The Armour Archive

Kenwrec Wulfe

I didnt notice that mistake, it should be .075"

Kenwrec Wulfe

Throwin on ebay is 3 days if I cannot sell this. Really need to pay bills.

Kenwrec Wulfe

Price reduction - NEED to sell to pay bills!

400$

Kenwrec Wulfe

REALLY need to sell - Make REASONABLE offer!

Kenwrec Wulfe

Helm has sold. Thanks for looking.

Kenwrec Wulfe

With this particular set, they are tied at the center to a tab behind the dagging.

Kenwrec Wulfe

Another bump. Need to sell.

Kenwrec Wulfe

Legs have sold. Thank you for looking.

Kenwrec Wulfe

As I mentioned in the original post, I am unsure of the origins. Sorry.

Kenwrec Wulfe

As stated in the original post

- the size fit is 23.5 to 24.25"

Kenwrec Wulfe

Unsure of exact origin - 14ga Mild steel Basinet with riveted aventail and liner for sale - 450$+shipping. Was used once for about 6 fights at a practice. Fits a skull around 23.5-24.25" https://scontent-a-mia.xx.fbcdn.net/hphotos-prn2/t1.0-9/1656411_10151984485827231_1455474727_n.jpg https://sconte...

Kenwrec Wulfe

Bumpity

Kenwrec Wulfe

PM sent

Kenwrec Wulfe

For Sale - 14th Century Oxblood Splinted Cuisses with Polyens - Used once at a practice. Price when new - 575$+shipping Asking - 400$ https://scontent-a-mia.xx.fbcdn.net/hphotos-prn1/t1.0-9/1555385_561168120644022_649313072_n.jpg https://scontent-a-mia.xx.fbcdn.net/hphotos-prn1/t1.0-9/1546258_561168...

Kenwrec Wulfe

Need to Sell...

Kenwrec Wulfe

*Bump*

Kenwrec Wulfe

Sorry - DUR - Forgot to mention size.

It will fit my noggin at 24.5in. comfortably.

Kenwrec Wulfe

Made from .075" (14ga) hardened and tempered 1050 carbon steel. 5 plate construction with steel rivets. Heat colored 1050 fleur cross. Designed with 4 strapping points on the inside for customization to personal tastes. Asking - 500$ Shipping within continental US included. https://scontent-a-mia.xx...

Kenwrec Wulfe

Second Update: Due to information discovered and revealed because of, but unrelated to, his "out of commissions" status, Audun Hroarsson will no longer be associated with Wulfe Armoury from this day forth. If you had inquired with him with interest in gauntlets, please redirect those inquiries to me...

Kenwrec Wulfe

Further Update: I have been contacted by several people. I have verified that two have existing commissions. Please, when you contact me regarding this, give me exact and specific details about the commission, modifications discussed, determined price, deposit amount made (if one was made), etc... T...

Kenwrec Wulfe

Greetings Everyone, Audun Hroarsson has befallen some personal issues and will be out of commission for the foreseeable future. For those of you who have commissions with Audun Hroarsson, who contacted him directly and did not go through Wulfe Armoury, please contact me, Kenwrec Wulfe (the propriet...

Kenwrec Wulfe

The effigy examples I saw seem to show the plates on top of the leather, unlike a number of the Wisby type fingered gauntlets. I only used the Wisby type gauntlets as a reference, but was guided in my design and style by the effigies.

Kenwrec Wulfe

SCA Combat. The wrist has a good range of motion. No less than a pair of Wisby #1 gauntlets. The plates are attached to leather and function like a Coat-of-Plates for "articulation".

Kenwrec Wulfe

A little bit ago, a friend (and client) came to me asking to make a certain type of gauntlets and vambraces. The only source were a few effigy pics. http://effigiesandbrasses.com/media/cache/effigiesandbrasses.com/original/oliver_ingham_s21_r524_large.jpg http://effigiesandbrasses.com/media/cache/ef...

Kenwrec Wulfe

+1 on the Onion Top Bascinet.

Kenwrec Wulfe

That answers my question. I will make a trial purchase and see how it goes. I dread wetting it and cutting it, as it smells, well like rawhide, lol. The strips should be a bit cheaper than the sources I have seen of late. What width will you need for a good shield? 2 1/2-3" Personally, I use 3" str...

