GDFB Bascinet Rehab
- Pitbull Armory
- Archive Member
- Posts: 5312
- Joined: Wed Dec 17, 2008 10:28 pm
- Location: Out in the woods
- Contact:
GDFB Bascinet Rehab
Hi guys, I got this GDFB Bascinet from JousterAlan a while back here on the AA. It had a flat face when I got it, I mean it was flat and square looking. Just a few simple things made this helm alot more pleasant to look at and it was fun just getting to do the easy part of something. Heres what I did..
Dished the visor out about 2.5 inches.
Drilled holes under the eye openings and made them go from big to small, added an inner ring of small holes on each side.
Cleaned up all the edges and eye openings.
Added a Brass Peg to lift the visor with
Added a creased Brass strip with borders scribed on it up the center with a deco washer.
Squished the helms bottom together to be narrower on the bottom front to back.
Added a Bar across the bottom of the face opening behind the visor to hold up the front of the aventail.
Nothing major just small fun stuff.
Have a good weekend
Pitbull
Dished the visor out about 2.5 inches.
Drilled holes under the eye openings and made them go from big to small, added an inner ring of small holes on each side.
Cleaned up all the edges and eye openings.
Added a Brass Peg to lift the visor with
Added a creased Brass strip with borders scribed on it up the center with a deco washer.
Squished the helms bottom together to be narrower on the bottom front to back.
Added a Bar across the bottom of the face opening behind the visor to hold up the front of the aventail.
Nothing major just small fun stuff.
Have a good weekend
Pitbull
- Attachments
-
- DVC00136.JPG (69.67 KiB) Viewed 851 times
-
- DVC00135.JPG (62.16 KiB) Viewed 851 times
-
- DVC00134.JPG (61.3 KiB) Viewed 851 times
Last edited by Pitbull Armory on Fri Apr 20, 2012 2:12 pm, edited 2 times in total.
Hi, Please visit https://www.facebook.com/PITBULL-ARMORY-264094743168/ if you get time. Or contact me at leiderandy@yahoo.com if you have any questions. Take care, Andy @ Pitbull Armory
- Pitbull Armory
- Archive Member
- Posts: 5312
- Joined: Wed Dec 17, 2008 10:28 pm
- Location: Out in the woods
- Contact:
Re: GDFB Bascinet upgrade fun
last 2, After looking at the helm in pics I may add a ring of smaller holes around the clusters on each side for more of a starburst look.
- Attachments
-
- DVC00138.JPG (53.24 KiB) Viewed 850 times
-
- DVC00137.JPG (58.61 KiB) Viewed 850 times
Hi, Please visit https://www.facebook.com/PITBULL-ARMORY-264094743168/ if you get time. Or contact me at leiderandy@yahoo.com if you have any questions. Take care, Andy @ Pitbull Armory
- Pitbull Armory
- Archive Member
- Posts: 5312
- Joined: Wed Dec 17, 2008 10:28 pm
- Location: Out in the woods
- Contact:
Re: GDFB Bascinet upgrade fun
Here is the thread with an original pic of the helm, From the angle of the pic you cant see how flat the face really was, Pancakeish. A little dishing made a big difference I think.
viewtopic.php?f=3&t=143493&hilit=GDFB+bascinet
Have a good weekend
Pitbull
viewtopic.php?f=3&t=143493&hilit=GDFB+bascinet
Have a good weekend
Pitbull
Hi, Please visit https://www.facebook.com/PITBULL-ARMORY-264094743168/ if you get time. Or contact me at leiderandy@yahoo.com if you have any questions. Take care, Andy @ Pitbull Armory
- PatternWeld
- Archive Member
- Posts: 2230
- Joined: Mon Jul 14, 2008 6:31 pm
- Location: Al-Sahid, Caid
Re: GDFB Bascinet upgrade fun
Amazing upgrade job. Its a completely different helmet.
Reminds me a bit of the ones from the movie "Excalibur" or "Sword of the Valiant" very much a Terry English feel to it.
Reminds me a bit of the ones from the movie "Excalibur" or "Sword of the Valiant" very much a Terry English feel to it.
Jonathan Baird wrote: If the way were meant to be easy it would teach you no lesson.
