WTB custom metal stamp.

Pitbull Armory · Post by **Pitbull Armory** » Mon Mar 09, 2009 9:25 am

Hi there, Does anyone know where I could get a personalized metal stamp made for my armor? Any info would be apreciated.

Thank you

Pitbull

Chretien le Meunier · Post by **Chretien le Meunier** » Mon Mar 09, 2009 9:49 am

I think with your skills, you would be able to fashion one, then have it hardened somewhere...? Just try some different things. For fine detail work- dremel works wonders with the right bits. Clamp the part in a vice, get out some magnifying work glasses, have at it.

Just some thoughts.

Halberds · Post by **Halberds** » Mon Mar 09, 2009 11:14 am

Argon Tool and Manufacturing Co.
1-248-583-1605 ask for Steve.

Send a big picture of your design on the fax machine. Tell em how big the finished size is. This one is 1/2"

Mine was $175.00 USD.

Hal

PS: Yes you can get some tool steel from McMaster-Carr and build yourself one. Check out Follks book, he shows many old armour marks.

Pitbull Armory · Post by **Pitbull Armory** » Tue Mar 10, 2009 2:48 am

Hi there, Chritien thank you for your faith in my skills. I will give a dremel a shot and see if I can come up with a simple design.

Hal thanks for the info. That is out of my pricerange I was expecting more like 60 or 70 dollars though.

Thanks guys

Pitbull

waveicle · Post by **waveicle** » Tue Mar 10, 2009 8:41 am

See my post, I have a smaller stamp, $80 at the time.

http://forums.armourarchive.org/phpBB2/ ... ight=argon

Waveicle

Pitbull Armory · Post by **Pitbull Armory** » Wed Mar 11, 2009 1:41 am

Hi there, Ok thank you for reposting your post Wave, Ill save up and goto Argon for sure. Thank you for your time.

Take care

Pitbull