I did not think to take them off the rattan for the pictures. They attached as shown below. I used duct tape "rope" and they never moved an inch. You could use hose clamps, or some other method to attach them. https://lh3.googleusercontent.com/_FsnvN0adiVQ/TXQfDwi3RvI/AAAAAAAAAJU/FU8o9aPvN...

Tentative dibs on the elbows. Are they big enough to be list legal or is that just the padding you wear under your cops? PM sent. In Atlantia they were legal (unless something has changed) as list legal. I passed inspection wearing them hidden without any cops (they have a rigid elbow). Without dro...

Due to two torn rotator cuffs (one in each shoulder) and the healing time for someone near 50 years old, I am selling my armour. We have for sale in this listing McDavid Hex Pad Short, Leather Half-Gauntlet, Chainmail rings, and a aluminum Shield . Black McDavid Hex Pad Shorts SOLD to Mjaay - track...

Due to two torn rotator cuffs (one in each shoulder) and the healing time for someone near 50 years old, I am selling my armour. We have for sale in this listing a set of Stonekeep Arms. Stonekeep Splinted Stainless Arms - Sold to GodfreyTheVigilant - tracking number sent - $40.00 These are several...

Due to two torn rotator cuffs (one in each shoulder) and the healing time for someone near 50 years old, I am selling my armour. We have for sale in this listing 2 Basket Hilts. Aluminum Basket Hilt Maker Unknown - SOLD - $20.00 A very used aluminum basket hilt, basic but sturdy Mild Steel Basket H...

Due to two torn rotator cuffs (one in each shoulder) and the healing time for someone near 50 years old, I am selling my armour. We have for sale in this listing 1 Ironmonger Armory Basket Hilt. Ironmonger Stainless Steel Heart Shaped Basket Hilt - Sold to Glaukos - tracking number sent - $45.00 ht...

Md02geist wrote:I'll take those lacrosse gloves

I will send a PM with my PayPal address, and get your shipping information.

Thanks,

Due to two torn rotator cuffs (one in each shoulder) and the healing time for someone near 50 years old, I am selling my armour. We have for sale in this listing hockey elbows, street hockey gloves, lacrosse gloves. CCM Vector '08 Hockey Elbows - SOLD to Cisco, tracking number sent - $25.00 Used fo...

Dibs on the knee cops, pending size information. Can you give me an (unpadded) circumference on your knee? And do they fit well? I never actually used them, so they do not have mounting holes. But, from side to side the knee cop is 7 inches across and 5 /12 inches long. My knee is 19 inches around ...

Dibs on Spalders and potentially on the Gorgets. What size neck are these designed to fit? I have a 17 inch neck and am in the middle hole on both of them. So a 17 to 19 inch neck would be fine with padding. Also, if you buy the helm and these items I can waive the shipping on everything. Thanks, W...

GunnarUlfson wrote:Dibs on Helm #1. PM shipping to 30157 and I can paypal

I can ship whichever method you like. Let me know and I can PM you the PayPal address.

UPS Ground $12.49
FedEx Ground Home Delivery $11.55
USPS Priority Mail $10.00

Thank you.

William Pynnoke

Due to two torn rotator cuffs (one in each shoulder) and the healing time for someone near 50 years old, I am selling my armour. We have for sale in this listing spaulders, gorgets and knees. Stonekeep Spaulders - SOLD to GunnarUlfson - tracking number sent - $40.00 These are several years old, but...

Due to two torn rotator cuffs (one in each shoulder) and the healing time for someone near 50 years old, I am selling my armour. We have for sale in this listing two helms. My head is 23 inches in diameter. Helm #1 - Sold to GunnarUlfson - tracking number sent - $150 This helm is a Triplette Arms 1...

We have the following Margo Anderson Elizabethan Patterns for sale. These were purchased a couple of years ago. Patterns may have been update since we purchased them. Links and prices are for the current products. https://lh5.googleusercontent.com/_FsnvN0adiVQ/TXOp154SW7I/AAAAAAAAAGE/ZEfBUMd9XqA/El...

