Looking for information on this CoP

This forum is designed to help us spread the knowledge of armouring.
Post Reply
User avatar
Thaddeus
Archive Member
Posts: 1714
Joined: Mon Sep 04, 2000 1:01 am
Location: North side of the Lonely Mountain.
Contact:

Looking for information on this CoP

Post by Thaddeus »

I am looking for any articles or information on this find.
I seem to recall something about it being dug up by a non archeologist. Perhaps that is incorrect.
In particular I am interested to know if anyone has done any recreations of this rig and what they turned out looking like.

Thanks all.
Attachments
59656.jpg
59656.jpg (61.83 KiB) Viewed 589 times
Thaddeus von Orlamunde
Flying Pig Forge
Mac wrote: It helps to have the right tools and the right beard.
Mac
integral arms
Archive Member
Posts: 127
Joined: Wed Aug 06, 2008 11:22 am
Location: livermore, ca SCA shire of Esfenn

Post by integral arms »

this is a pic I have saved of an interpretation of this style of COP. its what my newbie fighter is having me make for her, in addition to the work discussed in the "Scale Gauntlets" thread. as you can see the artist has the pectoral plate outside of the fabric.

Image

anyone know why my image didnt work?
Last edited by integral arms on Fri Oct 24, 2008 2:03 pm, edited 1 time in total.
I'm Armand D'Hever, and I approve this message.
User avatar
white mountain armoury
Archive Member
Posts: 10538
Joined: Sun Aug 20, 2000 1:01 am
Location: the Taiga

Post by white mountain armoury »

Thats what I hope to be in for pennsic.
Dont have any info to offer you. I
ts new enough where reconstructions are likley rare.
I prefer kittens
User avatar
marcus the pale
Archive Member
Posts: 662
Joined: Sat Jan 05, 2008 12:39 am
Location: Indy
Contact:

Post by marcus the pale »

integral arms wrote:this is a pic I have saved of an interpretation of this style of COP. its what my newbie fighter is having me make for her, in addition to the work discussed in the "Scale Gauntlets" thread. as you can see the artist has the pectoral plate outside of the fabric.

Image



Ive always wondered how that COP would fare in an SCA setting, seems like that upper chest plate would restrict arm movement. But then, I R NOOB. :wink:


marcus
"Have you forgotten that it is in the furnace that gold in refined, increasing in value the more it is beaten and fashioned into different shapes?" -Christine de Pizan
AL
Archive Member
Posts: 1978
Joined: Wed Apr 16, 2008 8:16 am
Location: East Rottenchester
Contact:

Post by AL »

This piece was auctioned off at Czerniacs or Hermanns Historica a few years back.
User avatar
bairdec
Archive Member
Posts: 885
Joined: Wed Dec 13, 2006 2:36 pm
Location: Tucson, AZ
Contact:

Post by bairdec »

integral arms wrote:
Image

anyone know why my image didnt work?


'Cause you left "?v=0" at the end of the link. The link needs to end in an image format; i.e .jpg, .bmp, .png, or .gif. If you get a site that adds .dll to the middle of the url, you'll need to get the image isolated so that isn't part of the link.

What is this image from? It looks like an Osprey illustration. I'm thinking the guy looks like a Hungarian because of the shield.
Image
Sometimes you have fun, and sometimes the fun has you. -Sgt. Schlock
User avatar
InsaneIrish
SQUEEE!
Posts: 18252
Joined: Thu Aug 10, 2000 1:01 am
Location: Jefferson City Mo. USA

Post by InsaneIrish »

bairdec wrote:
integral arms wrote:
Image

anyone know why my image didnt work?


'Cause you left "?v=0" at the end of the link. The link needs to end in an image format; i.e .jpg, .bmp, .png, or .gif. If you get a site that adds .dll to the middle of the url, you'll need to get the image isolated so that isn't part of the link.

What is this image from? It looks like an Osprey illustration. I'm thinking the guy looks like a Hungarian because of the shield.
Image


Osprey book. Germany at war 1300-1500.

