WildArmoury BIG sale. Update 08.31.2011
- M.Suprovich
- Archive Member
- Posts: 837
- Joined: Wed Jan 09, 2008 3:54 pm
- Location: Ukraine
- Contact:
WildArmoury BIG sale. Update 08.31.2011
I have accumulated a lot of high-quality armor and I have decided to merge it sales in a single topic.
Let's start with the new stuff!
1. SCA legal stainless fluted phrygian.
This helmet made in 2mm (14ga) stainless steel. All holes less than 1 inch!
Chin straps and soft liner. Aventail fastening (can be produce stainless riveted or butted aventail)
Price 650$ include delivery
2. SCA legal stainless custom made greek helmet.
The helmet made in 2mm (14ga) stainless steel. Mirror polish finish, linen padded liner, SCA chin straps.
The helmet good fit on a head 59-61 cm (23.6''-24.4'').
I can modify the helmet at the request of the buyer (I can a bit change the size of the helmet as a large, and the smaller side).
Price 850$ include delivery
3. Three SCA legal bascinet SOLD
4. Blackened hounskull bascinet with brass etching
The helmet made in 2mm (14ga) mild steel. Big padded liner and chin straps. Brass vervailes. I can make the riveted or butted blackened aventail (with brass rivets).
On a head circumference 55-58cm (22''-23,2'')
Price 600$ include shipping
The riveted aventail cost 200$.
5. SCA legal morion. SOLD
Let's start with the new stuff!
1. SCA legal stainless fluted phrygian.
This helmet made in 2mm (14ga) stainless steel. All holes less than 1 inch!
Chin straps and soft liner. Aventail fastening (can be produce stainless riveted or butted aventail)
Price 650$ include delivery
2. SCA legal stainless custom made greek helmet.
The helmet made in 2mm (14ga) stainless steel. Mirror polish finish, linen padded liner, SCA chin straps.
The helmet good fit on a head 59-61 cm (23.6''-24.4'').
I can modify the helmet at the request of the buyer (I can a bit change the size of the helmet as a large, and the smaller side).
Price 850$ include delivery
3. Three SCA legal bascinet SOLD
4. Blackened hounskull bascinet with brass etching
The helmet made in 2mm (14ga) mild steel. Big padded liner and chin straps. Brass vervailes. I can make the riveted or butted blackened aventail (with brass rivets).
On a head circumference 55-58cm (22''-23,2'')
Price 600$ include shipping
The riveted aventail cost 200$.
5. SCA legal morion. SOLD
Last edited by M.Suprovich on Wed Aug 31, 2011 3:30 pm, edited 7 times in total.
- M.Suprovich
- Archive Member
- Posts: 837
- Joined: Wed Jan 09, 2008 3:54 pm
- Location: Ukraine
- Contact:
6. 15th century kettle hat with bevor
14ga mild steel (16ga bevor)
chin straps and linen padded liner
can be modify for SCA fighting
On a head circumference about 60 cm (24'')
Price 350$ include delivery
<a href="http://picasaweb.google.com.ua/lh/photo ... site"><img src="http://lh5.ggpht.com/_fIUmPX8KwBg/TDEJy ... pg"></a><a href="http://picasaweb.google.com.ua/lh/photo ... site"><img src="http://lh6.ggpht.com/_fIUmPX8KwBg/TDEJz ... pg"></a><a href="http://picasaweb.google.com.ua/lh/photo ... site"><img src="http://lh3.ggpht.com/_fIUmPX8KwBg/TDEJz ... 8.jpg"></a>
7. Infantry salet SOLD!!!
8. Stainless infantry salet with bevor
14 ga stainless steel (16ga for bevor)
can be modify for SCA figthing
chin straps and linen padded liner
On a head circumference about 58 cm (23,2'')
Price 380$ include delivery
<a href="http://picasaweb.google.com.ua/lh/photo ... site"><img src="http://lh6.ggpht.com/_fIUmPX8KwBg/TDEKK ... pg"></a><a href="http://picasaweb.google.com.ua/lh/photo ... site"><img src="http://lh5.ggpht.com/_fIUmPX8KwBg/TDEKK ... pg"></a><a href="http://picasaweb.google.com.ua/lh/photo ... site"><img src="http://lh4.ggpht.com/_fIUmPX8KwBg/TDEKL ... 2.jpg"></a>
<a href="http://picasaweb.google.com.ua/lh/photo ... site"><img src="http://lh4.ggpht.com/_fIUmPX8KwBg/TDEKL ... 3.jpg"></a>
9. Blackened infantry salet SOLD!
10.SCA legal norman helmet SOLD!!!
