I apologize for the lack of pictures:
We are moving (into a house build in 1752, unfortunately *not* medieval) so other stuff comes first.
I hope the project will resume in December/January and then I'll post pictures of the progress.
Search
Search found 178 matches
- Mon Oct 11, 2021 2:36 pm
- Forum: Interpretive Re-creation
- Topic: German soldier 1450-60, a project
- Replies: 21
- Views: 5056
- Sun Sep 19, 2021 4:36 pm
- Forum: Interpretive Re-creation
- Topic: German soldier 1450-60, a project
- Replies: 21
- Views: 5056
Re: German soldier 1450-60, a project
Edit: I am looking at tiredWeasel's project as "I have a mild steel salet in the style of the mid 15th century based on a guard at the Crucifixion, how should it be finished?" I will polish it and I could leave it blank, of course. But as I said: There might be other possibilities, heat blueing mig...
- Sun Sep 12, 2021 7:07 pm
- Forum: Interpretive Re-creation
- Topic: German soldier 1450-60, a project
- Replies: 21
- Views: 5056
Re: German soldier 1450-60, a project
To clarify, if armour was heat treated and NOT polished, then you can look at the surface, and if it is the right shade of blue, you can be fairly confident that it is *correcty* tempered. I think that "the look" was more a visual way to check the quality. Higher quality armour was often polished w...
- Fri Sep 10, 2021 9:23 am
- Forum: Interpretive Re-creation
- Topic: German soldier 1450-60, a project
- Replies: 21
- Views: 5056
Re: German soldier 1450-60, a project
Oh I know how steel reacts when you temper it. I'm a Büchsenmacher myself. I just thought that the blue color was a deliberate choice and was applied as an decoration. I'm just not sure what I'm seeing on most of these pictures - it does not look like blank steel, like "white" steel - especially not...
- Thu Sep 09, 2021 10:02 am
- Forum: Interpretive Re-creation
- Topic: German soldier 1450-60, a project
- Replies: 21
- Views: 5056
Re: German soldier 1450-60, a project
@Gustovic: Well then I did not recall correctly Mild steel it is.
@Sean M: Thank you, that makes sense that the blue colour is a product of the heat treatment and not a deliberate decoration.
So I guess the best way to finish the helmet is polish it (shiny with scratches) and leave it blank.
@Sean M: Thank you, that makes sense that the blue colour is a product of the heat treatment and not a deliberate decoration.
So I guess the best way to finish the helmet is polish it (shiny with scratches) and leave it blank.
- Sun Aug 22, 2021 1:22 pm
- Forum: Interpretive Re-creation
- Topic: German soldier 1450-60, a project
- Replies: 21
- Views: 5056
Re: German soldier 1450-60, a project
Wouldn't a deep blue not be around 550°F/290°C? (IIRC the helmet is made of C45) I don't want to discuss the polish - I have the thread about armour polishing open :D - but want to hear some thoughts about historical alternatives. I want to go with the "french blue" but just want to hear some though...
- Sun Aug 22, 2021 7:44 am
- Forum: Interpretive Re-creation
- Topic: German soldier 1450-60, a project
- Replies: 21
- Views: 5056
Re: German soldier 1450-60, a project
With the Covid-restrictions relaxed I picked the helmet up in June and am now in the process of polishing the visor. Pictures and a short overview will follow but a quick question first: https://i.pinimg.com/originals/6d/ec/e2/6dece2fa435ea7508b5e5fc2324c9a7a.jpg What are we looking at here? Just a ...
- Sun Jul 04, 2021 4:07 pm
- Forum: Historical Research
- Topic: 1530 armour from St. Marien, Wittenberg
- Replies: 1
- Views: 1119
1530 armour from St. Marien, Wittenberg
While visiting Wittenberg I saw the following statue in the St. Marien, the church where Martin Luther preached and the reformation started. The curator/vicar (I have no idea what his position) said it is from 1530 and not a later restoration or addition. https://www.pinterest.de/erikgiesewiesel/mar...
