Review of conical helm from White Mountain Armory

This forum is designed to help us spread the knowledge of armouring.
Post Reply
User avatar
Gundo
Archive Member
Posts: 5309
Joined: Thu Aug 10, 2000 1:01 am
Location: Otter River MA, USA
Contact:

Review of conical helm from White Mountain Armory

Post by Gundo »

Editors: If you want to use this, feel free...if not, that won't bother me, either.

This regards the helm sent to Matt Broadway for review...I had it in my custody for a while, because it was shipped to me; Matt's address was in flux at the time. I took a very thorough look at the helm, of course, but I didn't post a review, because Matt was supposed to. Well, Matt may still do that, but he hasn't been around, so here goes...

Appearance and finish:
The helm in question is a Norman conical with nasal. It's authentic in style [no skirt and grille] so you can't fight SCA in it, but it would be a relatively easy armoring job to add those parts if you wanted to use it as a basis for a fighting helm. It looks exactly as pictured on the WMA site, and to my eye is a very close match to the helm pictured in AAMK. It came with a very nice polish, enough so that some people would assume it was stainless at first glance. The inside surface is painted.

Construction and quality:
Made of three pieces of 14ga steel [two halves, and the nasal]. Welded center seam, and the nasal is riveted on. The weld is very nicely migged. I found one tiny pit where the seam was ground down on the outside. The rivets were peened down very well. Completely tight, with no sharp edges.

Overall:
Very nice, in fact nearly flawless work. If I were purchasing armor, WMA would be one of the very first places I would check.

------------------
<B>Gundobad, Wise Ogre Armory
Wise Ogre Pic of the Day</B>

It is not because things are difficult, that we do not dare. It is because we do not dare, that they are difficult. --Seneca

A position worth taking, is worth defending.

[This message has been edited by Gundo (edited 09-30-2000).]
Drake Orion
Archive Member
Posts: 1521
Joined: Thu Aug 10, 2000 1:01 am
Location: Warminster, Pa.
Contact:

Post by Drake Orion »

I am glad to hear that from you Gundo...I ordered a pair of those 3 piece elbows that he had posted a few months back. I am waiting for the to arrive. Once they do I will be happy to post a review.
Joe Skeesick
Archive Member
Posts: 1591
Joined: Thu Aug 10, 2000 1:01 am
Location: Suffolk, UK

Post by Joe Skeesick »

Can't get a much better review than that, especially from a fellow armourer.


I know I've been happy with everything I've gotten from WMA.


Janos
User avatar
white mountain armoury
Archive Member
Posts: 10538
Joined: Sun Aug 20, 2000 1:01 am
Location: the Taiga

Post by white mountain armoury »

thanks for the kind words
Post Reply