11. SCA legal norman helmet
made in 2mm (14ga) mild steel with hidden protection and batted aventail, padded liner and chin straps in complete set.
It price 345$ include delivery
<a href="http://picasaweb.google.com.ua/lh/photo ... site"><img src="http://lh3.ggpht.com/_fIUmPX8KwBg/S_hPH ... pg"></a><a href="http://picasaweb.google.com.ua/lh/photo ... site"><img src="http://lh3.ggpht.com/_fIUmPX8KwBg/S_hPH ... pg"></a><a href="http://picasaweb.google.com.ua/lh/photo ... site"><img src="http://lh4.ggpht.com/_fIUmPX8KwBg/S_hPI ... 9.jpg"></a>
<a href="http://picasaweb.google.com.ua/lh/photo ... site"><img src="http://lh5.ggpht.com/_fIUmPX8KwBg/S_hPI ... 0.jpg"></a>
14ga mild steel (16ga bevor)
chin straps and linen padded liner
can be modify for SCA fighting
On a head circumference about 60 cm (24'')
Price 350$ include delivery
<a href="http://picasaweb.google.com.ua/lh/photo ... site"><img src="http://lh5.ggpht.com/_fIUmPX8KwBg/TDEJy ... pg"></a><a href="http://picasaweb.google.com.ua/lh/photo ... site"><img src="http://lh6.ggpht.com/_fIUmPX8KwBg/TDEJz ... pg"></a><a href="http://picasaweb.google.com.ua/lh/photo ... site"><img src="http://lh3.ggpht.com/_fIUmPX8KwBg/TDEJz ... 8.jpg"></a>
7. Infantry salet SOLD!!!
8. Stainless infantry salet with bevor
14 ga stainless steel (16ga for bevor)
can be modify for SCA figthing
chin straps and linen padded liner
On a head circumference about 58 cm (23,2'')
Price 380$ include delivery
<a href="http://picasaweb.google.com.ua/lh/photo ... site"><img src="http://lh6.ggpht.com/_fIUmPX8KwBg/TDEKK ... pg"></a><a href="http://picasaweb.google.com.ua/lh/photo ... site"><img src="http://lh5.ggpht.com/_fIUmPX8KwBg/TDEKK ... pg"></a><a href="http://picasaweb.google.com.ua/lh/photo ... site"><img src="http://lh4.ggpht.com/_fIUmPX8KwBg/TDEKL ... 2.jpg"></a>
<a href="http://picasaweb.google.com.ua/lh/photo ... site"><img src="http://lh4.ggpht.com/_fIUmPX8KwBg/TDEKL ... 3.jpg"></a>
9. Blackened infantry salet SOLD!
10.SCA legal norman helmet SOLD!!!
11. SCA legal norman helmet
made in 2mm (14ga) mild steel with hidden protection and batted aventail, padded liner and chin straps in complete set.
It price 345$ include delivery
<a href="http://picasaweb.google.com.ua/lh/photo ... site"><img src="http://lh3.ggpht.com/_fIUmPX8KwBg/S_hPH ... pg"></a><a href="http://picasaweb.google.com.ua/lh/photo ... site"><img src="http://lh3.ggpht.com/_fIUmPX8KwBg/S_hPH ... pg"></a><a href="http://picasaweb.google.com.ua/lh/photo ... site"><img src="http://lh4.ggpht.com/_fIUmPX8KwBg/S_hPI ... 9.jpg"></a>
<a href="http://picasaweb.google.com.ua/lh/photo ... site"><img src="http://lh5.ggpht.com/_fIUmPX8KwBg/S_hPI ... 0.jpg"></a>
Last edited by M.Suprovich on Wed Oct 27, 2010 1:19 pm, edited 2 times in total.