- Sun May 30, 2021 5:19 pm
- Forum: Armour - Design and Construction
- Topic: ISO specs for ocular perf plate
- Replies: 11
- Views: 1482
Re: ISO specs for ocular perf plate
I don't know if it is what you are looking for, but the fencing masks used for longsword fencing use V2A steel mesh with a 2,5mm (~0.1") mesh width.
Of course - hardened and annealed.
Pretty much indestructible even when fighting with rebated steel swords.
Of course - hardened and annealed.
Pretty much indestructible even when fighting with rebated steel swords.
- Sat Feb 20, 2021 11:52 am
- Forum: Armour - Design and Construction
- Topic: A&A Daggers vs. Jack Test
- Replies: 4
- Views: 1529
Re: A&A Daggers vs. Jack Test
Meh, the test with the swords was kinda pointless - not cutting/slashing only hacking.
But in general I guess it's a mix of the quality of the fabric used and also of the quality of the manufacture.
Given how stiff properly made fabric armour can be I'm always skeptical when I see flabby test pieces.
But in general I guess it's a mix of the quality of the fabric used and also of the quality of the manufacture.
Given how stiff properly made fabric armour can be I'm always skeptical when I see flabby test pieces.
- Wed Jan 27, 2021 6:18 pm
- Forum: Interpretive Re-creation
- Topic: German soldier 1450-60, a project
- Replies: 21
- Views: 5056
German soldier 1450-60, a project
This project I wanted to start years ago but a busy job and general laziness got in my way. But we all have to start somewhere and so I asked a young blacksmith, who had just started his career in armormaking, to build me a helmet after my (vague) specifications. And only a few days before Christmas...
- Mon Nov 30, 2020 12:55 pm
- Forum: Armour - Design and Construction
- Topic: Carter's Blog
- Replies: 99
- Views: 17047
Re: Carter's Blog
The visor is not raised (the same artist drew raised visors of similar types on the same pictures) - the helmet seems to small for the deformed soldier (he's a bad guy, leading Christ to the crucifixion) but the visor is not raised - maybe a little bit, like 5-10°or the helmet is tipped back because...
- Sun Nov 29, 2020 4:15 am
- Forum: Armour - Design and Construction
- Topic: Carter's Blog
- Replies: 99
- Views: 17047
Re: Carter's Blog
https://i.pinimg.com/564x/02/46/4c/02464ca3a94b7080a6c374e0718710ab.jpg I really hate to disagree but I doubt that this fellow would sit flat on a table. (Karlsruhe Passion, 1450-55) I would say, in my limited and prone to misinterpreting knowledge, that your broad statements holds true for later s...
- Wed Nov 18, 2020 8:25 am
- Forum: Armour - Design and Construction
- Topic: Tod's Brigandine Test
- Replies: 22
- Views: 4122
Re: Tod's Brigandine Test
I would say that not all brigandines used steel plates - and he does say that brigandines cover such a wide field that this test is in no ways absolute. @Gustovic: From a testing standpoint his choice of draw weight makes sense - he wants to test penetration and for that it's wise to start with a po...
- Sun Nov 15, 2020 1:09 pm
- Forum: Interpretive Re-creation
- Topic: Late 15th c. Joined Hose and "plumber's buttcrack"
- Replies: 4
- Views: 1144
Re: Late 15th c. Joined Hose and "plumber's buttcrack"
These hosen did have a very low waist compared to later hosen. It is pretty much normal but keep in mind that in most cases you would wear an outer layer that is longer than your doublet and would cover that area. Only when fencing, working or torturing Christ you would want to shed your outer layer...
- Wed Oct 28, 2020 12:43 pm
- Forum: Historical Research
- Topic: Breeches after 1500
- Replies: 5
- Views: 943
Re: Breeches after 1500
Well they did not wear pants for over 200 years, so there is precedent
- Fri Aug 21, 2020 4:10 pm
- Forum: Armour - Design and Construction
- Topic: Carter's Blog
- Replies: 99
- Views: 17047
Re: Carter's Blog
Earlier sallets tended not to have the mouth covering visor. Of course it's hard to gauge in most artwork were the visor or the sallet is tipped up but might a sallet with a visor that reaches the nose but not farther down be more appropriate for the time? I have a few examples were the "short" viso...
