Anybody have plans for a foldable armouring stand?

Rainald · Post by **Rainald** » Fri Sep 10, 2004 4:38 pm

Like the title says, looking for plans for foldable, storage friendly armour stands.

Thomas H · Post by **Thomas H** » Fri Sep 10, 2004 6:05 pm

I have an old SCA design from somewhere on the net. the original writing was crap so i filled in what i thought it said :roll:

. it is pretty close i think but i haven't built it yet. i'll mail it to anyone who wants it.

Rainald · Post by **Rainald** » Fri Sep 10, 2004 9:40 pm

Got it, thanks Thomas, owe you one.

morristh · Post by **morristh** » Fri Sep 10, 2004 9:44 pm

I built one like 18 years ago. It was made of 2x4s and a lot of 2 inch hinges. If interested holler at me and Ill at least describe it.

Tim

Mac Thamhais · Post by **Mac Thamhais** » Sat Sep 11, 2004 6:28 pm

Thomas James Hayman wrote:I have an old SCA design from somewhere on the net. the original writing was crap so i filled in what i thought it said . it is pretty close i think but i haven't built it yet. i'll mail it to anyone who wants it.

I'd like a copy please.

shadowknight · Post by **shadowknight** » Sat Sep 11, 2004 7:09 pm

Thomas,
I'd be interested in the pattern, also.
Thanks,
Cliff Matthews

Galileo · Post by **Galileo** » Sat Sep 11, 2004 10:04 pm

Thomas, I'd like to see the plans as well.

S--

Thomas H · Post by **Thomas H** » Sun Sep 12, 2004 5:05 am

Mac Thamhais
i need your e-mail address to send you the file.

Zerker · Post by **Zerker** » Sun Sep 12, 2004 6:08 am

can i please also get a copy of the plans.

douglas_waugh@yahoo.co.nz

Zerker

Mac Thamhais · Post by **Mac Thamhais** » Sun Sep 12, 2004 8:11 am

its in my sig, just put a @ where the (AT) is.

morristh · Post by **morristh** » Sun Sep 12, 2004 8:40 am

Thomas, shoot me a copy too. I still have my old 2x4 on--I found it last night and I want to compare.

Tim

morristh@aol.com

Ethilrist · Post by **Ethilrist** » Mon Sep 13, 2004 8:25 am

If you check with your local SCA packrat, you might find what you're looking for here:

A Barbarian Armor Stand Timoch of Nordhem Tournaments Illuminated Spr 90 (#94)

As described above, a bunch of 2x4's, none over 3' long, a bunch of hinges (one with a removable pin. Folds down to a lump about 3' x1' by 4".

morristh · Post by **morristh** » Mon Sep 13, 2004 8:33 am

Yep, thats it

Tim

Sigeric · Post by **Sigeric** » Mon Sep 13, 2004 12:04 pm

Here's a picture of a very simple and portable stand.

Stand picture in .pdf format (approx. 1.1 meg)
<a href="http://home.armourarchive.org/members/sigeric/Stand.pdf">Click here</a>

(these are not my pictures, but I have made a couple of them)

Iain (Bunny) Ruadh · Post by **Iain (Bunny) Ruadh** » Mon Sep 13, 2004 5:51 pm

Is this was you were looking for?

[img]http://home.armourarchive.org/members/iain/ebayarmourstand.JPG[/img]

Iain (Bunny) Ruadh · Post by **Iain (Bunny) Ruadh** » Mon Sep 13, 2004 5:57 pm

This is the stand closed ...

[img]http://home.armourarchive.org/members/iain/closedstandnbox.JPG[/img]

jkelsch · Post by **jkelsch** » Tue Sep 14, 2004 8:59 am

I'd like a copy of the design.

If you could please send a copy to jkelsch@hotmail.com

Thanks,
Jason Kelsch

James of York · Post by **James of York** » Tue Sep 14, 2004 3:59 pm

Iain, I would like for a copy too, (bchboy1206@aol.com) but since you probably will be getting more requests it may just be easier to list the lengths of the 2x 4's and I am sure we could figure it out from there.

"Body" pole-length:

"Shoulder" poles-length:

"waist" poles-length:

"Waist Joint" poles-length:

"legs" pole-length:

"base poles"-length:

I really appreciate it.

Thomas H · Post by **Thomas H** » Tue Sep 14, 2004 4:13 pm

I could just send you the plans with the measurements on.