The Armour Archive

Hi, I need a little cash in my paypal account so I can pay for some other stuff. Anyone need any....

Knee or elbow cops or joints
Shield boss
C Belt
Pourpoint tabs
Hidden Armor Patterns - (view pics and info on patterns here viewtopic.php?f=3&t=138250&hilit=+pitbu ... r+patterns

16th C Finger gaunts
Steel Bra
Pitbull War Belt
Heater Shield
Stop Ribs
Simple Stop Ribs
Grounding Finger Shields
Peascod BP
Globose Breastplate
Pitbull Battle Skirt
Spuirrel Armor?

These are items I have instock or can get in the mail the next day so you get them fast.


No problem if not, I just thought Id ask. Let me know if I can be of any service.

Take care

Pb

Just out of curiousity... I have a friend who is REALLY into squirrels, its her device actually. What would you want for the squirrel armour and the taxidermied lil guy?

Do you have a stop-rib in stock, and does it have the same hammer marks on the terminals as the sample on your site? If you can grind those smooth, I'll take one. My new globose is feeling naked.

Klaus

Hi Pw, I cant sell my squirrel im sorry, I put squirrel armor up there for a giggle.

Klaus, Ooo yes, I forgot stopribs, I can make you one up tomorrow if you like, I need to make one for Al too. I can take the hammer marks out of the ends no problem.


Ty

Andy

Excellent- should I order through the site or PayPal you directly?

Are you still doing the 14th century Milanese Mitten Gauntlets? I know you went to an instock basis, but I've not seen any of those for sale for a long time.

Thanks
Brucer

Hi Klaus, either way is fine Ill get one going for you here in a few mins when I go out to the shop.

Hi Brucer, I am experimenting with the Milanese Mittens right now on an order. But another set would take me too long to make at this time, as I still have some loose ends to tie up.




Thank you

Pb

Payment sent via site, thanks!

Thank you Klaus, I just finished your Stoprib, Ill ship it out later today for you priority mail, thanks for the business. Heres 2 stopribs, one for you and one for Al. Yours shows a regular washer in the center, Ill send a floral one for you though instead.


Let me know if I can be of any service.

Pitbull

Anyone interested in this Peascod Breastplate I have half done? I can finish it up to your specs. Should fit 40-45 inch waists Ill check for sure if needed. PM me if you want it, or bump this thread with questions.

Ty

PB

Got any portable holes stashed away? I need one to hold a 1 1/4" banner pole.

Is that knife & pricker, your make or someone else's ? If so, who please?

What is the wood & what kind of steel?

Dat's purty. Good price. Got 2 sets already.

I am tempted by the war belt with the lion. What would be your asking price? Also what is the size on it? Thanks!

Pitbull - 3 things.

1) I have a brand new, never worn C-Belt I got in a deal some time ago. It is a beautiful piece of work and I truly look forward to hanging my legs from it. Sadly, my dimensions exceed the belt dimensions by about 4 inches - Damn that Desk Work! How much would a new slightly longer back piece be for a C-Belt? I could do one myself, but I'd rather have it done by the maker than have me splice in some piece of scrap I have laying around. Deciding whether to keep or sell the belt to somebody more svelte than myself, so let me know.

2) How much for the grounding finger bucklers?


3) How much do you charge for the Stop-ribs? (Don't have the breastplate yet, but I will eventually)

Thanks
Brucer

Hi Andy,

I'll take the feast knife and pricker(pending shiping cost) would you check the shipping to Australia 6163 please?

Cheers

I'm also interested in the grounding finger bucklers if they are still available or if you have time to make some more.

Thanks
Adrian

I'm also potentially interested in the lion war belt, price and sizing info?

Hi guys.

Alan im sorry I dont, I have some bed rails I can make a really heavy duty hole out of if you want.

Pw Im not sure, I got the knife set from Cian of Storvic, He may have the info you wanted .

Kielreid The belt I have now is only about half done so I can make it to your measurement, I want 150 for the belts and 12 shipping.

Brucer no problem, If you tell me the width of the strip you need Ill send it to you with some rivets for five dollars.
A set of grounding finger bucklers are 50 and 10 for shipping
Stopribs have been going good at 25

Michael I think shipping to AU would be about 12 dollars

Sathaeian pls see above.


Paypal to leiderandy@yahoo.com for payments please.


