Celata still available

Jess · Post by **Jess** » Sat May 12, 2012 3:27 pm

I bought this celata made by Sir Donngal from Windrose maybe five years ago as an impulse buy for a harness I never got around to making. It is mild steel with an industrial blackend finish. Brass rosettes and trim with etching. I don't know what gauge it is. I'll find some calipers to measure later. Medium size. The celata is about 26.5" around the brow measured from the inside of the helmet. 9.5" front to back and 7.5" side to side. My head is 21.5" and I am guesstimating this will fit around a 23" head. It has never been strapped or worn. Mostly I looked at it like it was an expensive vase. $900 includes shipping in the continental US.

http://i923.photobucket.com/albums/ad72 ... 3front.jpg
http://i923.photobucket.com/albums/ad72 ... ta1sde.jpg
http://i923.photobucket.com/albums/ad72 ... a2back.jpg
http://i923.photobucket.com/albums/ad72 ... a4plum.jpg
http://i923.photobucket.com/albums/ad72 ... 5brass.jpg
http://i923.photobucket.com/albums/ad72 ... uction.jpg

Next, a pair of 14g stainless legs and greaves that have seen hard use. I believe the original owner got them from Revival. He added stainless wrap plates for additional protection. I added a bunch of scratches, dents, and a crack to the knee cop. I have had the crack on the knee welded and ground down but the repair aint pretty. I'm 5'5" and 180 pounds but I have freakishly long femurs. So these are more likely to fit someone 5'10"ish I would guess. The greaves wouldn't work in combination with the legs for me, so I ground out the greave pin and rounded off the edges of the greaves where they came into contact with my turnshoes so they would fit my short person. Measurements of cuisses and greaves in the pictures. Let me know if you need any others. $125 includes shipping in the 48. SOLD to lordnugg

http://i923.photobucket.com/albums/ad72 ... /legs1.jpg
http://i923.photobucket.com/albums/ad72 ... eeweld.jpg
http://i923.photobucket.com/albums/ad72 ... pplate.jpg
http://i923.photobucket.com/albums/ad72 ... gs4fan.jpg
http://i923.photobucket.com/albums/ad72 ... ounded.jpg
http://i923.photobucket.com/albums/ad72 ... length.jpg
http://i923.photobucket.com/albums/ad72 ... gdents.jpg
http://i923.photobucket.com/albums/ad72 ... ddents.jpg
http://i923.photobucket.com/albums/ad72 ... length.jpg

Jess · Post by **Jess** » Sat May 12, 2012 3:33 pm

I bought these stainless couters second hand about three years ago, but they were new and never used at the time, and I haven't strapped or used them either. I believe they were made by Jackie at Shamrock. They are small, about 5" across. Let me know if you need additional measurements. $50 includes shipping in the 48. SOLD and shipped
http://i923.photobucket.com/albums/ad72 ... s3back.jpg
http://i923.photobucket.com/albums/ad72 ... s2side.jpg
http://i923.photobucket.com/albums/ad72 ... inside.jpg

Jess · Post by **Jess** » Sat May 12, 2012 3:42 pm

Edward of Blackthorn · Sat May 12, 2012 4:50 pm

dibs on the legs

Klaus the Red · Post by **Klaus the Red** » Sat May 12, 2012 5:21 pm

Dibs on the breastplate pending additional measurements- I'd like to know the width across the chest. Is that 16 gauge?

Klaus

Kilian_the_warlike · Post by **Kilian_the_warlike** » Sat May 12, 2012 6:59 pm

Any possibility of getting a measurement on the elbows ala Stonekeep's system? http://spiers-saddlery.stores.yahoo.net/elbows.html

If so, dibs on a friend's behalf.

Jess · Post by **Jess** » Sat May 12, 2012 9:26 pm

http://i923.photobucket.com/albums/ad72 ... 204709.jpg
http://i923.photobucket.com/albums/ad72 ... 204541.jpg
http://i923.photobucket.com/albums/ad72 ... 204502.jpg
http://i923.photobucket.com/albums/ad72 ... 204428.jpg

Not sure what gauge. Maybe Murdoch remembers? Its about 9" across at the top and then tapers to 11" further down the chest. It is about 22 1/2 around under the arms and 20" at the narrower bottom. Hope that helps.

