Miss Beverly Came calling
Posted: Wed Jul 31, 2002 4:41 pm
Well, two years and change of saving, and my B-2 finally arrived! Very exciting day. Cannot wait to get cutting!
M.S.
M.S.
The Armour Archive
Discussion Boards
http://forums.armourarchive.org/phpBB3/
Miss Beverly Came calling
http://forums.armourarchive.org/phpBB3/viewtopic.php?f=1&t=5620
Page 1 of 1
Posted: Wed Jul 31, 2002 4:45 pm
treat her nice, and buy quality oils and lubricants
Posted: Wed Jul 31, 2002 5:51 pm
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR><font face="Verdana, Arial" size="2">Originally posted by mordreth:
treat her nice, and buy quality oils and lubricants</font><HR></BLOCKQUOTE>
are there any you recommend? I need to buy some for my B3. Right now I only have light household oils.
treat her nice, and buy quality oils and lubricants</font><HR></BLOCKQUOTE>
are there any you recommend? I need to buy some for my B3. Right now I only have light household oils.
Posted: Wed Jul 31, 2002 6:46 pm
How much did your B-2 cost? Is it worth the difference in cost between the B-2 and the B-3? Oh yeah--do you know if a B-3 will cut 14g mild steel? Apologies for all the questions 
Thanks.
Owain Cadarn ap Dafydd of Caer Du
------------------
"You can't really dust
for vomit, can you?"
--Nigel Tuffnel (Spinal
Tap)
Thanks.Owain Cadarn ap Dafydd of Caer Du
------------------
"You can't really dust
for vomit, can you?"
--Nigel Tuffnel (Spinal
Tap)
Posted: Wed Jul 31, 2002 8:48 pm
B-1 are rated for 14ga mild, 18ga stainless, B-2 are rated for 10ga mild, 14ga stainless, and B-3 are rated for 3/16" mild and 10ga stainless.
Unless your cutting out hundreds of helmet tops a B-2 should be sufficient.
Unless your cutting out hundreds of helmet tops a B-2 should be sufficient.
Posted: Wed Jul 31, 2002 9:49 pm
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR><font face="Verdana, Arial" size="2">Originally posted by Jacob:
<B>
are there any you recommend? I need to buy some for my B3. Right now I only have light household oils.</B></font><HR></BLOCKQUOTE>
*******************************************
I have my shop in the garage so I worry about humidity, I usually spray the tools down with Break Free (love the stuff) when I'm done for the day It doesn't get crappy if you leave it sitting like wd40 tends to
I like using manual transmission oil as a cutting lubricant, I've kept hearing that it's not really necessary, but I believe in being kind to tools that cost as much as a beverly does
<B>
are there any you recommend? I need to buy some for my B3. Right now I only have light household oils.</B></font><HR></BLOCKQUOTE>
*******************************************
I have my shop in the garage so I worry about humidity, I usually spray the tools down with Break Free (love the stuff) when I'm done for the day It doesn't get crappy if you leave it sitting like wd40 tends to
I like using manual transmission oil as a cutting lubricant, I've kept hearing that it's not really necessary, but I believe in being kind to tools that cost as much as a beverly does
Posted: Sat Aug 03, 2002 1:35 am
B-1 got to 14!!!! Just what I need. How much do they cost? Thank you. O and if you have or no of a used one(or b-2) tell me, please.
Posted: Sat Aug 03, 2002 9:14 pm
I got mine for the bargain price of 600 clams. Start saving your milk money now.
M.S.
M.S.