The Armour Archive

Doing some spring cleaning to offset Spring Broke (hopefully) in time for Spring Break.
Since I am BROKE and on a schedule.. we are going to try and slipstream the auction process. I am going to run pix of everything I have for sale or auction and those Items, people tell me they are interested in, WILL go up for auction in their own Thread. Stuff I have already tried to sell will be shown at the bottom (to give me time to find the pix) or noted as to its location on my web page.

Opinions and querys MORE Than welcome.
The Pig face is 16Ga SS Raised eye slots and mouth are started. Made to fit a med Basc (of my pattern)

The vambs and greaves are oak tanned 12-15 OZ and the greaves will be dyed to match. fit a med Muscled individ. can be cut down to go with the Macedonian Lamallar shown further down

PIGGY FACEPLATE?

Helms, Zunari Kubota:
Mini SS (Just what you see) 8" X 6 3/4"
Med-L SS (W/ SCA skirt) 7 1/4" X 9 1/2"
Med MS (as shown) 7 1/4" X6 7/8"

Med-L SS was part of a full Harness I am working on. IT WILL ONLY be sold as a finished product.
Everything else is "As Is" or "As Finished"... Which leaves some Custom options open for those pieces being bought Completed.

I shoulda Known Randy....

One note: you can either note your interest and wait for an auction or make an offer and (Maybe) beat everyone to it.

The one in the back is a Main Guache gaurd for Rapier (Heavy{C&T) or Light). The two BIG ones are Ma-Dhu grip baskets. I have more Solid baskets and a couple other styles of Rod sword basket. I just have to find them.
Note: ALL of these Baskets pass the "Shall not allow a 1" rod to pass thru" SCA helm standard. IE legal in every kingdom in the Emperium.

Interested in the pig visor.

Size? Material? Gauge? Picture from the front please?

Yes, more information on the pig face please.

Plz See above (Initial Post) for basic Pigface info

The Macedonian Lamallar is made for a petite person or a thin person who has an incredibly high waist. As far as a set for a petite fighter I also have my leather artic gaunts (In AA Aluminum) in SMALL ready to assemble.

I have 3 Large Brig Gorgets Avail and one XL L=19 Cir 2 Front Ht. XL= 21 cir 2 Front Ht

As before
Large number of Various Shields.... Including the gothic one.
Only the Middle Bascinet is avail. the others have sold.

And of course their is our ever dangerous Xbows.... 2 of them roughly 940-960 In/LBS.

I have another Lorica Kit As shown by Cingetorix for sale (Sold?). All the thoracic plates are already polished.

You Cannot Resist
Sleepy You Must Have Sleepy
Ottoman TURKS! Sofas SUCK
"I can Fight in the Rain". "I can avoid All PAIN".

What ever it takes to keep this Project together. An Ottoman Turkish harness: Pot Lid body; conical spangen w/ slide artic lobster tail, Bazubands, knee cupping Greaves, gorget W/ attached Pauldrons, False Fingered leather artic Gaunts; and SCA knee and elbow cops.
Helm is Stainless, knee and elbows are planned as SS. everything else is 6061 .080 T-6 AA Aluminum.

enough for now... we'll see what gets done this next week for the next round.

And now for an EGO stroke: What do you think of this? a Germandhu with "period" skirting. It paid for an after market head for my Dodge Rampage...
Please note: This just for display Not for sale... the next one???/ Sure

I would like to see the two sets of Gaunts as I might be interested.

Tatsuo Okami wrote: You Cannot Resist
Sleepy You Must Have Sleepy
Ottoman TURKS! Sofas SUCK
"I can Fight in the Rain". "I can avoid All PAIN".

What ever it takes to keep this Project together. An Ottoman Turkish harness: Pot Lid body; conical spangen w/ slide artic lobster tail, Bazubands, knee cupping Greaves, gorget W/ attached Pauldrons, False Fingered leather artic Gaunts; and SCA knee and elbow cops.
Helm is Stainless, knee and elbows are planned as SS. everything else is 6061 .080 T-6 AA Aluminum.

Pictures of teh bazubands, greaves and false fingered gauntlets?

I'm interested in a couple of those cup-hilts, if you have more than one.

Thanks!

what? no back point bascinet with a pig snout? I'm dissapointed. (and am seriously in the market for same)

Potential dibs on the turkish kit, pm me with details?
Thanks

pm sent

Pm sent

Pm sent

OOOh! OOOh! OOOh!
Zunari Kabuto... Will it fit my melon? (23 1/2" (7 1/2 hat size))... If so, how much?

pm sent

I am interested in a large brig gorget.

PM sent.

a bump Because:

so far the Pig face, Sword baskets and Zunari have enough different people interested to Start those on auction.

Anything else???
OH PS thanx to all the folks that just "Bought it Now"

Deleted all the PM's before I could check to see what else was most interested in as an auction item. If you had a piece you wanted to see auctioned... PLEASE RE-send your preference.


Screamin deal available on a Petite fighters Harness (This AND)

Just checking to see if there were any other items people wanted to see up for auction.
Right now its: the pigface (1 Bidder); Sword Basket (next item up ), And the Mild Steel Zunari boshi (last Item.. so far).
Get in any suggestions now.......

What would a start be like on the crossbows?

Oh and all the gaunts would probably move.

Well IF I get enough interest to Auction them:.... Prob 50-60 for the Xbows

Only one pair of Gaunts is finished enough to sell. A SMALL pair of Alum W/ Lthr Artic.

However I am working on a run of Mild steel Mittens w/ hourglass style cuff.

if you are doing the Xbows - I'll go $50 to start it

60 on the crossbow

I think he has 2

wanna split them then 60 on each one randy?either way I am good for 60 on it

I'd go for that, not sure he's decided to auction them yet

If you could put up pics of the Alum gaunts I have a small fighter in need and would front the money so that she could fight other forms like she wants. Let me know and also I am up for the Xbows as well so I would say auction those babies off.

Daithi'