First piece at air planisher....

Halberds · Post by **Halberds** » Tue Sep 20, 2005 10:38 pm

Sorry... I could not find my last post about this.
This is the part Alcy told me to get:
http://home.armourarchive.org/members/h ... essend.jpg
This is the air hammer tip that is to be used on the for sale... "Planisher Machine".
This is also the cheap air hammer device shown.

With the help of Plasmaman, we will fabricate the frame for this machine and make it work.

The foot air switch control will be extra... I can give a link where it can be purchased.

One will also be needing the extra lengths of air hose and proper fittings.

A 5 HP. compressor is recommended....

Hal

Ps: I am working on a fluting die as we speak.

Kenwrec Wulfe · Post by **Kenwrec Wulfe** » Wed Sep 21, 2005 8:17 am

Am I to understand that you will be fabricating the planishing machine itself?

I would certainly be interested in one if you are. already have a compressor of more than adequate size (27 gal 5.5hp - 155psi)

Halberds · Post by **Halberds** » Wed Sep 21, 2005 12:29 pm

Yes it will be a first class machine.

I will put the first one on the classifieds.

Hal

Halberds · Post by **Halberds** » Wed Sep 21, 2005 10:59 pm

This is the hammer and anvil so far.

I used the "Newbie Tool Kit" mushroom for the anvil.
I hope to design some degree of adjustment into this device.

I will let you know how the frame comes out.

Hal

Kenwrec Wulfe · Post by **Kenwrec Wulfe** » Thu Sep 22, 2005 7:53 am

Excellent - please do keep me updated!