FS Various Leather Pouches

For trading/Selling/and posting items that you need very badly.
Post Reply
O'Tearney
Archive Member
Posts: 285
Joined: Tue Mar 01, 2011 4:46 pm
Location: Anniston, Alabama

FS Various Leather Pouches

Post by O'Tearney »

The weather down here has been cold....granted, not as cold as it has been in some areas of the States, but cold enough to keep me out of my unheated Shop. So, I did a few pouches to pass the time until the weather warms up.

All except the last one are made from 5-7 oz leather, coloured with either black or brown shoe polish (I find the wax in the polish makes for a prettier-looking finish). All are hand-stitched with waxed linen cord, and have various-sized buckles (except for the round upright one).
I'll post three photos of each in their own 'response' to this post with any other details, including dimensions, and price.

If you have any questions, please let me know.

I prefer Paypal, but will entertain any other methods of payment.
I also prefer to ship only in the CONUS.

Thanks for looking!
User avatar
StephanKSCA
Archive Member
Posts: 96
Joined: Thu Aug 08, 2013 11:13 pm
Location: Shire of Fynnon Gath (San Marcos, TX)

Re: FS Various Leather Pouches

Post by StephanKSCA »

Link?
May God keep and bless you!

Sir Stephan
Second Duke of Bellatrix
O'Tearney
Archive Member
Posts: 285
Joined: Tue Mar 01, 2011 4:46 pm
Location: Anniston, Alabama

Re: FS Various Leather Pouches

Post by O'Tearney »

The first pouch is @ 6.5" across at the top and @ 7.5" across at the bottom. Height is 5.75", depth tapers from .75" at the opening to 1.5" at the bottom. There is a single belt loop on the back that will fit a 1.5" belt.
The finish on this one is the black shoe polish, which gives it a darkish-brown look. The inside of the flap has been dyed black. The rest of the interior has been left undyed.

I am asking $25 for this one, including shipping to the CONUS.
Attachments
p1a.JPG
(89.32 KiB) Not downloaded yet
p1b.JPG
(89.03 KiB) Not downloaded yet
p1c.JPG
(91.75 KiB) Not downloaded yet
O'Tearney
Archive Member
Posts: 285
Joined: Tue Mar 01, 2011 4:46 pm
Location: Anniston, Alabama

Re: FS Various Leather Pouches

Post by O'Tearney »

This pouch has a teardrop-shaped profile. The width and height of this one is 6". The taper is from 1" at the opening to @ 3.5" at the widest. There are two belt loops that will fit a belt a little over 2" wide.
This one has also been dyed with the black shoe polish, and the interior has been left undyed.

I am asking $25 for this one, including shipping.
Attachments
p2a.JPG
(92.76 KiB) Not downloaded yet
p2b.JPG
p2b.JPG (84.31 KiB) Viewed 4 times
p2c.JPG
(88.1 KiB) Not downloaded yet
O'Tearney
Archive Member
Posts: 285
Joined: Tue Mar 01, 2011 4:46 pm
Location: Anniston, Alabama

Re: FS Various Leather Pouches

Post by O'Tearney »

This pouch is 3.5" wide, 4.75" high, and 1.25" deep. It actually resembles a cartridge pouch, come to think of it....
This one has been dyed with the brown shoe polish, and the interior has been left undyed. There is a single belt loop that will fit a belt a bit over 2" wide.

I am asking $15 for this one, including shipping to the CONUS.
Attachments
p3a.JPG
(85.95 KiB) Not downloaded yet
p3b.JPG
p3b.JPG (89.29 KiB) Viewed 4 times
p3c.JPG
(87.42 KiB) Not downloaded yet
O'Tearney
Archive Member
Posts: 285
Joined: Tue Mar 01, 2011 4:46 pm
Location: Anniston, Alabama

Re: FS Various Leather Pouches

Post by O'Tearney »

This is sort of an odd one....
This is a round pouch with a diameter of about 5" and a width of 8". The opening is 6.5" by 3". It has been dyed with the brown shoe polish, and the interior has been left undyed. The leading edge of the flap and the leading edge of the interior have been reinforced with another strip of leather to give it a bit more rigidity.
There is a ring on each end of the pouch that can be used in various ways to hang the pouch.

I am asking $30 for this one, including shipping to the CONUS.
Attachments
p4a.JPG
(90.94 KiB) Not downloaded yet
p4b.JPG
(94.41 KiB) Not downloaded yet
p4c.JPG
(90.17 KiB) Not downloaded yet
O'Tearney
Archive Member
Posts: 285
Joined: Tue Mar 01, 2011 4:46 pm
Location: Anniston, Alabama

Re: FS Various Leather Pouches

Post by O'Tearney »

This one is another round pouch. Diameter is 3", height is 9.25". The 'cap' closure is held on by a leather thong, and is 2.5" tall.
This has also been dyed with the brown shoe polish, and the interior has been left undyed.
There is a single D-ring for hanging, and a bit of line-carving overall.

I am asking $25 for this one, including shipping to the CONUS.
Attachments
p5a.JPG
(86.92 KiB) Not downloaded yet
p5b.JPG
(91.12 KiB) Not downloaded yet
p5c.JPG
(97.3 KiB) Not downloaded yet
O'Tearney
Archive Member
Posts: 285
Joined: Tue Mar 01, 2011 4:46 pm
Location: Anniston, Alabama

Re: FS Various Leather Pouches

Post by O'Tearney »

The last pouch is made from black upholstery-thickness leather (@2-5 oz). It is @ 6.25" across at the top, and @ 7.25" at the widest point. The side taper is from .5" down to 1". I reinforced the flap and the interior opening using the "rough" side of the same type of leather. There are two belt loops that will fit a belt up to 2.5".

I am asking $20 for this one, including shipping to the CONUS.
Attachments
p6a.JPG
(94.89 KiB) Not downloaded yet
p6b.JPG
(97.67 KiB) Not downloaded yet
p6c.JPG
(89.44 KiB) Not downloaded yet
Post Reply