Page 1 of 1
WTB- Inexpensive Bacinet- 12 G- no grill
Posted: Fri Nov 01, 2013 3:11 pm
by MJBlazek
Anybody have an old back point bascinet they would like to get rid of. Inexpensive is better.
Doesn't need a grill, would like it to be 12g though.
Any condition is fine as long as the shape is good.
To fit a 23 1/5 inch head.
Re: WTB- Inexpensive Bacinet- 12 G- no grill
Posted: Fri Nov 01, 2013 3:48 pm
by accdntprone
If you wanted to get a set of halves from rough from the hammer I would be happy to weld / dress them out for you. That would likely be your cheapest route unless someone speaks up with a used hat.
Re: WTB- Inexpensive Bacinet- 12 G- no grill
Posted: Fri Nov 01, 2013 4:13 pm
by MJBlazek
I will keep that in mind, thanks! Lets see if anything pops up over the weekend.
Re: WTB- Inexpensive Bacinet- 12 G- no grill
Posted: Fri Nov 01, 2013 4:50 pm
by Klaus the Red
Matt, check out this one- no gauge listed, but you can ask. Odds are it's 12 if it's a recent piece.
http://www.ebay.com/itm/171162737285?ss ... 1436.l2649
Re: WTB- Inexpensive Bacinet- 12 G- no grill
Posted: Fri Nov 01, 2013 8:08 pm
by MJBlazek
It's 14, and I put a couple of bids on it. I automatically got out bid. I hate the auto bid system, and that you ncang see what the highest entered bid is. I refuse to bid against machines. I remembered why I disliked eBay so much.