- M.Suprovich
- Archive Member
- Posts: 837
- Joined: Wed Jan 09, 2008 3:54 pm
- Location: Ukraine
- Contact:
12. Milanese cuirass
The milanese cuirass made in 1,5 mm (16ga) mild steel except for plackart at breastplate and backplate (2mm - 14ga mild steel). paining inside.
Very comfortable and articulated!
Completely defenses for chest and back.
Price 700$ + delivery. SOLD
13. Milanese salet-armet SOLD
14. Hardened round shield. SOLD!
A big hardened backler! It is make from 2mm (14ga) spring steel and hardened! The shield have rolled edge (it thickness is about 1cm). I can add the brass ornaments in the shield (cross or lily or something else).
Shield diameter is about 53cm (21.2'')
The price of this is 250$ include delivery
15. Late gothic shoulders
Made in 1,5mm (16ga) mild steel (painting inside)
Made by the images of the shoulders from Leeds Museum.
SOLD
16. Half greaves. SOLD!
17. SCA legal Barbutta helmet with skull-face visor
New hat for the truly "evil men"!
Made in 2mm (14ga) mild steel (visor in 1,5mm mild steel)
Chin straps and soft liner
Good fit on a head 57-61cm (22,8''-24,4'')
Price 480$ include delivery
I want to make the shoulders like skulls.
<a href="http://picasaweb.google.com.ua/lh/photo ... site"><img src="http://lh6.ggpht.com/_fIUmPX8KwBg/TKoz1 ... CF5975.jpg" height="400" width="300"></a><a href="http://picasaweb.google.com.ua/lh/photo ... site"><img src="http://lh3.ggpht.com/_fIUmPX8KwBg/TKoz1 ... CF5976.jpg" height="400" width="300"></a><a href="http://picasaweb.google.com.ua/lh/photo ... site"><img src="http://lh3.ggpht.com/_fIUmPX8KwBg/TKoz1 ... CF5977.jpg" height="400" width="300"></a>
<a href="http://picasaweb.google.com.ua/lh/photo ... site"><img src="http://lh6.ggpht.com/_fIUmPX8KwBg/TKoz2 ... CF5979.jpg" height="400" width="300"></a><a href="http://picasaweb.google.com.ua/lh/photo ... site"><img src="http://lh6.ggpht.com/_fIUmPX8KwBg/TKoz2 ... CF5980.jpg" height="400" width="300"></a>
The milanese cuirass made in 1,5 mm (16ga) mild steel except for plackart at breastplate and backplate (2mm - 14ga mild steel). paining inside.
Very comfortable and articulated!
Completely defenses for chest and back.
Price 700$ + delivery. SOLD
13. Milanese salet-armet SOLD
14. Hardened round shield. SOLD!
A big hardened backler! It is make from 2mm (14ga) spring steel and hardened! The shield have rolled edge (it thickness is about 1cm). I can add the brass ornaments in the shield (cross or lily or something else).
Shield diameter is about 53cm (21.2'')
The price of this is 250$ include delivery
15. Late gothic shoulders
Made in 1,5mm (16ga) mild steel (painting inside)
Made by the images of the shoulders from Leeds Museum.
SOLD
16. Half greaves. SOLD!
17. SCA legal Barbutta helmet with skull-face visor
New hat for the truly "evil men"!
Made in 2mm (14ga) mild steel (visor in 1,5mm mild steel)
Chin straps and soft liner
Good fit on a head 57-61cm (22,8''-24,4'')
Price 480$ include delivery
I want to make the shoulders like skulls.
