This photo is just to show the style of spaulders, they will NOT be finished pieces as in the photo, and brass trim pieces are $15 extra if you want them.
This is what raw heat treated pieces looks like:
Heat Treated 4130 Spaulder Kits *SOLD*
-
Craig Nadler
- Archive Member
- Posts: 870
- Joined: Sat May 17, 2003 1:01 am
- Location: Nashua, New Hampshire, USA
- Contact:
Heat Treated 4130 Spaulder Kits *SOLD*
Would anyone be interested in heat treated 0.032"/22ga. or 0.040"/19ga. 4130 spaulder kits. These would be unfinished pieces that are just shaped and heat treated. I'll include leather straps, buckles, rivets, and brass strips to cut up into washers.
This photo is just to show the style of spaulders, they will NOT be finished pieces as in the photo, and brass trim pieces are $15 extra if you want them.
This is what raw heat treated pieces looks like:
This photo is just to show the style of spaulders, they will NOT be finished pieces as in the photo, and brass trim pieces are $15 extra if you want them.
This is what raw heat treated pieces looks like:
Last edited by Craig Nadler on Thu Jan 23, 2014 4:47 pm, edited 1 time in total.
-
Craig Nadler
- Archive Member
- Posts: 870
- Joined: Sat May 17, 2003 1:01 am
- Location: Nashua, New Hampshire, USA
- Contact:
Re: Heat Treated 4130 Spaulder Kits $75
Would a basic 60 grit Formax finish for $95 a set be more interesting to people?
Re: Heat Treated 4130 Spaulder Kits $75
I would be interested in an unfinished set.
SCA Payn D'Spencer Of Warboys. Barony of Madrone. Giving hope to the squires of AnTir.
MKA Ted Zimmers
French Warfare... A knife fight followed by a track meet
MKA Ted Zimmers
French Warfare... A knife fight followed by a track meet
-
Craig Nadler
- Archive Member
- Posts: 870
- Joined: Sat May 17, 2003 1:01 am
- Location: Nashua, New Hampshire, USA
- Contact:
Re: Heat Treated 4130 Spaulder Kits $75
Payn,
A USPS Medium Flat Rate Box with insurance is $13.75. You can Paypal me $88.75 to craig@nadler.us and I'll get them out next week. What thickness did you want 0.032"/22ga. or 0.040"/19ga.?
A USPS Medium Flat Rate Box with insurance is $13.75. You can Paypal me $88.75 to craig@nadler.us and I'll get them out next week. What thickness did you want 0.032"/22ga. or 0.040"/19ga.?
Re: Heat Treated 4130 Spaulder Kits $75
I too would be interested in a set
-
Craig Nadler
- Archive Member
- Posts: 870
- Joined: Sat May 17, 2003 1:01 am
- Location: Nashua, New Hampshire, USA
- Contact:
Re: Heat Treated 4130 Spaulder Kits $75
I'm going to assume that people want 0.032"/22ga. plate sets if you don't say differently.
delder:
Go ahead and Paypal me the money. I'll make all the plate sets as a batch in a couple of days.
delder:
Go ahead and Paypal me the money. I'll make all the plate sets as a batch in a couple of days.
-
Craig Nadler
- Archive Member
- Posts: 870
- Joined: Sat May 17, 2003 1:01 am
- Location: Nashua, New Hampshire, USA
- Contact:
Re: Heat Treated 4130 Spaulder Kits $75
I have two 0.032" 4130 spaulder plate sets done. They have been heat treated to 1600F then water quenched and tempered to 500F for 30 minutes. If you want them as raw unfinished plates in a kit (without brass trim) then the price is $75 per kit.
I'll also have a 17-7ph stainless steel spaulder plate set done in a day or two. They will be heat treated to a TH1050 condition. If you want them as raw unfinished plates in a kit (without brass trim) then the price is $125 per kit.
Extras:
+$15 for brass trim pieces
+$15 for a 60 grid formax finish
+$30 for a blackened finish (60 grid formax finish then blackened)
+$95 for a high polish
I'll also have a 17-7ph stainless steel spaulder plate set done in a day or two. They will be heat treated to a TH1050 condition. If you want them as raw unfinished plates in a kit (without brass trim) then the price is $125 per kit.
Extras:
+$15 for brass trim pieces
+$15 for a 60 grid formax finish
+$30 for a blackened finish (60 grid formax finish then blackened)
+$95 for a high polish
-
Craig Nadler
- Archive Member
- Posts: 870
- Joined: Sat May 17, 2003 1:01 am
- Location: Nashua, New Hampshire, USA
- Contact:
Re: Heat Treated 4130 Spaulder Kits $75
I have one blackened 0.032" 4130 spaulder kit for $95 + shipping.
-
Craig Nadler
- Archive Member
- Posts: 870
- Joined: Sat May 17, 2003 1:01 am
- Location: Nashua, New Hampshire, USA
- Contact:
Re: Heat Treated 4130 Spaulder Kits $75
I have one 0.035" 17-7ph stainless steel spaulder kit for $95 + shipping. Please note that this specific kit was made by someone else as a test piece for them to try out working the material. I heat treated the pieces and put a brush finish on them. The finish still has a few tool marks and is not suitable for farther polishing. All spaulder kits include leather straps, buckles, rivets, and brass strips to cut up into washers.
-
Craig Nadler
- Archive Member
- Posts: 870
- Joined: Sat May 17, 2003 1:01 am
- Location: Nashua, New Hampshire, USA
- Contact:
Re: Heat Treated 4130 Spaulder Kits $75
The 17-7ph stainless steel and one of the blackened 4130 spaulder kits are sold.
There is still one 0.032" blackened 4130 spaulder kit available.
There is still one 0.032" blackened 4130 spaulder kit available.
-
Craig Nadler
- Archive Member
- Posts: 870
- Joined: Sat May 17, 2003 1:01 am
- Location: Nashua, New Hampshire, USA
- Contact:
Re: Heat Treated 4130 Spaulder Kits $75
I have one blackened 0.032" 4130 spaulder kit for $95 + shipping.
-
Craig Nadler
- Archive Member
- Posts: 870
- Joined: Sat May 17, 2003 1:01 am
- Location: Nashua, New Hampshire, USA
- Contact:
-
Craig Nadler
- Archive Member
- Posts: 870
- Joined: Sat May 17, 2003 1:01 am
- Location: Nashua, New Hampshire, USA
- Contact:
Re: Heat Treated 4130 Spaulder Kits $75
*SOLD*
I still have one blackened 0.032" 4130 spaulder kit for sale. The price has been reduced to $75 + shipping. Please note that this is a closeout sale, so I will not be making any more 4130 kits. The plates have been heat treated to a Rc48 hardness and should resist denting as well as 13ga./0.090" mild steel. Spaulder kits include leather straps, buckles, rivets, and brass strips to cut up into washers.
*SOLD*
*SOLD*
I still have one blackened 0.032" 4130 spaulder kit for sale. The price has been reduced to $75 + shipping. Please note that this is a closeout sale, so I will not be making any more 4130 kits. The plates have been heat treated to a Rc48 hardness and should resist denting as well as 13ga./0.090" mild steel. Spaulder kits include leather straps, buckles, rivets, and brass strips to cut up into washers.
*SOLD*
*SOLD*