Page 1 of 1
NOT NEEDED HELM WAS MAILED.
Posted: Fri Jan 04, 2013 11:19 pm
by MJBlazek
I bought a helmet from Metal Masher here from the AA.
It was a pretty basic helmet. Cost me $80. He never sent it to me. told me he had a tracking number, but never gave it. I haven't heard from him in a month.
This helmet was supposed to be a Christmas present to an SCA friend, whose husband has decided to fight along side her.
I am trying to get my money back through PayPal but don't have it yet.
Does anybody have a cheap helmet to fit a 25 inch head and glasses they might be willing to part with.
Perhaps on good faith until I get the money back through pay pal.
I would be willing go make a down payment on it.
A couple of people through PM have told me they have had bad experiences with Metal Masher.
Re: Need a really cheap newbie helmet... have been ripped of
Posted: Sat Jan 05, 2013 2:11 am
by Atlanta Armory
Try hjalmir (I think that's right). He specializes in cheap, tough helms. I used to have one of his for a starter helm.
-Ben
Re: Need a really cheap newbie helmet... have been ripped of
Posted: Sat Jan 05, 2013 2:40 am
by bigfredb
+1 on hjalmr
Re: Need a really cheap newbie helmet... have been ripped of
Posted: Sat Jan 05, 2013 2:51 am
by Atlanta Armory
Forgot to mention... I only paid $80 for my helm.
Re: Need a really cheap newbie helmet... have been ripped of
Posted: Sat Jan 05, 2013 9:36 am
by hjalmr
Unfortunately I don't have that size in stock and I am still too busy trying to catch up on orders to help.
But thanks to those who recommended me.
(I wish I could get caught up so I could help people in this situation)
X_X
Re: Need a really cheap newbie helmet... have been ripped of
Posted: Sat Jan 05, 2013 9:41 am
by Caius705
I'm sorry. I have a bargrill bascinet I'd sell you but it barely fits a 23.5 inch head. Wouldn't even come close. Good luck though.
Re: Need a really cheap newbie helmet... have been ripped of
Posted: Sat Jan 05, 2013 11:27 am
by Nathan Hartman
Man, that's no good... I do have a helm of that size that I'd be willing to sell you. It's one of Iron Monger's munition bascinets that's served me faithfully for the last ten years. But after shipping from Alaska to Maine I suspect it'd end up being cheaper to buy a new one directly from Eric... :-/
Re: Need a really cheap newbie helmet... have been ripped of
Posted: Sat Jan 05, 2013 11:42 am
by chaosclyve
I may one that will work, but I am not back at my house until Sunday night. I can let you know then if you have not found one.
Re: Need a really cheap newbie helmet... have been ripped of
Posted: Sat Jan 05, 2013 1:16 pm
by Ceawlin Alreding
Matt, check your PM's. I think I have a stop gap solution.
Re: Need a really cheap newbie helmet... have been ripped of
Posted: Sat Jan 05, 2013 2:40 pm
by Atlanta Armory
Rahl Schumann wrote:Man, that's no good... I do have a helm of that size that I'd be willing to sell you. It's one of Iron Monger's munition bascinets that's served me faithfully for the last ten years. But after shipping from Alaska to Maine I suspect it'd end up being cheaper to buy a new one directly from Eric... :-/
Check to see if it fits in a large flat rate box from USPS. If so it's only about $15 to ship anywhere in the US.
-Ben
Re: Need a really cheap newbie helmet... have been ripped of
Posted: Sat Jan 05, 2013 2:52 pm
by Pitbull Armory
Hi Mj,Im sorry to hear about this, I just had my first bad transaction here on the aa where I bought a pugio and the guy gave me the run around and refused to send me any tracking info, He didnt send the knife to me but he did refund me at least.
Enough about me though, Let me know if you find a helm or not, I can throw together a barrel helm or somthing if you need one.
Take care
Pitbull
Re: Need a really cheap newbie helmet... have been ripped of
Posted: Sat Jan 05, 2013 2:53 pm
by Otto
That size of helm would never fit in a flat rate box.
