The Armour Archive

I picked this up a few years ago from Bokalo - it's very nice but I ended up taking my kit in a different direction, so I never completed the kit. Made of aluminum with all the required holes punched. Just add a fabric/leather cover and straps!

I'm 5' 10" and the kit could fit someone slightly taller or shorter. It would fit a person who wears a mens medium shirt with the least amount of modification.

Detailed measurements:
For a single front "lung plate":
From top to bottom, at central closure - 13.5"
From top to bottom, longest distance -15.5"
Side to side, at bottom edge - 10"

For the back plate:
From top to bottom, along the center - 12.5"
Side to side, at bottom edge - 21.75"

All of the required plates are provided, I just only took pictures of the front, back, and one quarter of the fauld. Additional photos and measurements available upon request.

I'd like to get $250 plus shipping.







Just to head off any concerns, yes, I've offered this for sale on the Archive in the past, but the offer I accepted never materialized.

Thanks for looking,
Adam

the sale failing was all my fault , sorry Adam
was a ruff summer

Sweet!

Instructions for assembly?

I'm 5' 10" and about 190 lbs, wear a 43 regular jacket. Think it would fit?

leekellerking wrote:Instructions for assembly?

I'm 5' 10" and about 190 lbs, wear a 43 regular jacket. Think it would fit?

I'm pretty sure that I have the original instructions from the armorer around somewhere - if not, I'd be happy to provide technical support. I'm also pretty confident that I have the patterns for the cloth portions available.

I think it should work - could you send me your measurements across your waist (bellybutton level) and across your chest to confirm?

Adam

This is a good deal for a kit that just requires a little bit of work (sewing and riveting).

Make me an offer.

Adam

Tentative dibs

PM sent.

Adam

Put me next in line if the sale falls through.