Page 1 of 1

Tinning

Posted: Sun Aug 25, 2002 4:20 pm
by Benalishlancer
How would I go about tinning plates for a brigandine?

Posted: Sun Aug 25, 2002 10:07 pm
by Mykaru
Go here:http://www.eskimo.com/~cwn/hardening.html

(Scroll to the bottom). At some point you might thank Sinric for posting this valuable information for all of us. Image

Posted: Sun Aug 25, 2002 10:45 pm
by Rev. George
In theory:

melt tin, flux plate, dip into molten tin. hold for a few seconds, remove and let cool.

Flux with? I'd probly reccomend plumbers paste flux.

-+G

Posted: Sun Aug 25, 2002 11:20 pm
by Steve S.
Is Sinric a Laurel? If not, where does he live?

Steve

------------------
Forth Armoury
Highly authentic, affordable riveted maille.

Posted: Mon Aug 26, 2002 5:14 am
by chef de chambre
No Steve, he isn't.

He lives about 4 miles from me, in N.H.

------------------
Bob R.

Posted: Mon Aug 26, 2002 6:37 am
by Steve S.
Thanks Bob. Time to write letters. This fellow, whom I've never met, certainly fills the bill to my expectations, and beyond.

Do you happen to know if he plays SCA, and if so, his SCA name, Kingdom, and group? A search of the Rolls Ethereal turned up nothing on Craig Nadler.

Steve

------------------
Forth Armoury
Highly authentic, affordable riveted maille.

[This message has been edited by Steve -SoFC- (edited 08-26-2002).]

Posted: Mon Aug 26, 2002 3:35 pm
by Friedrich
Yes, he is in the SCA.
I think his full name is Sinric Mailweaver.
He's in East Kingdom - Stonemarche (NH).


[This message has been edited by Friedrich (edited 08-26-2002).]

Posted: Mon Aug 26, 2002 4:24 pm
by chef de chambre
Hi Steve,

Well, what do you expect from an orginization where most people know each other by 'persona' names? Image

Yes, his information is as Friedrich states, he also is a Wolfe Argent veteran. If you want to see tinning and brigandines, just set it up with me, and I will liason, as Craig is dreadful regarding e-mail communication. Fall/Winter is the best timeframe for any visits, as skydiving is another hobby of his.

------------------
Bob R.