Auction Time saver

Tatsuo Okami · Post by **Tatsuo Okami** » Thu Mar 13, 2008 5:06 pm

Doing some spring cleaning to offset Spring Broke (hopefully) in time for Spring Break.
Since I am BROKE and on a schedule.. we are going to try and slipstream the auction process. I am going to run pix of everything I have for sale or auction and those Items, people tell me they are interested in, WILL go up for auction in their own Thread. Stuff I have already tried to sell will be shown at the bottom (to give me time to find the pix) or noted as to its location on my web page.

Opinions and querys MORE Than welcome.

The Pig face is 16Ga SS Raised eye slots and mouth are started. Made to fit a med Basc (of my pattern)

The vambs and greaves are oak tanned 12-15 OZ and the greaves will be dyed to match. fit a med Muscled individ. can be cut down to go with the Macedonian Lamallar shown further down

Randy W · Post by **Randy W** » Thu Mar 13, 2008 5:10 pm

PIGGY FACEPLATE?

Tatsuo Okami · Post by **Tatsuo Okami** » Thu Mar 13, 2008 5:17 pm

Helms, Zunari Kubota:
Mini SS (Just what you see) 8" X 6 3/4"
Med-L SS (W/ SCA skirt) 7 1/4" X 9 1/2"
Med MS (as shown) 7 1/4" X6 7/8"

Med-L SS was part of a full Harness I am working on. IT WILL ONLY be sold as a finished product.
Everything else is "As Is" or "As Finished"... Which leaves some Custom options open for those pieces being bought Completed.

Tatsuo Okami · Post by **Tatsuo Okami** » Thu Mar 13, 2008 5:20 pm

I shoulda Known Randy....

One note: you can either note your interest and wait for an auction or make an offer and (Maybe) beat everyone to it.

Tatsuo Okami · Post by **Tatsuo Okami** » Thu Mar 13, 2008 5:28 pm

The one in the back is a Main Guache gaurd for Rapier (Heavy{C&T) or Light). The two BIG ones are Ma-Dhu grip baskets. I have more Solid baskets and a couple other styles of Rod sword basket. I just have to find them.
Note: ALL of these Baskets pass the "Shall not allow a 1" rod to pass thru" SCA helm standard. IE legal in every kingdom in the Emperium.

Gregoire de Lyon · Post by **Gregoire de Lyon** » Thu Mar 13, 2008 6:09 pm

Interested in the pig visor.

Size? Material? Gauge? Picture from the front please?

Hoefish · Post by **Hoefish** » Thu Mar 13, 2008 6:27 pm

Yes, more information on the pig face please.

Tatsuo Okami · Post by **Tatsuo Okami** » Thu Mar 13, 2008 6:46 pm

Plz See above (Initial Post) for basic Pigface info

The Macedonian Lamallar is made for a petite person or a thin person who has an incredibly high waist. As far as a set for a petite fighter I also have my leather artic gaunts (In AA Aluminum) in SMALL ready to assemble.

I have 3 Large Brig Gorgets Avail and one XL L=19 Cir 2 Front Ht. XL= 21 cir 2 Front Ht

Tatsuo Okami · Post by **Tatsuo Okami** » Thu Mar 13, 2008 6:59 pm

As before
Large number of Various Shields.... Including the gothic one.
Only the Middle Bascinet is avail. the others have sold.

Tatsuo Okami · Post by **Tatsuo Okami** » Thu Mar 13, 2008 7:13 pm

And of course their is our ever dangerous Xbows.... 2 of them roughly 940-960 In/LBS.

I have another Lorica Kit As shown by Cingetorix for sale (Sold?). All the thoracic plates are already polished.

Tatsuo Okami · Post by **Tatsuo Okami** » Thu Mar 13, 2008 7:27 pm

You Cannot Resist

Sleepy

You Must Have

Sleepy

Ottoman TURKS!

Sofas SUCK

"I can Fight in the Rain".

"I can avoid All PAIN".

What ever it takes to keep this Project together. An Ottoman Turkish harness: Pot Lid body; conical spangen w/ slide artic lobster tail, Bazubands, knee cupping Greaves, gorget W/ attached Pauldrons, False Fingered leather artic Gaunts; and SCA knee and elbow cops.
Helm is Stainless, knee and elbows are planned as SS. everything else is 6061 .080 T-6 AA Aluminum.

Tatsuo Okami · Post by **Tatsuo Okami** » Thu Mar 13, 2008 7:34 pm

enough for now... we'll see what gets done this next week for the next round.

And now for an EGO stroke: What do you think of this? a Germandhu with "period" skirting. It paid for an after market head for my Dodge Rampage...
Please note:

This just for display Not for sale... the next one???/ Sure

Daithi' ua Conri' · Post by **Daithi' ua Conri'** » Thu Mar 13, 2008 7:46 pm

I would like to see the two sets of Gaunts as I might be interested.

