FS Merctailor Gorget
Posted: Thu Sep 05, 2013 1:49 pm
I have for sale one of the multilame gorgets we used to make.
The gorget is one of the 15/16th century gorgets we used to make. Made from 16 gauge CR mild steel with beveled plate edges and rolled edges where appropriate. Closes with a keyslot rivet and pin closures on either side of the top neck lame. Will fit up to an 18 inch neck with room for the collar of an arming garment or 19 without. I'm thouroughly average at 5 foot 10 inches, 180-185 pounds, not particulally large just average and this fits me fine. Like to get $180 ( less than we used to get for these ) plus the cost of shipping.
If desired I can install straps for the attachement of shoulder harness that will work with any of these spaulders viewtopic.php?f=3&t=165006 or other shoulder defense free of charge.
Feel free to ask questions. Paypal, check or MO are fine. I can do these in other neck sizes if there's interest.
The gorget is one of the 15/16th century gorgets we used to make. Made from 16 gauge CR mild steel with beveled plate edges and rolled edges where appropriate. Closes with a keyslot rivet and pin closures on either side of the top neck lame. Will fit up to an 18 inch neck with room for the collar of an arming garment or 19 without. I'm thouroughly average at 5 foot 10 inches, 180-185 pounds, not particulally large just average and this fits me fine. Like to get $180 ( less than we used to get for these ) plus the cost of shipping.
If desired I can install straps for the attachement of shoulder harness that will work with any of these spaulders viewtopic.php?f=3&t=165006 or other shoulder defense free of charge.
Feel free to ask questions. Paypal, check or MO are fine. I can do these in other neck sizes if there's interest.