As to that rig? I think the illustration is a bit off. The single metal chest piece is to big in that pic. AND I don't think they would have cut a big hole in the outer layer to expose that breastplate.

If that single plate were shorter, stopping half way down the ribs I think it would work fine.
Insane Irish

Quote: "Nissan Maxima"
(on Pennsic) I know that movie. It is the 13th warrior. A bunch of guys in armour that doesn't match itself or anybody elses, go on a trip and argue and get drunk and get laid and then fight Tuchux.
User avatar
Thaddeus
Archive Member
Posts: 1714
Joined: Mon Sep 04, 2000 1:01 am
Location: North side of the Lonely Mountain.
Contact:

Post by Thaddeus »

The original which good ol Angus M based his Illo on.
[img]http://home.armourarchive.org/members/thaddeus/effigy/knight1_sm.jpg[/img]
Thaddeus von Orlamunde
Flying Pig Forge
Mac wrote: It helps to have the right tools and the right beard.
Mac
User avatar
white mountain armoury
Archive Member
Posts: 10538
Joined: Sun Aug 20, 2000 1:01 am
Location: the Taiga

Post by white mountain armoury »

Thats anotehr gem from Bamburgh Catherdral if I recollect.
Always been a fav as well.
I prefer kittens
michael stuart
Archive Member
Posts: 189
Joined: Sat Jan 05, 2008 7:45 pm
Location: Charlesbury Crossing

Post by michael stuart »

O my goodness, what are those chains for?

Image

Now you know the rest of the story...
Baron Alcyoneus
Archive Member
Posts: 39578
Joined: Tue Sep 23, 2008 7:00 pm

Post by Baron Alcyoneus »

InsaneIrish wrote:Osprey book. Germany at war 1300-1500.

As to that rig? I think the illustration is a bit off. The single metal chest piece is to big in that pic. AND I don't think they would have cut a big hole in the outer layer to expose that breastplate.


It reinforces the COP and goes on top, as the pic that Thaddeus gave us shows.
Vypadni z mého trávník!

Does loyalty trump truth?

"If they hurt you, hurt them back. If they kill you, walk it off."- Captain America
Kilkenny
Archive Member
Posts: 12021
Joined: Sun Oct 06, 2002 1:01 am
Location: NJ
Contact:

Post by Kilkenny »

white mountain armoury wrote:Thats anotehr gem from Bamburgh Catherdral if I recollect.
Always been a fav as well.


Proportions on that sculpture are insanely off. I wouldn't try to use it as anything more than a general guide to some stylistic elements. Of course, I am free to criticize, being a hamfisted wood carver :P

Seriously, I wouldn't try to take that relief as a guide for any proportions - the breastplate as shown would make a fine gift to someone I was going to be fighting against :twisted:
Gavin Kilkenny
Proprietor
Noble Lion Leather
hardened leather armour and sundry leather goods
www.noblelionleather.com
User avatar
white mountain armoury
Archive Member
Posts: 10538
Joined: Sun Aug 20, 2000 1:01 am
Location: the Taiga

Post by white mountain armoury »

Many of the proportions of german effigies and similar sculptures are off.
Still one could make a decent replica based of that piece.
Dont look at it as a breastplate but as a reinforcement to a cote of plates.
The heart shaped plate is not the sole defence, its simply a large central plate on a cote of plates affixed to the outside.
The top image I believe would have those plates on the inside of a textile covering.
The covering would have slits for the gaurd chains.
In certain art you will see liveries with crecent shaped cuts to allow the gaurd chains to pass through.
I prefer kittens
User avatar
Sean Powell
Archive Member
Posts: 9908
Joined: Sat Jul 13, 2002 1:01 am
Location: Holden MA

Post by Sean Powell »

Without a forensic analysis of the surface of the effigy looking for silver gilding vs paint I don't see any way to tell if the effigy is supposed to have a fabric coverd breastplate or not. The osprey illustration is one possible interpretation.

The extant one in the first post however shows large headed rivets on the outside, implying that it was probably fabric or leather covered.