- Mon Aug 10, 2020 11:36 am
- Forum: Interpretive Re-creation
- Topic: A Short Round Cloak with Embroidered Collar
- Replies: 31
- Views: 6223
Re: A Short Round Cloak with Embroidered Collar
https://ig14.at/
Not a forum but a page that's smack in your timeframe.
Also they are from Austria.
But they seem to discuss everything in various FB-groups.
Not a forum but a page that's smack in your timeframe.
Also they are from Austria.
But they seem to discuss everything in various FB-groups.
- Sat May 16, 2020 3:23 pm
- Forum: Historical Research
- Topic: Arbalest à Tillolles
- Replies: 133
- Views: 79866
Re: Arbalest à Tillolles
Tom B. posted the manuscript in another thread - and this picture shows a clear view of a spanning belt (front and back):
It doesn't show a hook but a "slotted tab" (my words fail me...) on a chain(?).
Also a T-toggle.
It doesn't show a hook but a "slotted tab" (my words fail me...) on a chain(?).
Also a T-toggle.
- Thu May 07, 2020 6:38 pm
- Forum: Historical Research
- Topic: Question about horse "parking" in the early Middle Ages
- Replies: 23
- Views: 4217
Re: Question about horse "parking" in the early Middle Ages
The pilgrim or merchant angle would be the easiest to exploit for travel and lodging. Aachen received a lot of reliquies in 799 and some roman roads in now Germany where used for travelling and trade up until the modern age (and still exist now). The pilgrimage network would not be as vast as in the...
- Sun Apr 05, 2020 4:32 am
- Forum: Interpretive Re-creation
- Topic: How do the grips of hand pavises work?
- Replies: 10
- Views: 3944
Re: How do the grips of hand pavises work?
@ Mac: I've read that too - but never in the context of an extant shield, they always (afaik) just say "leather". But it certainly seems plausible.
- Sat Apr 04, 2020 7:35 am
- Forum: Interpretive Re-creation
- Topic: How do the grips of hand pavises work?
- Replies: 10
- Views: 3944
Re: How do the grips of hand pavises work?
You can use them while holding the straps in your fist, like a buckler. When the shield is constructed right you can use it quite effectively like that. There are some similar examples - this one has two horizontal bars that would hold strap and add some rigidity to the shield (I'm assuming these ar...
- Sat Apr 04, 2020 7:09 am
- Forum: Historical Research
- Topic: Hidden/Secret Sallets???
- Replies: 7
- Views: 1274
Re: Hidden/Secret Sallets???
So it's possbile that there may be a hidden helmet under those bushy hats? https://www.bilder-upload.eu/upload/cc7f89-1586001803.jpeg (Karlsruhe Passion, ca. 1450) There's also a sallet under a hat (not exactly "hidden" while worn by an armored man) in a painting by Gerard Davis(?) from around 1510-...
- Fri Apr 03, 2020 1:58 pm
- Forum: Armour - Design and Construction
- Topic: Refurbishing a (not so) Great Bascinet
- Replies: 6
- Views: 1632
Re: Refurbishing a (not so) Great Bascinet
Weird, I thought I posted a reply a while back to James Arlen Gillaspie... maybe it got eaten by the server downtime that time. @ James Arlen Gillaspie: That's what I was afraid of. The visor does in fact not hinder my vision but the face opening does. I think it should be more round and less oval a...
- Tue Feb 18, 2020 2:44 am
- Forum: Armour - Design and Construction
- Topic: Need advice on corrazina fauld-to-breastplate transition
- Replies: 17
- Views: 922
Re: Need advice on corrazina fauld-to-breastplate transition
The Munich-breastplate has a closed front - I would guess that a split back would be a better match.
But it still has an intersting rivet arrangement.
But it still has an intersting rivet arrangement.
- Mon Feb 17, 2020 10:57 am
- Forum: Armour - Design and Construction
- Topic: Refurbishing a (not so) Great Bascinet
- Replies: 6
- Views: 1632
Re: Refurbishing a (not so) Great Bascinet
RWWT, I live in an apartment without an anvil :D Apart from that I have a pretty good workshop set up in my apartment (only handheld powertools though) - so I can make noise and dirt, should the need arise. But of course I try to keep the noise to a minimum. The dents are on both sides in roughly th...
