Page 1 of 1

Testing my edge geometry modification

Posted: Wed Jun 10, 2015 10:58 am
by Chan Lancelot
https://www.youtube.com/watch?v=IiHCNeGoRUU
Testing out the tinker custom longsword after I had spent 6 hours to modify its geometry with diamond stones to very streamline.

Re: Testing my edge geometry modification

Posted: Fri Jun 12, 2015 7:38 am
by Chan Lancelot
https://youtu.be/yu0A0C0zPY0
After modifying the edge geometry for 4 hours with diamond stones, the angus trim bastard sword cuts thick roll with single hand easily!

Re: Testing my edge geometry modification

Posted: Fri Jun 12, 2015 7:56 am
by Chan Lancelot
To give a proper aspect on how difficult the cuts I usually did were, here are some students' practice videos.

https://youtu.be/KChnoOBGSq0
https://www.youtube.com/watch?v=tU9XpzqGROM
https://www.youtube.com/watch?v=5n1Ouzyxxao

Re: Testing my edge geometry modification

Posted: Sun Jun 14, 2015 7:14 am
by Chan Lancelot
https://youtu.be/QaAeEwa8Gjs
Hiu Tung Chan used darksword danish 2 hander and Edwin Chan used Longship Armoury LLC John Lundemo made Zhanmadao that I designed, to practice cutting from the sparring stance.

As a result, we figured out that the darksword danish 2 hander needed to be streamlined in the edge profile to facilitate such cuts.

Re: Testing my edge geometry modification

Posted: Sun Jun 14, 2015 12:32 pm
by Chan Lancelot
http://youtu.be/OfCJRaWVLPs

After 5 hours of edge geometry modification, the darksword danish two hander is short cut capable now.

Re: Testing my edge geometry modification

Posted: Mon Jun 15, 2015 9:35 am
by Chan Lancelot
https://youtu.be/EJ6pn-LIjok

The owner tested the sword himself.

Re: Testing my edge geometry modification

Posted: Fri Jun 19, 2015 8:01 am
by Chan Lancelot
https://youtu.be/wgdrkx90jfU
Henry's short cut from the sparring stance with ronin O katana. Passed.

Re: Testing my edge geometry modification

Posted: Wed Jun 24, 2015 8:20 am
by Chan Lancelot
https://youtu.be/Y6q_nERQ3EE
The Sky Edge Long Dao I designed, made by Longship armoury John Lundemo. Streamlined and sharpened by myself, to 8000 grit and stropped.

Re: Testing my edge geometry modification

Posted: Thu Jun 25, 2015 4:31 am
by Chan Lancelot
Zheng Qi Ren Ching Jian factory edge:
https://www.youtube.com/watch?v=EW_JyhlXaKA

After my modification, cutting an even bigger roll that was usually for 2 handed swords:
https://www.youtube.com/watch?v=SU2xXSe-Mx4

Re: Testing my edge geometry modification

Posted: Sat Jun 27, 2015 7:45 am
by Chan Lancelot
https://youtu.be/mfwvA9hvAII
Streamlined Zheng Qi Ren Han Jian

Re: Testing my edge geometry modification

Posted: Wed Jul 08, 2015 7:29 am
by Chan Lancelot
https://www.youtube.com/watch?v=IgkuzqbyFbw
Dung Dung testing his dao modded by me, streamlined edge.

Re: Testing my edge geometry modification

Posted: Sun Jul 12, 2015 5:31 am
by Chan Lancelot
https://youtu.be/mguKr3NZ-2w
Dung testing grosse messer with Lancelot streamlined edge

Re: Testing my edge geometry modification

Posted: Sun Jul 12, 2015 6:40 am
by Chan Lancelot
https://youtu.be/Ixvk-dNrDyo
Dung dung tested lung chuan ching dao streamlined by me

Re: Testing my edge geometry modification

Posted: Mon Jul 13, 2015 6:01 am
by Chan Lancelot
https://youtu.be/qYPCKoiAyxg
The ching dao owner tested the sword himself.

Re: Testing my edge geometry modification

Posted: Wed Jul 15, 2015 7:46 am
by Chan Lancelot
https://youtu.be/NnAbFNalMC0

Practice practice.

Re: Testing my edge geometry modification

Posted: Thu Jul 16, 2015 8:03 am
by Chan Lancelot
https://youtu.be/QJRaXXPvSd4
Keith's cutting from the 0.2 stance.

Re: Testing my edge geometry modification

Posted: Fri Jul 17, 2015 9:31 am
by Chan Lancelot
Today's practice:
https://www.youtube.com/watch?v=7NsD-deqM8A
Dung with Zheng's 399 katana streamlined by me
https://www.youtube.com/watch?v=M_eiEV9SzkA
Friend with Zheng's han jian streamlined by me
https://www.youtube.com/watch?v=rY3QZ1QA1-s
Taku with a mid-carbon lung chuan katana for student use
https://www.youtube.com/watch?v=2pEMnuBjSMM
Fion with a mid-carbon lung chuan katana for student use
https://www.youtube.com/watch?v=a2glinnJdMs
Henry with ronin o katana
https://www.youtube.com/watch?v=gxO69KSJ9qo
Old ghost with a ring dao.

Re: Testing my edge geometry modification

Posted: Sat Jul 18, 2015 8:02 am
by Chan Lancelot

Re: Testing my edge geometry modification

Posted: Sun Jul 19, 2015 6:38 am
by Chan Lancelot

Re: Testing my edge geometry modification

Posted: Mon Jul 20, 2015 7:57 am
by Chan Lancelot
https://youtu.be/06WUBIaCoZ4
After streamlining Tun's twin Hanwei Dao, I tested with a simultaneous twin dao cuts.

Re: Testing my edge geometry modification

Posted: Tue Jul 21, 2015 7:33 am
by Chan Lancelot

Re: Testing my edge geometry modification

Posted: Sun Jul 26, 2015 5:36 am
by Chan Lancelot
https://youtu.be/l3KLdVmRyds
today's practice. Dung has achieved my level. :)

Re: Testing my edge geometry modification

Posted: Mon Jul 27, 2015 6:51 am
by Chan Lancelot
https://youtu.be/WwDSsaQUsjM

Taiji Dao and Pudao with Lancelot-streamlined-edge test.

Re: Testing my edge geometry modification

Posted: Sun Aug 02, 2015 5:42 am
by Chan Lancelot
https://youtu.be/CNuzzMxReuc
Hanwei Great sword of war streamlined.

Re: Testing my edge geometry modification

Posted: Mon Aug 10, 2015 10:31 am
by Chan Lancelot
https://youtu.be/brlj7K46o68
Streamlined the edge of the longship zhanmadao I designed, tested with the 2 stages powering mechanism I've been teaching my students.

Re: Testing my edge geometry modification

Posted: Thu Aug 13, 2015 7:34 am
by Chan Lancelot
https://youtu.be/nnpjyOR6-4I
teaching 2 stages powering