Hjalmarhiem Armoury -back from the dead!

For trading/Selling/and posting items that you need very badly.
Post Reply
hjalmr
Archive Member
Posts: 3387
Joined: Mon Dec 03, 2001 2:01 am
Location: Memphis, TN.
Contact:

Hjalmarhiem Armoury -back from the dead!

Post by hjalmr »

Greetings. Been a really F'ed up year or so but I am back to making armor. I am still trying to get the kinks out and catch up on a few back orders, but I hope to be all free and clear soon. I am also out of stainless steel and it will probably take me a awhile to get up the cash to buy another sheet. So until then, I am going to make mild steel stock helmets and non-helmet items (gorgets, gauntlets, etc). As soon as I get $300 for stainless -I'll get back on this list. From now on I will only take one commission at a time. It took 20 years to happen, but taking so many orders and payment up front finally caught up to me and it was a disaster! I learned my lesson. I looked up my last update and it seems that my current status is:

1) John Welch (14g SS Russian Helmet) - 0% Fiinished.
2) Rex Meyer (14g SS Kettlehelm) - 0% Fiinished.
3) Jim Nesbitt (14g SS Skullcap) - 0% finished.

Everyone elses order was finished and shipped months ago during my scramble to remain above water...

If your not on the list and should be -please contact me.

(^_^)
Hjalmar of Sognefjord
Squire to Duke Sir John The Bearkiller
Barony of Grey Niche, Kingdom of Glean Ahbann.

"True nobility is not measured by being superior to another, but rather by becoming superior to oneself."
User avatar
accdntprone
Archive Member
Posts: 2107
Joined: Thu Aug 10, 2000 1:01 am
Location: Gaffney, SC.

Re: Hjalmarhiem Armoury -back from the dead!

Post by accdntprone »

Good to have you back bro.
Poster child for poor impulse control....
Dougal Forester
Archive Member
Posts: 988
Joined: Sat Aug 31, 2002 1:01 am
Location: Millville, NJ USA

Re: Hjalmarhiem Armoury -back from the dead!

Post by Dougal Forester »

Delighted to see you return! What alloy of as do you typically use? Have you ever worked in 304 or 301?

Matthias
User avatar
Hamish Nisbet
Archive Member
Posts: 582
Joined: Thu Mar 31, 2011 5:03 am
Location: Green Bay, WI, Barony of Windhaven, Kingdom of Northshield

Re: Hjalmarhiem Armoury -back from the dead!

Post by Hamish Nisbet »

Excellent. also as #3, I wanna get in queue to be in queue for another helmet.....
Baronet Hamish de Nisbet, OP
Northshield Kingdom Armored Combat Marshall
hjalmr
Archive Member
Posts: 3387
Joined: Mon Dec 03, 2001 2:01 am
Location: Memphis, TN.
Contact:

Re: Hjalmarhiem Armoury -back from the dead!

Post by hjalmr »

Dougal Forester wrote:Delighted to see you return! What alloy of as do you typically use? Have you ever worked in 304 or 301?

Matthias
My stainless is 304.
Hjalmar of Sognefjord
Squire to Duke Sir John The Bearkiller
Barony of Grey Niche, Kingdom of Glean Ahbann.

"True nobility is not measured by being superior to another, but rather by becoming superior to oneself."
User avatar
Edward MacTavish
Archive Member
Posts: 1846
Joined: Tue Oct 14, 2003 1:01 am
Location: Washington state
Contact:

Re: Hjalmarhiem Armoury -back from the dead!

Post by Edward MacTavish »

When you get stainless back in what guages will you have?

Edward
Sir Edward Lindey, Knight of the Drawn Sword. ACL/BotN 2012

Saint Hubert's Rangers

Men of steel, in suits of iron forged legends of valour untarnished by time.

Argent, a boar statant and on a chief gules an arrow Or
leekellerking
Archive Member
Posts: 964
Joined: Sun Jul 17, 2011 6:52 pm
Location: Stargate, Ansteorra (Texas)

Re: Hjalmarhiem Armoury -back from the dead!

Post by leekellerking »

Awesome!
I'm not old; I'm vintage!
Warin
New Member
Posts: 6
Joined: Wed Aug 14, 2013 12:51 pm

Re: Hjalmarhiem Armoury -back from the dead!

