Page 1 of 1
FS: Hounskull bascinet. NEW!!!
Posted: Fri Aug 08, 2008 2:51 pm
by M.Suprovich
A new Hounskull bascinet with aventaile for sale!
The top is made of 2.5 mm mild hot roll steel, visor of 2 mm mild hot roll steel. The kit goes in mirror polish, the helm has a liner and chin straps. The liner is sewn down to the helmet.
The helmet is made on a head 58-60 sm
The price is 300 Euro + shipping.
For order within 24 hours is supposed a discount!!!
Best regards.
Maxim Suprovich
Posted: Fri Aug 08, 2008 2:52 pm
by M.Suprovich
more pics...
Question
Posted: Fri Aug 08, 2008 3:32 pm
by Hagen
It this a legal SCA helm?
Re: Question
Posted: Fri Aug 08, 2008 3:39 pm
by M.Suprovich
Hagen wrote:It this a legal SCA helm?
yes, of course
Posted: Fri Aug 08, 2008 6:17 pm
by Klaus the Red
Not bad at all. The shape is quite nice. The "cheeks" of the visor are a good distance from the helmet so they cover the vervelles, which is often not done correctly. However, there shouldn't be so much of a gap between the top of the visor and the helmet forehead- think what would happen if someone came down from above with a war hammer or halberd backspike and caught that edge. The visor should form a continuous glancing surface with the helmet when closed- or is it not closed all the way?
Klaus
Posted: Sat Aug 09, 2008 2:38 pm
by M.Suprovich
The visor it is well adjust to the helmet. Man on a photo badly closed it...
An excellent helmet waits the new owner
Posted: Sat Aug 09, 2008 10:51 pm
by Klaus the Red
Yep, that's much better.
Posted: Sun Aug 10, 2008 2:14 pm
by thomas penyngton
PM sent.
thomas p
Posted: Mon Aug 11, 2008 2:35 am
by M.Suprovich
PM answer
Posted: Tue Aug 12, 2008 1:45 pm
by M.Suprovich
new price 260 Euro + shipping
helmet for sale
Posted: Thu Aug 14, 2008 10:17 am
by bartholomew
I was curious if the helmet was still available. Also could you possibly make one in stainless steel? Can the helmet also be quoted less the aventail? I have a stainless rivited aventail here that would be nice for it? Thanks again.
Posted: Mon Aug 18, 2008 4:55 pm
by M.Suprovich
bump
Posted: Mon Aug 18, 2008 7:00 pm
by Wulfgar
Very nice, if I didn't already have a dead sexy bascinet I would be very tempted.
Posted: Sat Aug 23, 2008 1:49 am
by Bruhn Engbrecht
oh so very tempting lol, still a bit to big in the head tho
Posted: Tue Aug 26, 2008 2:34 pm
by M.Suprovich
bump....
Posted: Tue Aug 26, 2008 4:14 pm
by d-farrell2
tempting, but I like the satin polish, myself - I did forward this on to some folks who might be interested though.
Hope you get it sold!
Posted: Tue Aug 26, 2008 5:09 pm
by M.Suprovich
d-farrell2 wrote:tempting, but I like the satin polish, myself - I did forward this on to some folks who might be interested though.
Hope you get it sold!
regrind a helmet on a satin polish very simply
I can do if you will want to purchase a helmet
Posted: Tue Aug 26, 2008 5:17 pm
by d-farrell2
M.Suprovich wrote:d-farrell2 wrote:tempting, but I like the satin polish, myself - I did forward this on to some folks who might be interested though.
Hope you get it sold!
regrind a helmet on a satin polish very simply
I can do if you will want to purchase a helmet
Well, I also just commissioned a helmet.. but it still is tempting
Posted: Fri Aug 29, 2008 4:59 am
by M.Suprovich
d-farrell2 wrote:M.Suprovich wrote:d-farrell2 wrote:tempting, but I like the satin polish, myself - I did forward this on to some folks who might be interested though.
Hope you get it sold!
regrind a helmet on a satin polish very simply
I can do if you will want to purchase a helmet
Well, I also just commissioned a helmet.. but it still is tempting
I do not intrude upon, but suppose that your bacinet not from 12 ga?
Posted: Tue Sep 09, 2008 4:12 pm
by M.Suprovich
bump
Posted: Tue Sep 09, 2008 5:26 pm
by Tancred de Lanvellec
PM sent
Posted: Thu Sep 18, 2008 1:43 pm
by M.Suprovich
new price 240 Euro + shipping....
Interested
Posted: Thu Sep 18, 2008 4:34 pm
by alemen
What would shipping be (approximately) to the West Coast of the US?
Re: Interested
Posted: Fri Sep 19, 2008 1:00 am
by M.Suprovich
alemen wrote:What would shipping be (approximately) to the West Coast of the US?
about 60$
Posted: Fri Sep 19, 2008 6:27 am
by Tarquin Bjornsson
is the aventail riveted or butted?
how wide are the eyeslots?
Interested
Posted: Fri Sep 19, 2008 10:53 am
by alemen
If you'll take 220 Eu ($317 US) + shipping, I'll but it.