- Mon Feb 17, 2020 10:14 am
- Forum: Armour - Design and Construction
- Topic: Refurbishing a (not so) Great Bascinet
- Replies: 6
- Views: 1632
Re: Refurbishing a (not so) Great Bascinet
An observation:
This is the visor in the extreme open position. That's not much - I guess the pivots should have been higher on the skull.
This is the visor in the extreme open position. That's not much - I guess the pivots should have been higher on the skull.
- Mon Feb 17, 2020 10:05 am
- Forum: Armour - Design and Construction
- Topic: Refurbishing a (not so) Great Bascinet
- Replies: 6
- Views: 1632
Refurbishing a (not so) Great Bascinet
A few years ago I bought this beauty for a few € from a friend. It was used in full contact fighting, what would evolve into HMB, and looks the part. It is big, battered and heavy. I never paid it much attention until recently when I worked on a side project that might require a bascinet. So I duste...
- Thu Feb 13, 2020 10:17 am
- Forum: Armour - Design and Construction
- Topic: Trip hammer video
- Replies: 9
- Views: 833
Re: Trip hammer video
They put horse manure on top of the dowels. Comments suggested that this was not universal practice and may be the reason that the stump was rotten - sometimes coal slag / coal dust was used. Both make sense, I guess - coal slag is a pretty efficient vapor barrier but the ammoniac in the manure make...
- Sun Nov 03, 2019 3:59 am
- Forum: Armour - Design and Construction
- Topic: The making of a quick and dirty jack
- Replies: 9
- Views: 1456
Re: The making of a quick and dirty jack
Soo... remember the one time I said, I will continue the project in january? Ha, we all laughed. Fun times where had by all. :D Turns out I resumed the project in Oktober of 2019 and just finished it. I'll update a complete description but for now a quick staged picture of the end result. I'm happy ...
- Sun Aug 18, 2019 9:11 am
- Forum: Interpretive Re-creation
- Topic: braies question
- Replies: 331
- Views: 30633
Re: braies question
My shirt is made of panels 70cm (27,5") wide, the arms have a circumference of 50cm (19,7") with square gores 10cm (4") wide - "The Medieval Tailors Assistant" advises panels with "half chest + 15cm or more" and that's pretty much what I did (chest = 110cm). It still could be wider, but I guess that...
- Wed Aug 14, 2019 3:41 pm
- Forum: Interpretive Re-creation
- Topic: braies question
- Replies: 331
- Views: 30633
Re: braies question
You already have on picture from the Karlsruhe Passion - but this one is also good for shirt related studies. I focus mostly on the time around 1460 but in a HRE-context there are mostly two types of neck openings: the classic keyhole and a simple slit wide enough for the head to pass through and th...
- Sat Aug 03, 2019 5:32 pm
- Forum: Historical Research
- Topic: Sheepskin/goatskin jacket?
- Replies: 5
- Views: 985
Sheepskin/goatskin jacket?
What do you guys think? Sheepskin or fur lined fabric? https://i.ibb.co/t43qqnT/Lyversberg-Passion-Gei-elung-Sheepskin.jpg (Lyversberg Passion, ca. 1465) Klick for hi-res version. Yes - that is the guy with the open leg seam at his hosen. https://i.ibb.co/DLnyBwk/Master-of-the-Karlsruhe-Passion-Nail...
- Thu Jul 25, 2019 8:58 am
- Forum: Armour - Design and Construction
- Topic: The start of a Journey: professional armouring
- Replies: 560
- Views: 39708
Re: The start of a Journey: professional armouring
We did not lose interest - most people just read without commenting.
- Wed Jun 19, 2019 5:55 pm
- Forum: Interpretive Re-creation
- Topic: Sewn into your hosen?
- Replies: 12
- Views: 1231
Re: Sewn into your hosen?
Given that even Christ-tormenting lowlifes are wearing tight fitting hosen I find it hard to believe that it was normal to be sewn into ones hosen. You need servants for this and some of these people aren't even meant to have friends. :D It seems to be a modern idea. Not saying that it wasn't used o...