<a href="http://picasaweb.google.com.ua/lh/photo ... site"><img src="http://lh6.ggpht.com/_fIUmPX8KwBg/TKoz1 ... CF5975.jpg" height="400" width="300"></a><a href="http://picasaweb.google.com.ua/lh/photo ... site"><img src="http://lh3.ggpht.com/_fIUmPX8KwBg/TKoz1 ... CF5976.jpg" height="400" width="300"></a><a href="http://picasaweb.google.com.ua/lh/photo ... site"><img src="http://lh3.ggpht.com/_fIUmPX8KwBg/TKoz1 ... CF5977.jpg" height="400" width="300"></a>
<a href="http://picasaweb.google.com.ua/lh/photo ... site"><img src="http://lh6.ggpht.com/_fIUmPX8KwBg/TKoz2 ... CF5979.jpg" height="400" width="300"></a><a href="http://picasaweb.google.com.ua/lh/photo ... site"><img src="http://lh6.ggpht.com/_fIUmPX8KwBg/TKoz2 ... CF5980.jpg" height="400" width="300"></a>
Last edited by M.Suprovich on Sun Feb 06, 2011 2:17 am, edited 6 times in total.
- Theodwyn Kelsale
- Archive Member
- Posts: 450
- Joined: Mon Nov 02, 2009 6:26 pm
- Location: Barony of Caer Anterth Mawr -- Kingdom of Northshield
- Contact:
- Sean Powell
- Archive Member
- Posts: 9908
- Joined: Sat Jul 13, 2002 1:01 am
- Location: Holden MA
- M.Suprovich
- Archive Member
- Posts: 837
- Joined: Wed Jan 09, 2008 3:54 pm
- Location: Ukraine
- Contact:
Alas, this helmet is small will be on your head.Sean Powell wrote:Maxim,
You would have to be selling this blackened 14th cent helm while I still owe you $500 for the Rene style helm. You arn't making it easy to resist. Does it fit my head casting?
But I can make exact the same helmet, ideally suited to your head.
Offer to wholesalers! When you buy 3 items - 10% free, four or five - 15% free, more than five things - 20% free.
- Pitbull Armory
- Archive Member
- Posts: 5312
- Joined: Wed Dec 17, 2008 10:28 pm
- Location: Out in the woods
- Contact:
hi
Hi Mr Suprovitch, when I look at your armor Im amazed by the shapes and crisp lines you achieve, Espesially in 14g stainless?? That is incredible, I dont even like shaping 18g stainless!
Do you work the stainless hot or cold? Are you in any of the pics?
Im really having troubly not buying one of your klap bascinets or the bellows face sallet. I would like to be able to see your armor first hand.
Keep up the great work.
All the best
Pitbull
Do you work the stainless hot or cold? Are you in any of the pics?
Im really having troubly not buying one of your klap bascinets or the bellows face sallet. I would like to be able to see your armor first hand.
Keep up the great work.
All the best
Pitbull
Hi, Please visit https://www.facebook.com/PITBULL-ARMORY-264094743168/ if you get time. Or contact me at leiderandy@yahoo.com if you have any questions. Take care, Andy @ Pitbull Armory
-
- New Member
- Posts: 8
- Joined: Mon Oct 27, 2008 12:58 am
- Location: Ukraine
- Contact:
-
- New Member
- Posts: 8
- Joined: Mon Oct 27, 2008 12:58 am
- Location: Ukraine
- Contact:
- Sean Powell
- Archive Member
- Posts: 9908
- Joined: Sat Jul 13, 2002 1:01 am
- Location: Holden MA
It's better this way. I need to make the last payment on the great bascinet first and I would rather you finish that for me then to start a new helm. Besides I have been thinking about a mid 15th cent kettle hat raised in all period construction techniques. We can talk details after the GB is done.M.Suprovich wrote:Alas, this helmet is small will be on your head.Sean Powell wrote:Maxim,
You would have to be selling this blackened 14th cent helm while I still owe you $500 for the Rene style helm. You arn't making it easy to resist. Does it fit my head casting?
But I can make exact the same helmet, ideally suited to your head.
Pitbull: Not certain what Maxims exact technique is but it definetly involves heat to get the shape. Cold work just can not achieve the right shape. If you ask nicely he may post in-progress pics of his work on my new helm. It has some of the sexiest shape and crispest lines I've ever seen.
Sean
- M.Suprovich
- Archive Member
- Posts: 837
- Joined: Wed Jan 09, 2008 3:54 pm
- Location: Ukraine
- Contact:
Re: hi
You can see me herePitbull Armory wrote:Hi Mr Suprovitch, when I look at your armor Im amazed by the shapes and crisp lines you achieve, Espesially in 14g stainless?? That is incredible, I dont even like shaping 18g stainless!
