Perforated steel

Hob · Post by **Hob** » Thu May 31, 2001 12:29 pm

I've received the happy news that the first rapier helms mass order has shown up in texas and is going to be shipped out in the next couple of days. Of course, this means I need to get cracking on finding the perforated steel for the faceplate. There was a post on here a few months ago about the thickness/hole-size/offset that others had used in the past. Could whoever posted that info repost it?

Here's the helms: http://members.home.net/agormanshaw/

Guy Dawkins · Post by **Guy Dawkins** » Thu May 31, 2001 12:38 pm

This is from th SCA Corp rapier rules:

"C. Rigid Material: puncture-resistant material that will not significantly flex, spread apart, or deform under pressure of 12 Kg applied by a standard mask tester, repeatedly to any single point. Examples of rigid material are:
* 22 gauge stainless steel (0.8 mm)
* 20 gauge mild steel (1.0 mm)
* 16 gauge aluminum, copper, or brass (1.6 mm)
* one layer of heavy leather (8 ounce, 4 mm)

ii. The face must be covered by either 12 kilogram mesh (e.g, a standard fencing mask) or perforated metal. Such metal must not have holes larger than 1/8" (3 mm) in diameter, with a minimum offset of 3/16" (5 mm) and shall also meet the definition of rigid material."

Hope that helps!

LOGOS just got a piece. Maybe he'll post where he got his from.

------------------
Guy
(mka: David Valenta )

[This message has been edited by Guy Dawkins (edited 05-31-2001).]

Derian le Breton · Post by **Derian le Breton** » Thu May 31, 2001 1:05 pm

Keep in mind that individual kingdom laws are likely to be more restrictive than the CORPORA. I am unsure about rapier rules, since I am not a rapier fighter, but if the armour standards for heavy fighting are any indication...

Even the small differences are important when you're getting inspected

-Donasian.

Kevin the Hound · Post by **Kevin the Hound** » Thu May 31, 2001 6:58 pm

-Ahem-
Go to www.mcmaster.com

type into the search box 9255T631 and hit return. It is the sheet metal that meets the standard listed by the Corporate rules for perforated steel.
Alternately, you could search under "perforated steel sheet" (with no quotes) to see more options.

Price is $37.55 for a 36" x 40" sheet of 16 ga with 1/8" holes of the appropriate spacing.

for stainless steel:

9358T141 (which is twice the price)

These come in 3 foot by 40 inch sheets. They do take credit cards.

Kevin the Hound

------------------
Pars Acuta in Alio (The Pointy End Goes into the Other Man)

jgalak · Post by **jgalak** » Fri Jun 01, 2001 8:10 am

Are there still helms available? Which ones? Do you know the price precisely yet? What gauge are they? Which halms can be equipped with a pierced plate?

Thanks,

------------------
--
Yehuda ben Moshe
mka Juliean Galak

Hob · Post by **Hob** » Fri Jun 01, 2001 5:18 pm

Thanks Kevin, that's perfect.

Jgalak, this isn't quite what you seem to think it is. Nothing is in stock, but there will probably be a second mass order going out later. For the details on the mass order, look at http://www.geocities.com/cadetem/