Elbows for sale now with stainless 4/22

Murdock · Post by **Murdock** » Sat Apr 05, 2008 7:04 pm

Been working on a new elbow style

Made 3 sets screwing around

I only have 2 arms

these are again some of Valerius's patterns, made in aircraft aluminum.

They're basically a "Y" and i've got em held together right now with a screw but i'll rivit em soon.

I suppose i could strap em but thats more work.

$35 a pair should make me enough money to get some more stuff to make more stuff in Spring and buy some new Rawhide faces.

[img]http://i44.photobucket.com/albums/f49/Murdoch_McArthur/Aluminumquickelbowsandbreastplat-4.jpg[/img]

[img]http://i44.photobucket.com/albums/f49/Murdoch_McArthur/Aluminumquickelbowsandbreastplat-5.jpg[/img]

[img]http://i44.photobucket.com/albums/f49/Murdoch_McArthur/Aluminumquickelbowsandbreastplat-6.jpg[/img]

Murdock · Post by **Murdock** » Sat Apr 05, 2008 7:05 pm

and again

the dang camera focuses ON THE WALLLL!!!!

Murdock · Post by **Murdock** » Sat Apr 05, 2008 10:29 pm

These pics suck

they're high polished and have the rivits in now

Angusm0628 · Post by **Angusm0628** » Sun Apr 06, 2008 7:03 am

linked this to the household list-serve.
While I don't need them for myself, there are some in my household that may be interested who aren't on the AA

Angus

Murdock · Post by **Murdock** » Sun Apr 06, 2008 8:42 am

i may slap em up on ebay

gonna try em in stainless in a day or so

Hanko Kal · Post by **Hanko Kal** » Sun Apr 06, 2008 9:27 am

What would the S&H be to the Boston, MA area?

Ld Ragnar MacHardy · Post by **Ld Ragnar MacHardy** » Sun Apr 06, 2008 9:29 am

Murdock,

What would the shipping be to 03060? and how large are they?

Ragnar

Murdock · Post by **Murdock** » Sun Apr 06, 2008 9:27 pm

Ragnar looks like $5.67, maybe less depending on exact weight.

Ezrac whats the zip?

but it's probly close

Hanko Kal · Post by **Hanko Kal** » Sun Apr 06, 2008 9:34 pm

Yup, should be pretty close. 01890 is my zip.

Murdock · Post by **Murdock** » Sun Apr 06, 2008 10:16 pm

Unless you have just huge guns these should fit most folks

Murdock · Post by **Murdock** » Mon Apr 07, 2008 10:54 am

The dull side is delaminating on one of the elbows so it's only 2 sets and a stray for the moment.

If i can clean it up it should still be good

if not i'll put some tape oner it and toss it in the loaner
:roll:

the rest are fine

Murdock · Post by **Murdock** » Tue Apr 08, 2008 8:27 am

Ld Ragnar MacHardy · Post by **Ld Ragnar MacHardy** » Tue Apr 08, 2008 10:40 am

PM sent

Murdock · Post by **Murdock** » Wed Apr 09, 2008 12:32 pm

1 set sold

freiman the minstrel · Wed Apr 09, 2008 4:28 pm

Those are beautiful for 35 clams. That's what I would expect to pay for basic floating fishes.

Murdoch, do you offer drilling for points? Those would be perfect for my 14th century kit over a heavy archer's gambeson. If the pointing holes were pre-drilled, it would be perfect.

f

Murdock · Post by **Murdock** » Thu Apr 10, 2008 12:52 am

i suppose i could

if you could show or tell me where ya want em i should be able to

Murdock · Post by **Murdock** » Thu Apr 10, 2008 5:50 pm

Still got a set

anyone?

Murdock · Post by **Murdock** » Fri Apr 11, 2008 11:48 am

Working on a few in Stainless

probly be more since they take longer as the stainless is fussy and mean.

Murdock · Post by **Murdock** » Fri Apr 11, 2008 3:32 pm

Ok got one stainless one made

looks like crap at the moment

Murdock · Post by **Murdock** » Mon Apr 14, 2008 1:26 pm

still have a set of aluminum ones

stainless almost done

Murdock · Post by **Murdock** » Tue Apr 15, 2008 8:39 am

Sold the other set of aluminums

I'll have more in a week

Murdock · Post by **Murdock** » Tue Apr 22, 2008 10:23 am

another set of aluminums avalible.

Got some in stainless too

Gotta charge more for them as they were a biaach to work.

$35 Aluminum

$45 Stainless

They look basically like the ones above.

I'll get some stainless pic

OH and the stainless ones are welded not rivited

Murdock · Post by **Murdock** » Tue Apr 22, 2008 1:05 pm

i also gotta set of stainless "soupcan" elbows

i can let them go for $35 as well

[img]http://i44.photobucket.com/albums/f49/Murdoch_McArthur/Newelbowandrefitofthearms003.jpg[/img]

[img]http://i44.photobucket.com/albums/f49/Murdoch_McArthur/Newelbowandrefitofthearms006.jpg[/img]

pics suck as always but you get the idea

they is real shiny