Do you work the stainless hot or cold? Are you in any of the pics?
Im really having troubly not buying one of your klap bascinets or the bellows face sallet. I would like to be able to see your armor first hand.
Keep up the great work.
All the best
Pitbull
http://www.facebook.com/profile.php?id=100000269843814
Some work can not be done without heating the metal. I still do not know a lot, but really want to learn its and to contribute to this my customers.
- M.Suprovich
- Archive Member
- Posts: 837
- Joined: Wed Jan 09, 2008 3:54 pm
- Location: Ukraine
- Contact:
-
- Archive Member
- Posts: 1073
- Joined: Sun Nov 12, 2006 11:58 pm
- Location: Birmingham, AL (Iron Mountain, Meridies)
Alright man, I like most of your stuff. But why ON EARTH are the chin sections so huge and jutting out? It really detracts (in my opinion) from the helms, doesn't look historically accurate, and detracts from their effectiveness (in SCA fighting) b/c they stick out so far.
So what's the deal?
So what's the deal?
Animal Weretiger wrote:You fight like a big puddin.
- M.Suprovich
- Archive Member
- Posts: 837
- Joined: Wed Jan 09, 2008 3:54 pm
- Location: Ukraine
- Contact:
To be honest I can not say why so many of my things so long in sale.Cisco wrote:Alright man, I like most of your stuff. But why ON EARTH are the chin sections so huge and jutting out? It really detracts (in my opinion) from the helms, doesn't look historically accurate, and detracts from their effectiveness (in SCA fighting) b/c they stick out so far.
So what's the deal?
Alas,as I live and work in Ukraine, payment orders a bit more complicated than in Western Europe or in the USA. Also people do not always trust.
I have absolutely no sense to cheat someone - it will destroy my reputation and I can not sell anything. Therefore, I am working transparently and often make concessions for customers...
- M.Suprovich
- Archive Member
- Posts: 837
- Joined: Wed Jan 09, 2008 3:54 pm
- Location: Ukraine
- Contact:
New hour-glass gauntlets for sale
Made in 1,5 (16ga) mild steel
I can add the leather gloves.
SOLD
Made in 1,5 (16ga) mild steel
I can add the leather gloves.
SOLD
Last edited by M.Suprovich on Mon Nov 08, 2010 3:49 pm, edited 1 time in total.
I can say that he will rework the face if you want him to he just redid my face on the helm he is making me Buy from this guy hes a breeze to work with and relly can make anything and the price is greatM.Suprovich Posted: Thu Oct 07, 2010 10:25 am Post subject:
--------------------------------------------------------------------------------
Cisco wrote:
Alright man, I like most of your stuff. But why ON EARTH are the chin sections so huge and jutting out? It really detracts (in my opinion) from the helms, doesn't look historically accurate, and detracts from their effectiveness (in SCA fighting) b/c they stick out so far.
So what's the deal?
To be honest I can not say why so many of my things so long in sale.
Alas,as I live and work in Ukraine, payment orders a bit more complicated than in Western Europe or in the USA. Also people do not always trust.
I have absolutely no sense to cheat someone - it will destroy my reputation and I can not sell anything. Therefore, I am working transparently and often make concessions for customers...
Cody
Nissan Maxima wrote:Fuck their eyeballs.
- M.Suprovich
- Archive Member
- Posts: 837
- Joined: Wed Jan 09, 2008 3:54 pm
- Location: Ukraine
- Contact:
I'll take #14 the Spring Steel Round Shield. I don't see it on your site so just point me where I need to pay and give you my shipping info.
Rey
Rey
----------------------------------
Count Rey RiBeaumont
Gleann Abhann
sirrey@gmail.com
----------------------------------
Count Rey RiBeaumont
Gleann Abhann
sirrey@gmail.com
----------------------------------
- M.Suprovich
- Archive Member
- Posts: 837
- Joined: Wed Jan 09, 2008 3:54 pm
- Location: Ukraine
- Contact:
update.
Two shovel face bascinet return to sale.
