Search
Search found 14 matches
- Sat May 09, 2009 5:56 am
- Forum: Armour - Design and Construction
- Topic: Maille tests - Early Results
- Replies: 27
- Views: 1622
I made a test like this three years ago and the result was more or less the same. I made the test with a machine from the University. The ring was more weak in the overlap zone, the rivet broke in two parts about 70 kgs ( 140 pound?). Two years later, I made another test with thicker rivet and the r...
- Tue Jan 20, 2009 5:16 pm
- Forum: Historical Research
- Topic: conquistadors & maille
- Replies: 28
- Views: 1186
- Sat Jan 17, 2009 2:24 pm
- Forum: Historical Research
- Topic: conquistadors & maille
- Replies: 28
- Views: 1186
I think the conquerors´mail probably was round section and round rivet. It was more usual in Spain becouse the muslim´s influence. Perhaps was you, Gordon. I put long time ago photos with the Gonzalo Jimenez de Quesada´s mail. It is in the National Museum of Colombia. It was made in Toledo around...
- Thu Nov 27, 2008 4:32 pm
- Forum: Historical Research
- Topic: A mail coif from Bulgaria
- Replies: 28
- Views: 3115
May be this coif was otoman, later than XV century. I don´t know a lot about it but I think so. -It is all riveted, very stranger before the XIV-XV Century. -Too it is a big wire and round section, more usual in muslim mail, I think. The German mail was usually less than 2 mm diameter. And after XI...
- Sat Nov 22, 2008 7:23 pm
- Forum: Historical Research
- Topic: A mail coif from Bulgaria
- Replies: 28
- Views: 3115
- Sun May 25, 2008 5:24 pm
- Forum: Armour - Design and Construction
- Topic: Mail replica with round section rings
- Replies: 13
- Views: 948
- Thu May 22, 2008 4:26 pm
- Forum: Armour - Design and Construction
- Topic: Mail replica with round section rings
- Replies: 13
- Views: 948
- Wed May 21, 2008 2:13 pm
- Forum: Armour - Design and Construction
- Topic: Mail replica with round section rings
- Replies: 13
- Views: 948
- Tue May 20, 2008 4:15 pm
- Forum: Armour - Design and Construction
- Topic: Mail replica with round section rings
- Replies: 13
- Views: 948
Hi, Signo. Really like we do riveted mail. - I coil the wire. - Cut the ring. -Make the overlap. -Hit for to get flat the overlap zone. -Heat fot to get very soft ring. -Now I clean the ring with acid because it is rust with scale and it is very dirty and hard and I need a very soft iron ( the overl...
- Tue May 20, 2008 1:22 am
- Forum: Armour - Design and Construction
- Topic: Mail replica with round section rings
- Replies: 13
- Views: 948
- Mon May 19, 2008 4:34 pm
- Forum: Armour - Design and Construction
- Topic: Mail replica with round section rings
- Replies: 13
- Views: 948
Mail replica with round section rings
Hi, mailmakers. A few months ago, I discussed with other mailmakers about the back of the rings and too because I didn´t hit the ring with a hammer when I am peening the rivet. Well, they were right. Now I had changed my tools and I hit strong the ring so I get a very nice ring, back and up. Here y...
- Mon Jan 28, 2008 6:11 pm
- Forum: Armour - Design and Construction
- Topic: Maille
- Replies: 54
- Views: 2591
I use pliers with the punch ( sometimes I punch too) or drift. Too I use drill bit HHS for hard steel. I sharpen the tip round or like a little screwdriver ( but with 0'7-0'8 mm width), according to round or wedge rivet. The overlap width is 1'8-2 mm before the punch. I´ll put photos with the tools...
- Thu Jan 24, 2008 2:58 pm
- Forum: Armour - Design and Construction
- Topic: Maille
- Replies: 54
- Views: 2591
- Wed Jan 23, 2008 6:06 pm
- Forum: Armour - Design and Construction
- Topic: Maille
- Replies: 54
- Views: 2591
Thanks, Boza. I was looking pictures from that mail from years. Do you know more ?
If you like the riveted mail, perhaps is a nice page the rivetedmaille group:
http://groups.yahoo.com/group/rivetedmaille/
Regards
Julio
If you like the riveted mail, perhaps is a nice page the rivetedmaille group:
http://groups.yahoo.com/group/rivetedmaille/
Regards
Julio