The Armour Archive

armsandarmor

Still available? Where are you located? How do you take payment? Lastly how much is shipping to USA 98662?

armsandarmor

A sterling transaction with Lloyd. Here is the sword/dagger along with my other MRL peices.

armsandarmor

Hi Lloyd, did the payment clear? Were you able to ship yet?

armsandarmor

Thanks for the additional info Lloyd, and i apologize for taking a while to get back to you. After much decision making I would like to purchase the dagger and sword, assuming they are still available. Please let me know how you accept payment and what the cheapest shipping option with either UPS or...

armsandarmor

Do you have a photo of the scabbard for the sword? Also who did the sharpening; is the edge still straight or does it "wobble"?

armsandarmor

Haha well if you decide to drop your price Glen, let me know. Paladin74, if you sell the sword by itself or as a package with the other sword and dagger I would be interested, maybe you can keep me in mind in case you decide to part with it.

armsandarmor

Hello, I am looking for a Windlass Steelcrafts Oakeshott Type XIV Arming Sword. Apparently I missed the boat and these are no longer in production. I would like to find one that has already been sharpened. If it is used that is ok, but no cracks or bends; it needs to be in functioning condition. Ple...

armsandarmor

i got some crappy gdfb ones for 75$ and bent them a little and they fit perfect. if i had the money for custom fitted idve gone that route.

armsandarmor

sword porn, as requested. the sword is aparently older than i thought, likely a koto blade. its too beat to be worth fixing up but its still a nice sword with historic value to me and i did get a good deal. i could always sell it or part it out and get something nicer. http://www.militaria.co.za/nmb...

armsandarmor

i signed up over on the nihonto msg brd so if i find out anything interesting ill repost here. thanks again for the info!

armsandarmor

im just interested in what the characters mean if anyone knows. but thanks for the info, ill get more photos and repost to the other sites.

armsandarmor

Hello, I recently purchased this samurai sword. I took it apart for light cleaning/preservation and photographed the signature. can anyone ID this? i was thinking if the sword deserves it to send it to a professional polisher. sorry i wasn't sure what thread to drop this into (research, design/const...

armsandarmor

its been a while since i last looked through this project; your talent has improved notably since my last visit! keep up the great work

armsandarmor

im interested in the tan pouch. i dont mind using paypal.

armsandarmor

thats very nice for apprentice work. good price too

armsandarmor

ill take the basegew if it hasnt sold yet. should go with the pauldrons i bought from you?

armsandarmor

how much for these?

armsandarmor

hello,

can you pm me with price on these arms and this helmet?

armsandarmor

pic of new helm on armour. this helm is not for this armour however; i have another Italian suit im almost done with so ill put the two next to each other. maybe someday a 3rd suit with a barbute...

armsandarmor

got my legs today, fast shipping! they shipped out a week or so ago?? also got my helmet its awesome!! couldnt have had a better job done for a better price! thanks and keep up the great work

armsandarmor

http://forums.armourarchive.org/phpBB3/viewtopic.php?f=3&t=149565 and i cant find Pitbulls shield thread but i have a shield by Pitbull and its pretty nice. its one of his larger kite shields. I just ordered a pavise from the above thread so i cant wait to see it. also i have a shield from Vitus but...

armsandarmor

are these legs still available?

23. Steel legs. Used.
Thickness 1,2 mm. Cold rolled steel.
Photos http://photo.qip.ru/users/aldwarf/200611052/206834686/
Price 200 USD + delivery

armsandarmor

koops from here on the forum is going to rough out the huge milanese left couter for me since i dont have a torch, so the left arm will be pending the couter. but ive got the elbow for the right roughed out now

armsandarmor

ok thanks for the advice! I will post more pics of the halberd soon. I need to stain it now and add some studs down the shaft like some ive seen at museums. I have some updated pics of my grandbascinet with frog mouthed visor for my italian jousting armour. im also going to make a new set of 16ga ar...

armsandarmor

wow that looks nice, i want one. got a link to a thread or page with different pavise designs you can do? ill look at some old art and pm later with some ideas

armsandarmor

im building a halberd. not sure how i should pin it the pole though. small nails? screws? the museum pieces ive seen were riveted but i dont see how i could rivet this one. i could try and drill through it and find some long rivets and do it that way but ive got a lot of rivets and none are this lon...

armsandarmor

dug out your other old armour yet?

armsandarmor

im also interested in the more so before you ship let me know what else you are selling. Thanks!

armsandarmor

what shape are the greaves in? ill take those if theyre decent. send me a pm with your info please

armsandarmor

i have a helm that was used by ukraine team in 2010, its got a 12ga top but has a few dents from pole arm hits to the top. the visor also took a hit hard enough to smash the lock; but instead of popping the visor open it is stuck closed. ive tried prying it but its jammed shut so hard i dont want to...

armsandarmor

i have a youtube downloader i could rip a dvd's worth of video from there and send it to you if you wanted, dunno if postage would be much but a small bubble pack would probably only be a dollar or two. could throw one together and mail em out for postage if people needed.

armsandarmor

i wasnt planning on using it for sca i wouldnt want to add a bargrill to it. although if you welded a grill to it and welded some reinforcing strips to the inside a person could probably convert any helm to sca use. again not my intent, im just looking for a barbuta thatd work for reenactment. it lo...

armsandarmor

i went ahead and bought the cheapest one i could find listed online, so when i get it ill post pics and see how it looks polished and a) is it really stainless b) is it really 16 ga.

armsandarmor

Its advertised as 16g stainless and runs around $200. ide like to see pics of one on a head or that someone actually owns. heres a pic of what im talking about (stolen from random website)

armsandarmor

http://www.youtube.com/watch?v=njL0COmfn7M this looks like a lot of fun. Im not into SCA so much but if this came to the US, ide be all over it. could do without the ac/dc however. or if you havent seen this before.... again could do without the music. http://www.youtube.com/watch?v=TvIKR-gCd-s&feat...

Re: FS - Late XV Century Armet

Re: FS: MRL European Sword and Sword-hilted Dagger low price

Re: FS: MRL European Sword and Sword-hilted Dagger low price

Re: FS: MRL European Sword and Sword-hilted Dagger low price

Re: FS: MRL European Sword and Sword-hilted Dagger low price

Re: WTB: Windlass Steelcrafts Oakeshott Type XIV Arming Swo

WTB: Windlass Steelcrafts Oakeshott Type XIV Arming Sword

Re: Where did you get your cased greaves?

Re: wanted: identification re: recent purchase of samurai sw

Re: wanted: identification re: recent purchase of samurai sw

Re: wanted: identification re: recent purchase of samurai sw

wanted: identification re: recent purchase of samurai sword

Re: Pheonix Dawn Plate Armour: Articulation!

Re: For Sale: Belt Pouches & Arming Caps

Re: -= bascinet hunskull =-

Re: A Second load of stuff for sale

Re: Armoury "Al-master"

Re: Workshop "Battle Forge"

Re: Eds thread

Re: Armor for sale

Re: Best prices on aluminum shields?

Re: Armor for sale

Re: Eds thread

Re: Eds thread

Re: new style sca hand pavise F/S

Re: Eds thread

Re: Lots of Armor for Sale

Re: Lots of Armor for Sale

Re: Lots of Armor for Sale

Re: Armour Failures at the BoTN

Re: BotN DVDs?

Re: anyone know about the hanwei barbuta?

Re: anyone know about the hanwei barbuta?

anyone know about the hanwei barbuta?

Re: WARNING. Post- BoTN plate armour freakout. WARNING