For increase its strength I've added additional plates inside the helmet of 2mm steel for the most vulnerable parts. Now the thickness of the helmet in such places more than 3mm (!!!!).
Price the same 300$ include delivery to US or Europe.
<a href="http://picasaweb.google.com.ua/lh/photo ... site"><img src="http://lh4.ggpht.com/_fIUmPX8KwBg/TLlnJ ... CF6027.jpg" height="300" width="400"></a> <a href="http://picasaweb.google.com.ua/lh/photo ... site"><img src="http://lh4.ggpht.com/_fIUmPX8KwBg/TLlnK ... CF6028.jpg" height="400" width="300"></a>
Two shovel face bascinet return to sale.
For increase its strength I've added additional plates inside the helmet of 2mm steel for the most vulnerable parts. Now the thickness of the helmet in such places more than 3mm (!!!!).
Price the same 300$ include delivery to US or Europe.
<a href="http://picasaweb.google.com.ua/lh/photo ... site"><img src="http://lh4.ggpht.com/_fIUmPX8KwBg/TLlnJ ... CF6027.jpg" height="300" width="400"></a> <a href="http://picasaweb.google.com.ua/lh/photo ... site"><img src="http://lh4.ggpht.com/_fIUmPX8KwBg/TLlnK ... CF6028.jpg" height="400" width="300"></a>
- M.Suprovich
- Archive Member
- Posts: 837
- Joined: Wed Jan 09, 2008 3:54 pm
- Location: Ukraine
- Contact:
the blackened onion top hounskull bascinet have the aventail now!
New price 750$ (with blackened riveted aventail) include delivery to US or Europe
<a href="http://picasaweb.google.com.ua/lh/photo ... site"><img src="http://lh3.ggpht.com/_fIUmPX8KwBg/TMH9K ... CF6038.jpg" height="400" width="300"></a><a href="http://picasaweb.google.com.ua/lh/photo ... site"><img src="http://lh4.ggpht.com/_fIUmPX8KwBg/TMH9K ... CF6040.jpg" height="400" width="300"></a><a href="http://picasaweb.google.com.ua/lh/photo ... site"><img src="http://lh5.ggpht.com/_fIUmPX8KwBg/TMH9L ... CF6041.jpg" height="400" width="300"></a>
<a href="http://picasaweb.google.com.ua/lh/photo ... site"><img src="http://lh5.ggpht.com/_fIUmPX8KwBg/TMH9L ... CF6042.jpg" height="400" width="300"></a><a href="http://picasaweb.google.com.ua/lh/photo ... site"><img src="http://lh5.ggpht.com/_fIUmPX8KwBg/TMH9L ... CF6043.jpg" height="400" width="300"></a>
New price 750$ (with blackened riveted aventail) include delivery to US or Europe
<a href="http://picasaweb.google.com.ua/lh/photo ... site"><img src="http://lh3.ggpht.com/_fIUmPX8KwBg/TMH9K ... CF6038.jpg" height="400" width="300"></a><a href="http://picasaweb.google.com.ua/lh/photo ... site"><img src="http://lh4.ggpht.com/_fIUmPX8KwBg/TMH9K ... CF6040.jpg" height="400" width="300"></a><a href="http://picasaweb.google.com.ua/lh/photo ... site"><img src="http://lh5.ggpht.com/_fIUmPX8KwBg/TMH9L ... CF6041.jpg" height="400" width="300"></a>
<a href="http://picasaweb.google.com.ua/lh/photo ... site"><img src="http://lh5.ggpht.com/_fIUmPX8KwBg/TMH9L ... CF6042.jpg" height="400" width="300"></a><a href="http://picasaweb.google.com.ua/lh/photo ... site"><img src="http://lh5.ggpht.com/_fIUmPX8KwBg/TMH9L ... CF6043.jpg" height="400" width="300"></a>
Whats the Padding like on the inside of that helmet? I have 24" head and didn't know if it could be changed around to accommodate that. Also can you give me a total weight on it as well?
Ray
Ray
M.Suprovich wrote:the blackened onion top hounskull bascinet have the aventail now!
