Any interest in hand-woven/luceted sword lanyards?
Any interest in hand-woven/luceted sword lanyards?
Just checking interest. Could be made in any color requested, made of pearl cotton. Also, could be used as arming point ties, and look a heck of a lot better than parachute cord.
- Sean Powell
- Archive Member
- Posts: 9908
- Joined: Sat Jul 13, 2002 1:01 am
- Location: Holden MA
Yes I'm interested but it will be depending on price and design. I am doing a Rene de Anjou interpretation and the lanyards are clearly depicted in the illustrations. I would need 2. One to secure a sword to my gauntlet and another to hang a kolben from my curase.
Do you have any pictures you can show?
Thanks, Sean
Do you have any pictures you can show?
Thanks, Sean
- Sean Powell
- Archive Member
- Posts: 9908
- Joined: Sat Jul 13, 2002 1:01 am
- Location: Holden MA
Well I don't have good pictures unless I go home and scan the book tonight but here are some line drawings:
http://www.princeton.edu/~ezb/rene/mace.gif
http://www.princeton.edu/~ezb/rene/sword.gif
Quite simply it's a braided cord (probably blue, blue and white) with a spliced eye at one end (no knot visible) that is flexible enough to be turned inside out into a hang-man style knott but not so loose that it wants to slide open and let the sword out (hence why para-cord is a poor choice).
The other end (not shown in the sketches) appears tied in at least one illumination and ideally should TAPER down in diameter. I have no idea if that is even possible with hand woven cord.
I think they need to be about 24" long. I'll have to check some measurements when I get home tonight.
Sean
http://www.princeton.edu/~ezb/rene/mace.gif
http://www.princeton.edu/~ezb/rene/sword.gif
Quite simply it's a braided cord (probably blue, blue and white) with a spliced eye at one end (no knot visible) that is flexible enough to be turned inside out into a hang-man style knott but not so loose that it wants to slide open and let the sword out (hence why para-cord is a poor choice).
The other end (not shown in the sketches) appears tied in at least one illumination and ideally should TAPER down in diameter. I have no idea if that is even possible with hand woven cord.
I think they need to be about 24" long. I'll have to check some measurements when I get home tonight.
Sean
- Sean Powell
- Archive Member
- Posts: 9908
- Joined: Sat Jul 13, 2002 1:01 am
- Location: Holden MA