I use them all the time and WISH I could fit helms in them!
Re: Need a really cheap newbie helmet... have been ripped of
Posted: Sat Jan 05, 2013 3:20 pm
by Nathan Hartman
Otto wrote:That size of helm would never fit in a flat rate box.
I use them all the time and WISH I could fit helms in them!
Very true. I can only wish...
Re: Need a really cheap newbie helmet... have been ripped of
Posted: Sat Jan 05, 2013 3:27 pm
by accdntprone
I have a huge ugly greathelm that might serve. Its not really finished, its welded togeather but I usually also rivet them. Let me know if you dont find something else.
Re: Need a really cheap newbie helmet... have been ripped of
Posted: Sun Jan 06, 2013 1:40 pm
by MJBlazek
Thanks for all the response guys!
I have heard back from the seller. And he states he will either have it straightened out, or refunded by Tuesday. If I don't have an answer of the money by tuesday I will contact everyone on here who has contacted me.
MJ
Re: Need a really cheap newbie helmet... have been ripped of
Posted: Wed Jan 09, 2013 1:37 pm
by MJBlazek
So It is now Wednesday.
No money in my Paypal account, and no Tracking number for a helmet.
Luckily if they do not respond to Paypal by next week I get my money back.
I am going to start emailing people later tonight.
Re: Need a really cheap newbie helmet... have been ripped of
Posted: Fri Jan 11, 2013 3:04 pm
by Tegan
If none of your other offers work out let me know, I probably have something I can lend and might have one to part with. It's amazing how much stuff I accumulate.
Will you be at Birka? Good location for an exchange...
Re: Need a really cheap newbie helmet... have been ripped of
Posted: Fri Jan 11, 2013 6:13 pm
by MJBlazek
Well folks. Thank you all for your help.
I got a tracking number, and the helmet shoudl be here on Monday.
Re: Need a really cheap newbie helmet... have been ripped of
Posted: Fri Jan 11, 2013 8:15 pm
by Paladin74
Pitbull Armory wrote:
Enough about me though, Let me know if you find a helm or not, I can throw together a barrel helm or somthing if you need one.
Take care
Pitbull
I would take him up on his offer, MJ.
Re: Need a really cheap newbie helmet... have been ripped of
Posted: Sun Jan 13, 2013 1:04 pm
by johnion
If you haven't found anything yet, I wholeheartedly endorse Emorokian Arms. Beau's helms are reasonably priced and solid as all get out. The helms look better than pictured on his website.
Hope that helps.
John
Re: Need a really cheap newbie helmet... have been ripped of
Posted: Sun Jan 13, 2013 8:10 pm
by Vermillion
Pit bull,
I remember when you showed up on the archive. I always thought you were a earnest person who stood by his word. But you have truly proved over time that you are one of the Good & Honorable People in this world. Always willing to help. Rare even here.
*SALUTE*
Re: Need a really cheap newbie helmet... have been ripped of
Posted: Mon Jan 14, 2013 12:19 am
by metalmasher
MJ i am sorry this is the first i have seen of this post i am sorry i had missed it. Have you not still gotten the helm. i post i was looking into it on Sunday the 5th. but being Sunday i would get on it first thing Monday morning. at witch time i got problem fixed and the item was back in mail to you on wed the 9th tracking number was sent to you at that time.
i am going to take the blame on me i dropped the ball and did not fallow up on this and now have to deal with this.
as of tonight Sunday the 14th is the first posting of this. i publicly say i dropped the ball on this and am sorry.
please contact me if you still have not gotten the item
Re: Need a really cheap newbie helmet... have been ripped of
Posted: Mon Jan 14, 2013 6:31 am
by MJBlazek
No No no... I said you sent it! There is a post!
People don't actually read things!
Re: NOT NEEDED HELM WAS MAILED.
Posted: Mon Jan 14, 2013 11:01 am
by losthelm
Those tracking numbers work well most of the time.
I had a package bouncing around for a while due to a typo in the zip code.
Zip code and town where in conflict and it bounces from one sort facility to another.
USPS finally got the package back to me though it took about a month for priority.