Kenwrec Wulfe

The manuscript pics just look like they are a representation of houndskull visors that have been raised up on the hinge.

Kenwrec Wulfe

Its important to use non additive oils though... you really don't want some things penetrating the surface of your steel and crapping it up. I have used clean oil, dirty oil, clean trans fluid, dirty trans fluid, water, brine and did tests with vinegar and even baking soda water. There were no sign...

Kenwrec Wulfe

Its important to use non additive oils though... you really don't want some things penetrating the surface of your steel and crapping it up. I have used clean oil, dirty oil, clean trans fluid, dirty trans fluid, water, brine and did tests with vinegar and even baking soda water. There were no sign...

Kenwrec Wulfe

Just remember that if you are using a controller/SSR/thermocouple to control the heat in your kiln, make sure the parameters are properly set-up (RTFM). Also, if you have to add an extension, make damn sure you do not have the wires touching (a "cold junction"). That'll drive you nuts! Also, if you...

Kenwrec Wulfe

i ordered an infra red thermometer to 2000 F accurate within 1 F . i was concerned about accurate measurements i have heard about shattering and such at the wrong degree . does my process sound right ? does anyone have experience heat treating and tempering using an electric kiln ? cheers I would r...

Kenwrec Wulfe

Stefan ap Llewelyn wrote:Are these SCA legal?

Having been a marshal in two kingdoms over the last 9 years, my opinion would be no. Though gorgeous, those gaunts would be like punch daggers are could easily slip between a bargrill or into an eyeslot.

IHMO, two pence, etc... YMMV

Kenwrec Wulfe

Sweet. I'm skinny as hell, but by his estimate I can carry 70 pounds of kit... Some of the big boys in the SCA can wear a kit that outweighs me! I have to disagree with the weight thing. I am 5'9" and 190 and my kit weighs ~40lbs. with all armour bits I have, including a mail standard. It is compri...

Kenwrec Wulfe

I would say we paint it all pink and make him wear it and fight in it.

Kenwrec Wulfe

Impressive!

Re: FS - Mid 14th Century Greathelm

Re: FS - Mid 14th Century Greathelm

Re: FS - Mid 14th Century Greathelm

Re: FS - Mid 14th Century Greathelm

Re: FS - Basinet w/ aventail and liner

Re: For Sale - 14th Century Splinted Cuisses with Polyens

Re: FS - Mid 14th Century Greathelm

Re: For Sale - 14th Century Splinted Cuisses with Polyens

Re: FS - Basinet w/ aventail and liner

Re: FS - Basinet w/ aventail and liner

FS - Basinet w/ aventail and liner

Re: FS - Mid 14th Century Greathelm

Re: For Sale - 14th Century Splinted Cuisses with Polyens

For Sale - 14th Century Splinted Cuisses with Polyens

Re: FS - Mid 14th Century Greathelm

Re: FS - Mid 14th Century Greathelm

Re: FS - Mid 14th Century Greathelm

FS - Mid 14th Century Greathelm

Re: WULFE ARMOURY - ANNOUNCEMENT

Re: WULFE ARMOURY - ANNOUNCEMENT

WULFE ARMOURY - ANNOUNCEMENT

Re: Mid 14th century Fingered Gauntlets and Vambraces projec

Re: Mid 14th century Fingered Gauntlets and Vambraces projec

Mid 14th century Fingered Gauntlets and Vambraces project

Re: What kind of helmet is Kelson wearing here?

Re: Any Interest in Rawhide Sides or Strips?

Re: Brimmed Bascinet-Am I seeing this right?

Re: i bought a kiln, how do i heat treat and temper ?

Re: i bought a kiln, how do i heat treat and temper ?

Re: i bought a kiln, how do i heat treat and temper ?

Re: i bought a kiln, how do i heat treat and temper ?

Re: -= Auction=- -=Spring steel gauntlets=-

Re: I'm considering buying from Blankenshield armoury

Re: Help me improve my kit please, all advice appreciated

Re: High end leather suit - Flame Dragon Armor