FS: Hounskull bascinet. NEW!!!

M.Suprovich · Post by **M.Suprovich** » Fri Aug 08, 2008 2:51 pm

A new Hounskull bascinet with aventaile for sale!
The top is made of 2.5 mm mild hot roll steel, visor of 2 mm mild hot roll steel. The kit goes in mirror polish, the helm has a liner and chin straps. The liner is sewn down to the helmet.

The helmet is made on a head 58-60 sm

The price is 300 Euro + shipping.

For order within 24 hours is supposed a discount!!!

Best regards.
Maxim Suprovich

M.Suprovich · Post by **M.Suprovich** » Fri Aug 08, 2008 2:52 pm

more pics...

Hagen · Post by **Hagen** » Fri Aug 08, 2008 3:32 pm

It this a legal SCA helm?

M.Suprovich · Post by **M.Suprovich** » Fri Aug 08, 2008 3:39 pm

Hagen wrote:It this a legal SCA helm?

yes, of course

Klaus the Red · Post by **Klaus the Red** » Fri Aug 08, 2008 6:17 pm

Not bad at all. The shape is quite nice. The "cheeks" of the visor are a good distance from the helmet so they cover the vervelles, which is often not done correctly. However, there shouldn't be so much of a gap between the top of the visor and the helmet forehead- think what would happen if someone came down from above with a war hammer or halberd backspike and caught that edge. The visor should form a continuous glancing surface with the helmet when closed- or is it not closed all the way?

Klaus

M.Suprovich · Post by **M.Suprovich** » Sat Aug 09, 2008 2:38 pm

The visor it is well adjust to the helmet. Man on a photo badly closed it...

An excellent helmet waits the new owner

Klaus the Red · Post by **Klaus the Red** » Sat Aug 09, 2008 10:51 pm

Yep, that's much better.

thomas penyngton · Post by **thomas penyngton** » Sun Aug 10, 2008 2:14 pm

PM sent.

thomas p

M.Suprovich · Post by **M.Suprovich** » Mon Aug 11, 2008 2:35 am

PM answer

M.Suprovich · Post by **M.Suprovich** » Tue Aug 12, 2008 1:45 pm

new price 260 Euro + shipping

bartholomew · Post by **bartholomew** » Thu Aug 14, 2008 10:17 am

I was curious if the helmet was still available. Also could you possibly make one in stainless steel? Can the helmet also be quoted less the aventail? I have a stainless rivited aventail here that would be nice for it? Thanks again.

M.Suprovich · Post by **M.Suprovich** » Mon Aug 18, 2008 4:55 pm

Wulfgar · Post by **Wulfgar** » Mon Aug 18, 2008 7:00 pm

Very nice, if I didn't already have a dead sexy bascinet I would be very tempted.

Bruhn Engbrecht · Post by **Bruhn Engbrecht** » Sat Aug 23, 2008 1:49 am

oh so very tempting lol, still a bit to big in the head tho

M.Suprovich · Post by **M.Suprovich** » Tue Aug 26, 2008 2:34 pm

bump....

d-farrell2 · Post by **d-farrell2** » Tue Aug 26, 2008 4:14 pm

tempting, but I like the satin polish, myself - I did forward this on to some folks who might be interested though.

Hope you get it sold!

M.Suprovich · Post by **M.Suprovich** » Tue Aug 26, 2008 5:09 pm

d-farrell2 wrote:tempting, but I like the satin polish, myself - I did forward this on to some folks who might be interested though.

Hope you get it sold!

regrind a helmet on a satin polish very simply

I can do if you will want to purchase a helmet

d-farrell2 · Post by **d-farrell2** » Tue Aug 26, 2008 5:17 pm

M.Suprovich wrote:
d-farrell2 wrote:tempting, but I like the satin polish, myself - I did forward this on to some folks who might be interested though.

Hope you get it sold!

regrind a helmet on a satin polish very simply I can do if you will want to purchase a helmet

Well, I also just commissioned a helmet.. but it still is tempting

M.Suprovich · Post by **M.Suprovich** » Fri Aug 29, 2008 4:59 am

d-farrell2 wrote:
M.Suprovich wrote:
d-farrell2 wrote:tempting, but I like the satin polish, myself - I did forward this on to some folks who might be interested though.

Hope you get it sold!

regrind a helmet on a satin polish very simply I can do if you will want to purchase a helmet

Well, I also just commissioned a helmet.. but it still is tempting

I do not intrude upon, but suppose that your bacinet not from 12 ga?

M.Suprovich · Post by **M.Suprovich** » Tue Sep 09, 2008 4:12 pm

Tancred de Lanvellec · Tue Sep 09, 2008 5:26 pm

PM sent

M.Suprovich · Post by **M.Suprovich** » Thu Sep 18, 2008 1:43 pm

new price 240 Euro + shipping....

alemen · Post by **alemen** » Thu Sep 18, 2008 4:34 pm

What would shipping be (approximately) to the West Coast of the US?

M.Suprovich · Post by **M.Suprovich** » Fri Sep 19, 2008 1:00 am

alemen wrote:What would shipping be (approximately) to the West Coast of the US?

about 60$

Tarquin Bjornsson · Post by **Tarquin Bjornsson** » Fri Sep 19, 2008 6:27 am

is the aventail riveted or butted?

how wide are the eyeslots?

alemen · Post by **alemen** » Fri Sep 19, 2008 10:53 am

If you'll take 220 Eu ($317 US) + shipping, I'll but it.

FS: Hounskull bascinet. NEW!!!

FS: Hounskull bascinet. NEW!!!

Question

Re: Question

helmet for sale

Interested

Re: Interested

Interested