FS: Shamrock Armoury Klapvisor SOLD SOLD SOLD

cbx mike · Post by **cbx mike** » Wed Aug 27, 2008 2:22 pm

Hi All,

Well the title says it all. I have for sale a Shamrock Armoury Klapvisor, that i ordered about a month ago. it was the one from thier instock page. it arrived today and well I can not even get it on my head. here is a link to the pictures.

http://www.shamrockarmoury.com/Klapvisor.html

Jackie did some great work to this helm such as installing 16 brass vervelles and drilling for a sewn in liner. i do not have a digital camera so i
can not get any pictures right now. maybe Jackie will chime in to say how nice this helm is. you will also get a Steel Mastery historical liner with this helm. you will have to install it. So if interested let me know. i may be able to email some pictures if i can get my friend to take them.Asking $400.00 shipped i will take paypal(plus 3%) & USPS money order

yours truely

CBX Mike

Payn · Post by **Payn** » Wed Aug 27, 2008 2:51 pm

how big is your melon?

Murdock · Post by **Murdock** » Wed Aug 27, 2008 3:00 pm

Who runs Shamrock?

That looks like what Jackie in Tn was doing before i left, but a little cleaner. Kinda looks like Caleb Hogg or Sir Brian had some influence on a couple pieces.

If it's Jackie he's getting good.

Murdock · Post by **Murdock** » Wed Aug 27, 2008 3:01 pm

never mind it is Jackie

I went to the home page and actually read

Jackie's doing nice work

cbx mike · Post by **cbx mike** » Wed Aug 27, 2008 4:15 pm

banzaimf wrote:how big is your melon?

my melon is 24.5 as best i have measured.

CBX mike

shamrockarmoury · Post by **shamrockarmoury** » Wed Aug 27, 2008 6:13 pm

Murdock wrote:never mind it is Jackie

I went to the home page and actually read

Jackie's doing nice work

Murdock you are a dork :twisted:

shamrockarmoury · Post by **shamrockarmoury** » Wed Aug 27, 2008 6:17 pm

This is a sweet helm and deal.. I came close to doing a full kit for it and keeping it

Tarquin Bjornsson · Post by **Tarquin Bjornsson** » Thu Aug 28, 2008 4:07 pm

how wide are the eyeslots? i need somthing for jousting so 3/8 or smaller

cbx mike · Post by **cbx mike** » Thu Aug 28, 2008 5:34 pm

Tarquin Bjornsson wrote:how wide are the eyeslots? i need somthing for jousting so 3/8 or smaller

Eye slots are 1/2 inch.

CBX Mike

shamrockarmoury · Post by **shamrockarmoury** » Thu Aug 28, 2008 6:51 pm

Tarquin Bjornsson wrote:how wide are the eyeslots? i need somthing for jousting so 3/8 or smaller

If you want the helm I will make a new visor on a trade for the old one for it! You could have Mike send it to me for the new fit! But you would have to cover shipping from here.

I would like to help Mike out on this it really sucks that it want fit him

Let me know what you think

Jackie

Tarquin Bjornsson · Post by **Tarquin Bjornsson** » Thu Aug 28, 2008 8:33 pm

hmmi am tempted, let me think on it a couple days

shamrockarmoury · Post by **shamrockarmoury** » Fri Aug 29, 2008 7:43 am

Sounds good

cbx mike · Post by **cbx mike** » Mon Sep 01, 2008 5:17 pm

Bump to the top.

Tarquin Bjornsson · Post by **Tarquin Bjornsson** » Mon Sep 01, 2008 9:10 pm

the more i look i look at it, i am not a fan of the lack of actual point on the skull (prefer and a fairly sharp point), sorry i have to back out

Though i absolutly love the shaping on the visor though and i see very few that i like.