Someone once questioned the authenticity of the museum pieces citing the conditions of the discovery. I think that if a forger was going to attempt to pass off a fake they would have assembled the chest rivets to the inside to match the common construction theory rather then choose a speculative all-fabric covered version. That in itself lends credence to it in my mind.

Sean

Edited for clarity
Last edited by Sean Powell on Sat Oct 25, 2008 7:23 pm, edited 1 time in total.
User avatar
white mountain armoury
Archive Member
Posts: 10538
Joined: Sun Aug 20, 2000 1:01 am
Location: the Taiga

Post by white mountain armoury »

Sean, are you talking about both pieces? or just about the carving?
I am simpluy making a guess in regards to both pieces.
I see the first image at the top of the page as a cop plates that would have been inside a textile of some type.
The carving as a cop with an exterior plate.
Again both guesses.
I prefer kittens
User avatar
Sean Powell
Archive Member
Posts: 9908
Joined: Sat Jul 13, 2002 1:01 am
Location: Holden MA

Post by Sean Powell »

white mountain armoury wrote:Sean, are you talking about both pieces? or just about the carving?
I am simpluy making a guess in regards to both pieces.
I see the first image at the top of the page as a cop plates that would have been inside a textile of some type.
The carving as a cop with an exterior plate.
Again both guesses.


Adam,

Sorry, wandering thoughts. I was talking about the carving that was the inspiration for the Osprey book in the first paragraph and the actual museum piece in the second. I'll go back and edit it to be more clear.

Sean
User avatar
Kerry Pratt
Archive Member
Posts: 294
Joined: Sat Jan 05, 2008 11:07 am
Location: Wichita Falls, TX

Post by Kerry Pratt »

From the Hermann Historica Catalogue, Auction 52...
There website is at http://www.hermann-historica.com/

SCHUTZWAFFEN

Lot Nr.3641

A coat of plates

from Hirschstein Castle at Passau, circa 1350. Preserved fragments of a Gothic coat of plates, consisting of a breastplate with four attached weapon chains, 30 plates for the protection of the lower body sides and back as well as one shoulder plate. Cleaned, perfectly conserved, excavation discovery.
The breastplate (28 x 24 cm, and 1.2 to 2 mm thick) is surrounded on the outside by thirteen flat-headed rivets for attaching it to a cloth support. In the middle of the plate, there are two of the original four ring loops with decorative iron rosettes for attaching the weapon chains. There are four weapon chains attached, two with completely preserved hooks with decorative notches. Each chain has an iron bar on the end. A star mark stamped into the reverse side.
The cambered plates are of different shapes, some still with preserved attachment rivets. There is also a fragment with a preserved bolt-shaped latch, and a heavily curved shoulder plate with an off-set rim.
Discovered in the ruins of Hirschstein Castle at Irsham, Passau District in Lower Bavaria. The fortress was in the possession of the Knight Zachreis Hader when it was destroyed in the 1367 - 1374 feud with Prince-Bishop Albert III of Passau. The pieces of armor were protected by a layer of ash in the interior of the main building. Comes with comprehensive documentation of the Hader family and Hirschstein Castle, along with photos of the pieces as they were found.
Extremely rare type of armor. Only a few, fragmentary pieces been found anywhere before now. In particular, the breastplate with the attached weapon chains had only been known from early illustrations and funerary monuments. The well-documented circumstances of the discovery are also extraordinary, allowing the piece to be placed in both time and space. This is certainly one of the most significant coat of plates remaining from the 14th century, and it will play a central role in future publications on the development of knightly protective body armour.
William Cameron de Blakstan
mka Kerry Pratt
User avatar
Thaddeus
Archive Member
Posts: 1714
Joined: Mon Sep 04, 2000 1:01 am
Location: North side of the Lonely Mountain.
Contact:

Post by Thaddeus »

Awesome thanks!
Thaddeus von Orlamunde
Flying Pig Forge
Mac wrote: It helps to have the right tools and the right beard.
Mac
Post Reply