Dear Gentles, Please forgive my late entry in this thread. I have pondered the question and hesitated to reply, because once you put something down in writing, for me it takes on deeper significance. It is one thing to know the desires of your heart, but yet another to share those publicly. Still fu...

Drive home for a couple of hours and wonder the whole way why all the stuff I practiced and had in my mind to do beforehand went so horribly wrong...lol

Otto,

What is your current turnaround time on the sword and shield baskets?

Dang, I have an old peascod kicking around the shop. Way too small for you though. But it is rusty and apprentice welded. That much fits your description. Best of luck on your quest. Hal Hal, if you are interested in selling it I could possibly use it. Currently about 42 inch chest would work nicel...

Thank all of you very much. There were several things I did not consider that you pointed out and that was extremely helpful. Also, my study level can now go from memorize this whole thing to understand and be able to relate it back.

Greetings and Salutations Wise Sages of the Armour Archive, I am not anywhere ready to authorize in sword and shield and do have a local group which is very helpful and friendly. It seems like a good idea to start with the Marshal's Handbook and get the part concerning the rules now. However, I thou...

I have a set of the stainless splinted legs from Stonekeep. Everyone who sees them comments very positively on the construction, looks, and usability. I personally love them! Additionally, my build is kind of strange and Mike instituted the cuisse sizing because of my short legs. He let me send them...

Maelgwyn, Thank you for your help. While I have searched and read just about everything I can on this forum and as you pointed out there is a lot of detail, for me at least it is very confusing and sometimes conflicting. I appreciate your taking the time to answer my questions. I know it many it see...

RenJunkie,

That is exactly what I needed! That link to House of the Wolf is perfect. He not only describes each step, but has pictures as well. Fantastic! Thank you so much for taking the time to help.

Bene agendo nunquam defessus,

William Pynnoke

Maelgwyn, Thank you for your ideas. Most wonderful help. I have to agree that Torvaldr's gauntlets are very nice. I would love to have a pair exactly like them. I might try demi-gauntlets first and work my way up to full ones. The poster board sounds like an excellent way to work out a pattern! The ...

Gavin, You were incredibly helpful! I went online to Tandy and found their "Select Import Saddle Skirting" in 13 to 15oz weight with 22 to 24 sq ft on sale for $79.00. I called the closest store and spoke with an employee who is in the SCA (he actually said he found Tandy through the armou...

Greetings Armour Archiver’s, Over the last year I have been a daily lurker on these forums and have learned a great deal (yes the search function). I feel like I know many of you from reading your posts I hesitate to post asking this question, but feel that someone could point me in the right dire...

Funds sent via PayPal.

Thanks,

Bill

I up my bid to $100.00

Thanks,

Bill

I will bid $75.00. Maybe I can get a Stonekeep helm to match the rest of my Stonekeep gear!

Thanks,

Bill

It has been a long time overdue on my part, but this is a review of Stonekeep Armory. Michael is a wonderful, customer service oriented person, who goes out of his way to satisfy his customers. My first purchase from Stonekeep was a pair of "in-stock" stainless splinted legs that were a sale on the ...

Aaron, I have just the helmet you are seeking. It is brand new from Ironmonger and way too big to fit me. I can get you the measurements tonight, but it would be large enough to fit just about anyone. I paid $140 for the munitions grade basinet with the flip visor. It is unpainted (I have started po...

Michael,

I ordered your regular size splinted legs from the sale you had here on the archive and they fit me perfect. By the way I am 6'0 and around 390lbs, but I knew they would fit because I checked your sizing page first. I really think that is the key as you stated.

Thanks,

Bill

I just received the stainless splinted legs and they are GREAT! Communication was wonderful and my overall satisfaction could not be better. I am saving to get the matching stainless splinted arms next and can not wait to do business with Stonekeep again. Then maybe the 6 Piece Stainless Steel Pauld...

I just placed an order for these wonderful looking legs. Hopefully I will be the one who gets them

Thanks,

Bill