Jess · Post by **Jess** » Sat May 12, 2012 9:50 pm

Your friend needs to be a scrawny guy or woman under 200 pounds for these elbows to fit. I don't really undertstand the Stonekeep thing. Won't that just give you the measurement of my arm with whatever elbow pad I am wearing? Does a straight across measurement help? If so, http://i923.photobucket.com/albums/ad72 ... 214623.jpg

Jess · Post by **Jess** » Sat May 12, 2012 10:33 pm

The celata is about 26.5" around the brow measured from the inside of the helmet. 9.5" front to back and 7.5" side to side. My head is 21.5" and I am guesstimating this will fit around a 23" head

Adamo · Post by **Adamo** » Sat May 12, 2012 10:50 pm

If the breastplate is still available, I am interested.

Adam

Klaus the Red · Post by **Klaus the Red** » Sat May 12, 2012 11:03 pm

Sorry, Adamo, the precious is mine! Seems like a perfect fit for me by the numbers. (However, it means I'll be de-accessioning my old one soon, if you're interested...)

Jess, sold. Paypal?

Jess · Post by **Jess** » Sat May 12, 2012 11:06 pm

Sure. Jessmccarthysemail@gmail.com
Send me your addy and I'll get this out to you.

Klaus the Red · Post by **Klaus the Red** » Sat May 12, 2012 11:14 pm

PM sent- thanks! (PM speed being what it is, you may not get it for a while, but the address is included with the PayPal message.)

Kilian_the_warlike · Post by **Kilian_the_warlike** » Sat May 12, 2012 11:39 pm

Jess wrote:Your friend needs to be a scrawny guy or woman under 200 pounds for these elbows to fit. I don't really undertstand the Stonekeep thing. Won't that just give you the measurement of my arm with whatever elbow pad I am wearing? Does a straight across measurement help? If so, http://i923.photobucket.com/albums/ad72 ... 214623.jpg

He's scrawny, but lanky as hell. I'll check with him in the morning.

PatternWeld · Post by **PatternWeld** » Sun May 13, 2012 1:17 am

Verry interested in the greaves in case the OP falls through on dibbs.

Kilian_the_warlike · Post by **Kilian_the_warlike** » Sun May 13, 2012 5:16 pm

Dibs for elbows are off. He's worried his elbows would be too boney for them

Cedric Adolphus · Post by **Cedric Adolphus** » Sun May 13, 2012 6:31 pm

Gah! That helm is exactly what I have been hunting for but far beyond my price range, don't suppose you'd take a trade of my Turkish helm and some money on the side?

Esconor DuClass · Post by **Esconor DuClass** » Sun May 13, 2012 11:42 pm

I would love to know if the Helmet is still available. if its 16ga I would like to purchase it

email me if it is still available I will pay for P&H to Australia

Regards

Jess · Post by **Jess** » Mon May 14, 2012 7:57 am

The helmet is still available, but I am certain it is heavier than 16 g. It is a high end helm made for SCA. Just using a ruler and measuring the thickness at the face with a ruler where it is visible, it is maybe 2.5 mm and thinner towards the tail at 2mm. Of course the way it is worked, I would think it might be thinner towards the edge. I'm guessing it is 12 g at the skull and 14g at the bottom.
If you are still intetested, let me know your prefered shipping carrier and I will get a shipping estimate. I will give you $50 credit towards the shipping. You pay whatever it costs to ship over $50.

Jess · Post by **Jess** » Tue May 15, 2012 7:08 am

Jess · Post by **Jess** » Thu May 17, 2012 1:57 pm

Md02geist · Post by **Md02geist** » Thu May 17, 2012 3:16 pm

Just a darn good looking helmet. It really is.

Jess · Post by **Jess** » Tue May 22, 2012 12:25 pm

Celata still available

Celata still available

Re: Celata, legs, elbows, and breastplate

Re: Celata, legs, elbows, and breastplate

Re: Celata, legs, elbows, and breastplate

Re: Celata, legs, elbows, and breastplate

Re: Celata, legs, elbows, and breastplate

Re: Celata, legs, elbows, and breastplate

Re: Celata, legs, elbows, and breastplate

Re: Celata, legs, elbows, and breastplate

Re: Celata, legs, elbows, and breastplate

Re: Celata, legs, elbows, and breastplate

Re: Celata, legs, elbows, and breastplate

Re: Celata, legs, elbows, and breastplate

Re: Celata, legs, elbows, and breastplate

Re: Celata, legs, elbows, and breastplate

Re: Celata, legs, elbows, and breastplate

Re: Celata, legs, elbows, and breastplate

Re: Celata, legs, elbows, and breastplate

Re: Celata, legs, elbows, and breastplate

Re: Celata, legs (sold pend weds payment), elbows

Re: Celata and elbows still available

Re: Celata and elbows still available

Re: Celata still available