Oswyn_de_Wulferton · Post by **Oswyn_de_Wulferton** » Thu Mar 13, 2008 8:07 pm

Tatsuo Okami wrote: You Cannot Resist
Sleepy You Must Have Sleepy
Ottoman TURKS! Sofas SUCK
"I can Fight in the Rain". "I can avoid All PAIN".

What ever it takes to keep this Project together. An Ottoman Turkish harness: Pot Lid body; conical spangen w/ slide artic lobster tail, Bazubands, knee cupping Greaves, gorget W/ attached Pauldrons, False Fingered leather artic Gaunts; and SCA knee and elbow cops.
Helm is Stainless, knee and elbows are planned as SS. everything else is 6061 .080 T-6 AA Aluminum.

Pictures of teh bazubands, greaves and false fingered gauntlets?

Uneg · Post by **Uneg** » Thu Mar 13, 2008 8:10 pm

I'm interested in a couple of those cup-hilts, if you have more than one.

Thanks!

Jonathon More · Post by **Jonathon More** » Thu Mar 13, 2008 8:17 pm

what? no back point bascinet with a pig snout? I'm dissapointed. (and am seriously in the market for same)

Lothar qui et Sigimund · Thu Mar 13, 2008 8:33 pm

Potential dibs on the turkish kit, pm me with details?
Thanks

matt9625 · Post by **matt9625** » Fri Mar 14, 2008 9:02 am

pm sent

AKAWilliamUlfer · Post by **AKAWilliamUlfer** » Fri Mar 14, 2008 10:01 pm

Pm sent

AKAWilliamUlfer · Post by **AKAWilliamUlfer** » Fri Mar 14, 2008 10:02 pm

Pm sent

Alec Gunnarsson · Post by **Alec Gunnarsson** » Fri Mar 14, 2008 11:08 pm

OOOh! OOOh! OOOh!
Zunari Kabuto... Will it fit my melon? (23 1/2" (7 1/2 hat size))... If so, how much?

Rasper77 · Post by **Rasper77** » Sat Mar 15, 2008 12:07 am

pm sent

Gethin · Post by **Gethin** » Sat Mar 15, 2008 2:03 am

I am interested in a large brig gorget.

CiaranohEildhe · Post by **CiaranohEildhe** » Sat Mar 15, 2008 10:37 am

PM sent.

Tatsuo Okami · Post by **Tatsuo Okami** » Mon Mar 17, 2008 9:49 am

a bump Because:

so far the Pig face, Sword baskets and Zunari have enough different people interested to Start those on auction.

Anything else???
OH PS thanx to all the folks that just "Bought it Now"

Tatsuo Okami · Post by **Tatsuo Okami** » Wed Mar 19, 2008 1:35 pm

Deleted all the PM's before I could check to see what else was most interested in as an auction item. If you had a piece you wanted to see auctioned... PLEASE RE-send your preference.

Screamin deal available on a Petite fighters Harness (This AND)

Tatsuo Okami · Post by **Tatsuo Okami** » Fri Mar 21, 2008 3:08 pm

Just checking to see if there were any other items people wanted to see up for auction.
Right now its: the pigface (1 Bidder); Sword Basket (next item up ), And the Mild Steel Zunari boshi (last Item.. so far).
Get in any suggestions now.......

Daithi' ua Conri' · Post by **Daithi' ua Conri'** » Fri Mar 21, 2008 3:11 pm

What would a start be like on the crossbows?

Oh and all the gaunts would probably move.

Tatsuo Okami · Post by **Tatsuo Okami** » Sat Mar 22, 2008 12:26 pm

Well IF I get enough interest to Auction them:.... Prob 50-60 for the Xbows

Only one pair of Gaunts is finished enough to sell. A SMALL pair of Alum W/ Lthr Artic.

However I am working on a run of Mild steel Mittens w/ hourglass style cuff.

Randy W · Post by **Randy W** » Sat Mar 22, 2008 1:15 pm

if you are doing the Xbows - I'll go $50 to start it

NotDukeOlaf2 · Post by **NotDukeOlaf2** » Sat Mar 22, 2008 7:16 pm

60 on the crossbow

Randy W · Post by **Randy W** » Sat Mar 22, 2008 7:30 pm

I think he has 2

NotDukeOlaf2 · Post by **NotDukeOlaf2** » Sat Mar 22, 2008 10:32 pm

wanna split them then 60 on each one randy?either way I am good for 60 on it

Randy W · Post by **Randy W** » Sat Mar 22, 2008 10:37 pm

I'd go for that, not sure he's decided to auction them yet

Daithi' ua Conri' · Post by **Daithi' ua Conri'** » Sun Mar 23, 2008 2:14 am

If you could put up pics of the Alum gaunts I have a small fighter in need and would front the money so that she could fight other forms like she wants. Let me know and also I am up for the Xbows as well so I would say auction those babies off.

Daithi'

Auction Time saver

Auction Time saver

More

Pigs of a blanket...

Guards

And

Gotta Haves

ARCHER!!!!!!

Dont buy this

Thats NOT All

Re: Dont buy this

pm

????

OOOps

Winding up

Xbows?