about steel swords....?