Ewen MacSuibhne · Post by **Ewen MacSuibhne** » Mon Sep 01, 2008 10:35 pm

Could you get better sizing info? I have a 23 inch head, but I don't want to be swimming in it

Tuomas · Post by **Tuomas** » Thu Sep 04, 2008 10:57 am

What guage is the helm, and is it stainless or mild? If it is stainless I am very interested.

cbx mike · Post by **cbx mike** » Thu Sep 04, 2008 11:21 am

Toumas

i believe it is 14 gauge and mild.

shamrockarmoury · Post by **shamrockarmoury** » Thu Sep 04, 2008 4:25 pm

Ewen MacSuibhne wrote:Could you get better sizing info? I have a 23 inch head, but I don't want to be swimming in it

I have a 23 inch head and it would fit me so sweaty by SCA standers

It is 14 gauge Mild

Hope that helps

Jackie

cbx mike · Post by **cbx mike** » Sat Sep 06, 2008 10:36 am

bump back up

cbx mike · Post by **cbx mike** » Thu Nov 19, 2009 9:14 am

WOW its been a while. but lets bump this one back to the top.

it is still available and cones with a Steel mastery liner(needs to be sewn in.

350.00 shipping included.

(PAYPAL +3 %)

cbx mike · Post by **cbx mike** » Sat Nov 21, 2009 7:04 pm

was sold now its not.

Mike

cbx mike · Post by **cbx mike** » Wed Dec 02, 2009 8:34 am

Well i guess the buyer bailed. he has not resopnded to PM or email. i do hope nothing bad happened.

however that means the helm is now back up for sale. thank you for looking.

cbx mike · Post by **cbx mike** » Fri Dec 04, 2009 5:09 pm

Just recievied notice. the guy has renegged on the purchase. so it is back up for sale.

Mike

Adhemar de Chartres · Post by **Adhemar de Chartres** » Fri Dec 04, 2009 5:35 pm

Dibs pending speaking with my financial adviser when I get home.

cbx mike · Post by **cbx mike** » Fri Dec 04, 2009 6:50 pm

I await your response Adhemar.

Adhemar de Chartres wrote:Dibs pending speaking with my financial adviser when I get home.

cbx mike · Post by **cbx mike** » Sun Dec 06, 2009 3:37 pm

Adhemar de Chartres · Post by **Adhemar de Chartres** » Mon Dec 07, 2009 9:59 am

Mt stove shot craps on Friday night, my armour fund has been spent on a new Maytag...yay me *sighs*. Sorry man...

sha-ul · Post by **sha-ul** » Tue Dec 08, 2009 12:11 am

Adhemar de Chartres wrote:Mt stove shot craps on Friday night, my armour fund has been spent on a new Maytag...yay me *sighs*. Sorry man...

my condolences on your loss, however you now have some enameled steel for brigandines :twisted:

Pitbull Armory · Post by **Pitbull Armory** » Tue Dec 08, 2009 1:35 am

Hi there, Rofl Sha-ul, Damn that is a sweet helm Great work Shamrock.

Take care

Pitbull

cbx mike · Post by **cbx mike** » Wed Dec 09, 2009 12:18 pm

how about back on top

cbx mike · Post by **cbx mike** » Thu Dec 10, 2009 6:44 pm

cbx mike · Post by **cbx mike** » Sun Dec 13, 2009 1:18 pm

lets get it back into the spot light.

Mike

cbx mike · Post by **cbx mike** » Sun Dec 27, 2009 12:20 pm

bump back to the top

talaananthes · Post by **talaananthes** » Sun Dec 27, 2009 1:06 pm

Is the klappvisor permanently riveted in place, or is it removable? What type of steel, and what gauge?

Oh, and what is the brow measurement of the helm? What size head do you think this WOULD fit?

cbx mike · Post by **cbx mike** » Sun Dec 27, 2009 2:22 pm

The visor is removable. as to the rest of your questions they have all been pretty much answered in other posts in this thread.

Mike

talaananthes wrote:Is the klappvisor permanently riveted in place, or is it removable? What type of steel, and what gauge?

Oh, and what is the brow measurement of the helm? What size head do you think this WOULD fit?