Post by Warin »

do you have a pair of fanless elbow cops handy? I am in need of a pair
hjalmr
Archive Member
Posts: 3387
Joined: Mon Dec 03, 2001 2:01 am
Location: Memphis, TN.
Contact:

Re: Hjalmarhiem Armoury -back from the dead!

Post by hjalmr »

Warin wrote:do you have a pair of fanless elbow cops handy? I am in need of a pair

yes -I do.

$10 + shipping. PM me your zipcode.
Hjalmar of Sognefjord
Squire to Duke Sir John The Bearkiller
Barony of Grey Niche, Kingdom of Glean Ahbann.

"True nobility is not measured by being superior to another, but rather by becoming superior to oneself."
hjalmr
Archive Member
Posts: 3387
Joined: Mon Dec 03, 2001 2:01 am
Location: Memphis, TN.
Contact:

Re: Hjalmarhiem Armoury -back from the dead!

Post by hjalmr »

Edward MacTavish wrote:When you get stainless back in what guages will you have?

Edward

14g.

However I am trying to get a bit of 16g for some non-helmet items...

(^_^)
Hjalmar of Sognefjord
Squire to Duke Sir John The Bearkiller
Barony of Grey Niche, Kingdom of Glean Ahbann.

"True nobility is not measured by being superior to another, but rather by becoming superior to oneself."
Caius705
Archive Member
Posts: 2449
Joined: Wed Aug 01, 2012 4:42 pm
Location: Barony of Bordermarch, Ansteorra

Re: Hjalmarhiem Armoury -back from the dead!

Post by Caius705 »

Any chance of you getting 12g stainless (or mild I suppose)? I ordered an ACL helmet in 12 mild and when it eventually gets destroyed, I'd thought about pulling the visor off it and moving it to a new helm. Just a thought.
"This quote was enough reason on its own to join AA. Period."
-Scott Landua
User avatar
Edward MacTavish
Archive Member
Posts: 1846
Joined: Tue Oct 14, 2003 1:01 am
Location: Washington state
Contact:

Re: Hjalmarhiem Armoury -back from the dead!

Post by Edward MacTavish »

how much would a sheet of 12ga stainless cost you? I believe that some of the ACL guys and my self would be intrested in buying helmets in that guage. I would really like a kettle helm in the 12ga stainless. Let me know and I will see if I can get some guys to buy helmets. Also unlike SCA fighting ACL helmets need replacing every once and a while. Steady work, ;)

Edward
Sir Edward Lindey, Knight of the Drawn Sword. ACL/BotN 2012

Saint Hubert's Rangers

Men of steel, in suits of iron forged legends of valour untarnished by time.

Argent, a boar statant and on a chief gules an arrow Or
Caius705
Archive Member
Posts: 2449
Joined: Wed Aug 01, 2012 4:42 pm
Location: Barony of Bordermarch, Ansteorra

Re: Hjalmarhiem Armoury -back from the dead!

Post by Caius705 »

Or for that matter, 4130 is quit cheap and welds easily with a good stick welder and the right rods (or TIG, I think) and then just let the buyers worry about heat treating. Of course they wouldn't need replacing as often.
"This quote was enough reason on its own to join AA. Period."
-Scott Landua
hjalmr
Archive Member
Posts: 3387
Joined: Mon Dec 03, 2001 2:01 am
Location: Memphis, TN.
Contact:

Re: Hjalmarhiem Armoury -back from the dead!

Post by hjalmr »

Edward MacTavish wrote:how much would a sheet of 12ga stainless cost you? I believe that some of the ACL guys and my self would be intrested in buying helmets in that guage. I would really like a kettle helm in the 12ga stainless. Let me know and I will see if I can get some guys to buy helmets. Also unlike SCA fighting ACL helmets need replacing every once and a while. Steady work, ;)

Edward

I will ask tomorrow. my last sheet of 14g was a tad over $300 (4 x 10).
Hjalmar of Sognefjord
Squire to Duke Sir John The Bearkiller
Barony of Grey Niche, Kingdom of Glean Ahbann.

"True nobility is not measured by being superior to another, but rather by becoming superior to oneself."
Post Reply