Rhyance wrote:Seek excellence the way a man with his hair on fire seeks a pond. Rinse and repeat. Every day.
- RandallMoffett
- Archive Member
- Posts: 4613
- Joined: Wed May 01, 2002 1:01 am
- Location: SE Iowa
Re: GDFB Bascinet upgrade fun
It is as PatternWeld says amazing. It is so different from the original I doubt most would assume they had been one and the same earlier. I think you have really made this a great helmet. Nice work.
RPM
RPM
- Swete
- Archive Member
- Posts: 1907
- Joined: Thu Jan 15, 2009 9:30 pm
- Location: Vogelburg, Gleann Abhann (Pollock, LA)
Re: GDFB Bascinet upgrade fun
Awesome! Would it still maintain thickness usable for SCA combat after the dishing?
Squire to Sir Grimbaldus Bacon
Nihtgenga Fusleoð: Ærest æt acwallen, ærest æt gecringan!
Nihtgenga Fusleoð: Ærest æt acwallen, ærest æt gecringan!
- InsaneIrish
- SQUEEE!
- Posts: 18252
- Joined: Thu Aug 10, 2000 1:01 am
- Location: Jefferson City Mo. USA
Re: GDFB Bascinet upgrade fun
dude NICE job.
Now you need to figure pricing on "rehabing" GDFB helms. Cause, that came out so nice I'd certainly entertain buying one.
Now you need to figure pricing on "rehabing" GDFB helms. Cause, that came out so nice I'd certainly entertain buying one.
Insane Irish
Quote: "Nissan Maxima"
(on Pennsic) I know that movie. It is the 13th warrior. A bunch of guys in armour that doesn't match itself or anybody elses, go on a trip and argue and get drunk and get laid and then fight Tuchux.
Quote: "Nissan Maxima"
(on Pennsic) I know that movie. It is the 13th warrior. A bunch of guys in armour that doesn't match itself or anybody elses, go on a trip and argue and get drunk and get laid and then fight Tuchux.
- Sigismund von Helfenstein
- Archive Member
- Posts: 860
- Joined: Sat May 07, 2011 12:17 pm
- Location: Barony of Bjornsborg, Ansteorra (San Antonio, TX)
Re: GDFB Bascinet upgrade fun
^this^InsaneIrish wrote:dude NICE job.
Now you need to figure pricing on "rehabing" GDFB helms. Cause, that came out so nice I'd certainly entertain buying one.
I've got a GDFB pigface that could certainly use some rehabilitation.
Swer an rehte güete
wendet sîn gemüete,
dem volget sælde und êre
Whoever to true goodness
Turns his mind
He will meet with fortune and honour.
- Hartmann von Aue, 13th Century
wendet sîn gemüete,
dem volget sælde und êre
Whoever to true goodness
Turns his mind
He will meet with fortune and honour.
- Hartmann von Aue, 13th Century
- Pitbull Armory
- Archive Member
- Posts: 5312
- Joined: Wed Dec 17, 2008 10:28 pm
- Location: Out in the woods
- Contact:
Re: GDFB Bascinet upgrade fun
Thank you everyone!
Swete the helm and vizor are 14g so yes it would be fine for SCA I figure.
Rofl Irish now I have to go re name this thread, ty for the laugh.
Have a good weekend!
Pb
Swete the helm and vizor are 14g so yes it would be fine for SCA I figure.
Rofl Irish now I have to go re name this thread, ty for the laugh.
Have a good weekend!
Pb
Hi, Please visit https://www.facebook.com/PITBULL-ARMORY-264094743168/ if you get time. Or contact me at leiderandy@yahoo.com if you have any questions. Take care, Andy @ Pitbull Armory
Re: GDFB Bascinet Rehab
Thanks for the pics PB, you are a miracle worker.
And I lift my visor to you sir... I would have never undertaken that quest.
Jolly well done.
Hal
And I lift my visor to you sir... I would have never undertaken that quest.
Jolly well done.
Hal
- GuntherofOrkney
- Archive Member
- Posts: 1606
- Joined: Mon Mar 29, 2004 6:04 am
- Location: San Diego CA.
- Contact:
Re: GDFB Bascinet Rehab
hmm thats nice man i might pick one up and do the same type of thing to it but i will harden the mild steel.