New price 750$ (with blackened riveted aventail) include delivery to US or Europe
<a href="http://picasaweb.google.com.ua/lh/photo ... site"><img src="http://lh3.ggpht.com/_fIUmPX8KwBg/TMH9K ... CF6038.jpg" height="400" width="300"></a><a href="http://picasaweb.google.com.ua/lh/photo ... site"><img src="http://lh4.ggpht.com/_fIUmPX8KwBg/TMH9K ... CF6040.jpg" height="400" width="300"></a><a href="http://picasaweb.google.com.ua/lh/photo ... site"><img src="http://lh5.ggpht.com/_fIUmPX8KwBg/TMH9L ... CF6041.jpg" height="400" width="300"></a>
<a href="http://picasaweb.google.com.ua/lh/photo ... site"><img src="http://lh5.ggpht.com/_fIUmPX8KwBg/TMH9L ... CF6042.jpg" height="400" width="300"></a><a href="http://picasaweb.google.com.ua/lh/photo ... site"><img src="http://lh5.ggpht.com/_fIUmPX8KwBg/TMH9L ... CF6043.jpg" height="400" width="300"></a>
- M.Suprovich
- Archive Member
- Posts: 837
- Joined: Wed Jan 09, 2008 3:54 pm
- Location: Ukraine
- Contact:
new helmet to my sale topic.
Absolute new Spangenhelm
Made in 2mm (14ga) blackened or only polished mild steel (2mm brass nasal plate)
Etching at nasal plate
Liner and chin straps (have not installed on the helmet yet)
Price 650$ include delivery
<a href="http://picasaweb.google.com.ua/lh/photo ... site"><img src="http://lh4.ggpht.com/_fIUmPX8KwBg/TMhqr ... CF6052.jpg" height="400" width="300"></a><a href="http://picasaweb.google.com.ua/lh/photo ... site"><img src="http://lh6.ggpht.com/_fIUmPX8KwBg/TMhqs ... CF6054.jpg" height="400" width="300"></a><a href="http://picasaweb.google.com.ua/lh/photo ... site"><img src="http://lh3.ggpht.com/_fIUmPX8KwBg/TMhqs ... CF6057.jpg" height="400" width="300"></a>
<a href="http://picasaweb.google.com.ua/lh/photo ... site"><img src="http://lh4.ggpht.com/_fIUmPX8KwBg/TMhqs ... CF6058.jpg" height="400" width="300"></a>
Absolute new Spangenhelm
Made in 2mm (14ga) blackened or only polished mild steel (2mm brass nasal plate)
Etching at nasal plate
Liner and chin straps (have not installed on the helmet yet)
Price 650$ include delivery
<a href="http://picasaweb.google.com.ua/lh/photo ... site"><img src="http://lh4.ggpht.com/_fIUmPX8KwBg/TMhqr ... CF6052.jpg" height="400" width="300"></a><a href="http://picasaweb.google.com.ua/lh/photo ... site"><img src="http://lh6.ggpht.com/_fIUmPX8KwBg/TMhqs ... CF6054.jpg" height="400" width="300"></a><a href="http://picasaweb.google.com.ua/lh/photo ... site"><img src="http://lh3.ggpht.com/_fIUmPX8KwBg/TMhqs ... CF6057.jpg" height="400" width="300"></a>
<a href="http://picasaweb.google.com.ua/lh/photo ... site"><img src="http://lh4.ggpht.com/_fIUmPX8KwBg/TMhqs ... CF6058.jpg" height="400" width="300"></a>
- M.Suprovich
- Archive Member
- Posts: 837
- Joined: Wed Jan 09, 2008 3:54 pm
- Location: Ukraine
- Contact:
-
- Archive Member
- Posts: 61
- Joined: Wed Feb 06, 2008 10:58 am
- Location: Lansdowne, VA
- M.Suprovich
- Archive Member
- Posts: 837
- Joined: Wed Jan 09, 2008 3:54 pm
- Location: Ukraine
- Contact:
- M.Suprovich
- Archive Member
- Posts: 837
- Joined: Wed Jan 09, 2008 3:54 pm
- Location: Ukraine
- Contact:
- M.Suprovich
- Archive Member
- Posts: 837
- Joined: Wed Jan 09, 2008 3:54 pm
- Location: Ukraine
- Contact:
Another one helmet for sale.