Thank you

Pb

Payment sent. (:

Looks like I will just have to make myself a set... lesson learned... don't ask questions, call dibs then ask questions

Guess I will have to weld up a stake to tease you with next weekend hehehe!

PatternWeld wrote:Looks like I will just have to make myself a set... lesson learned... don't ask questions, call dibs then ask questions

Guess I will have to weld up a stake to tease you with next weekend hehehe!

Hey Pattarnweld, I'm really sorry about that, if you want them I'll release my "dibs" and just get Andy to cancel the PayPal, no problem at all.

Michael,

no worries. I can spend an afternoon at the shop and make my own. I've got some ATS-34 stainless sitting around with nothing to do then I won't have to worry about rust. Pitbull needs $ not complications. I apologize for grousing in public.

Grimr

PatternWeld wrote:Michael,

no worries. I can spend an afternoon at the shop and make my own. I've got some ATS-34 stainless sitting around with nothing to do then I won't have to worry about rust. Pitbull needs $ not complications. I apologize for grousing in public.

Grimr

Hey Grimr,

No apologies needed, i feel like i just pushed my way into a line and had you apologise for it, let me save you an afternoon. pm me your address and i'll get Andy to ship the set to you with my compliments, its the least i can do for being so rude.

You win, Andy wins and honor is satisfied.

Michael,

I am overwhelmed by the chivalry & courtesy of your offer but I cannot accept.

Grimr

Ye Gods, you're gonna make me blush!

No problem, I understand but I had to offer....

Michael D your Knife shipped today, USPS Mail customs number is LC486324157US, Thank you.

Klaus your stoprib shipped USPS Tracking number is 03112550000369178218. Thank you.

AL your Stoprib shipped today USPS Tracking number is 03120090000030760795, Thank you


All stuff listed is still available, Peascod BP added, Pics and info above.


COMING SOON, Pitbull Splinted Legs


Have a good week

Pitbull

Thanks Pitbull and sorry for hijacking your thread....

hey I know a couple of people who may be interested in your Peascod, I am unable to get the "body" section of your website to resolve, so I have to ask, how much are you asking for it?

Hi, Michael No worries M8 that wasnt Hi Jacking anyway, Thanks for keeping me at the top of the page

Baron Gaston, I havent been able to get enough time to fix my webisite still, I dont have a price on this set at this time anyway because its not done. Final price depends on details, Did you want it as is? Did you want the edges rolled? Did you want Faulds? Tassets? Stoprib etc. Let me know and Ill get back to you fast.


ty

Pb

Pitbull Armory wrote: Baron Gaston, I havent been able to get enough time to fix my webisite still, I dont have a price on this set at this time anyway because its not done. Final price depends on details, Did you want it as is? Did you want the edges rolled? Did you want Faulds? Tassets? Stoprib etc. Let me know and Ill get back to you fast.


ty

Pb

Anyone with money can buy what they want... But a peascod (that one seems to have reasonable shape, actually) needs rolls at the arms and neck. Or a roll at the neck and gussets. And please, no stop rib. Not for late 16th c. Recessed border? Sure? Embossed volutes? Sure. No stop rib though.

Anyway, back to real customers.

Wade

No probs dude...

*Bump!*

I will be sending the $ and measurements for the belt piece and possibly the Stop Rib later tonight/tomorrow.

Thanks
Brucer

size and price on the 14C BP?

wcallen wrote:

Pitbull Armory wrote: Baron Gaston, I havent been able to get enough time to fix my webisite still, I dont have a price on this set at this time anyway because its not done. Final price depends on details, Did you want it as is? Did you want the edges rolled? Did you want Faulds? Tassets? Stoprib etc. Let me know and Ill get back to you fast.


ty

Pb

Anyone with money can buy what they want... But a peascod (that one seems to have reasonable shape, actually) needs rolls at the arms and neck. Or a roll at the neck and gussets. And please, no stop rib. Not for late 16th c. Recessed border? Sure? Embossed volutes? Sure. No stop rib though.

Anyway, back to real customers.

Wade

Hehe,..... Yeeesss Maaaster...No Stopribs I promise...Can you show my what an Embossed Volute is if you get time?

I agree and would never sell a BP without rolls, this one is unfinished, I just wanted to point out that price really depends on the details and condition its sold. As is price, is different than finished price, I was just asking what condition he wanted it in before I put it in a box.


TY

Andy @ PBA