Fluted shovel face bascinet
Made in 2mm (14ga) mild steel
Satin polish finish
Liner and chin straps
Price 400$ include delivery to US or Europe
<a href="http://picasaweb.google.com/lh/photo/Lp ... site"><img src="http://lh6.ggpht.com/_fIUmPX8KwBg/TMqJs ... CF6059.jpg" height="400" width="300"></a><a href="http://picasaweb.google.com/lh/photo/Of ... site"><img src="http://lh6.ggpht.com/_fIUmPX8KwBg/TMqJt ... CF6060.jpg" height="400" width="300"></a><a href="http://picasaweb.google.com/lh/photo/VT ... site"><img src="http://lh6.ggpht.com/_fIUmPX8KwBg/TMqJt ... CF6061.jpg" height="400" width="300"></a>
<a href="http://picasaweb.google.com/lh/photo/5J ... site"><img src="http://lh3.ggpht.com/_fIUmPX8KwBg/TMqJt ... CF6063.jpg" height="400" width="300"></a><a href="http://picasaweb.google.com/lh/photo/ZM ... site"><img src="http://lh5.ggpht.com/_fIUmPX8KwBg/TMqJt ... CF6064.jpg" height="400" width="300"></a>
Fluted shovel face bascinet
Made in 2mm (14ga) mild steel
Satin polish finish
Liner and chin straps
Price 400$ include delivery to US or Europe
<a href="http://picasaweb.google.com/lh/photo/Lp ... site"><img src="http://lh6.ggpht.com/_fIUmPX8KwBg/TMqJs ... CF6059.jpg" height="400" width="300"></a><a href="http://picasaweb.google.com/lh/photo/Of ... site"><img src="http://lh6.ggpht.com/_fIUmPX8KwBg/TMqJt ... CF6060.jpg" height="400" width="300"></a><a href="http://picasaweb.google.com/lh/photo/VT ... site"><img src="http://lh6.ggpht.com/_fIUmPX8KwBg/TMqJt ... CF6061.jpg" height="400" width="300"></a>
<a href="http://picasaweb.google.com/lh/photo/5J ... site"><img src="http://lh3.ggpht.com/_fIUmPX8KwBg/TMqJt ... CF6063.jpg" height="400" width="300"></a><a href="http://picasaweb.google.com/lh/photo/ZM ... site"><img src="http://lh5.ggpht.com/_fIUmPX8KwBg/TMqJt ... CF6064.jpg" height="400" width="300"></a>
- Chris Cottrell
- Archive Member
- Posts: 145
- Joined: Sun Nov 01, 2009 9:13 pm
- Location: Portland
- Contact:
Just for the record, Maxim is extremely good and very fast. If I didn't already have a great helmet from him (that I love), I'd spend the next month eating dirt to get my hands on one! Heck, I'm having trouble NOT buying right now (I'd certainly be the best-looking guy at the homeless shelter).
Also, he's good about working with you for custom elements (like a WMA perforated bevor, in my case).
Five stars, friends, five stars.
Also, he's good about working with you for custom elements (like a WMA perforated bevor, in my case).
Five stars, friends, five stars.
- M.Suprovich
- Archive Member
- Posts: 837
- Joined: Wed Jan 09, 2008 3:54 pm
- Location: Ukraine
- Contact:
-
- Archive Member
- Posts: 855
- Joined: Tue Aug 17, 2004 12:59 pm
- Location: Memphis, TN / Barony of Grey Niche, Kingdom of Gleann Abhann
Both the spangen and the blackened hounskull are very attractive helms!
- Sir Lorccan hua Conchobair
Former armourer at Darkwood Armory, now just armouring a bit for fun.
"I've schlepped ugly gear about the field. It does not inspire -- not me, not anybody. Better to try and make it pretty." - Konstantin the Red
Former armourer at Darkwood Armory, now just armouring a bit for fun.
"I've schlepped ugly gear about the field. It does not inspire -- not me, not anybody. Better to try and make it pretty." - Konstantin the Red