Page 1 of 1
Stainless fluted phrygian for sale
Posted: Wed Dec 23, 2009 4:46 am
by M.Suprovich
New helmet for sale!
The helm made from 2mm (14ga)
stainless steel.
The face plate is made of brass, riveted over exactly the same plate of
stainless steel.
Mirror polish
SCA legal chin straps
Brass rivets
Liner
This helmet now in the U.S.
Price 550$ + shipping
<a href="http://photofile.name/users/wildarmour/96296947/114042387/"><img src="http://photofile.name/photo/wildarmour/96296947/large/114042387.jpg" border="0"></a><a href="http://photofile.name/users/wildarmour/96296948/114042393/"><img src="http://photofile.name/photo/wildarmour/96296948/large/114042393.jpg" border="0"></a>
<a href="http://photofile.name/users/wildarmour/96296950/114042394/"><img src="http://photofile.name/photo/wildarmour/96296950/large/114042394.jpg" border="0"></a><a href="http://photofile.name/users/wildarmour/96296952/114042398/"><img src="http://photofile.name/photo/wildarmour/96296952/large/114042398.jpg" border="0"></a>
Posted: Wed Dec 23, 2009 8:55 am
by GunnarUlfson
Measurements? Also it has no avantail attached? I thought I saw pictures with one.
Posted: Wed Dec 23, 2009 10:36 am
by Zweihammer
Damn, that is sexy. I am certain you will find a very happy person to purchase that from you for such a low price!
Posted: Wed Dec 23, 2009 10:53 am
by Cisco
GunnarUlfson wrote:Measurements? Also it has no avantail attached? I thought I saw pictures with one.
That's the mild steel one. He made that one first and made this as after that one.
But I'm sure he'd be happy to add one.
Posted: Wed Dec 23, 2009 11:06 am
by Valerian
I'm pretty interested in that if it fits ... waiting for measurements.
-Valerian
Posted: Wed Dec 23, 2009 12:01 pm
by GunnarUlfson
Cisco wrote:GunnarUlfson wrote:Measurements? Also it has no avantail attached? I thought I saw pictures with one.
That's the mild steel one. He made that one first and made this as after that one.
But I'm sure he'd be happy to add one.
No that is the Stainless one that was commissioned, but it has no avantail as the owner was going to use titanium. Too close to home, so I do not want to step on someone's kit. I think it would be bad form to snap up a helm that someone is basing a kit around when they are less than 50 miles away. Damn sexy helm though!
Posted: Wed Dec 23, 2009 12:35 pm
by Cisco
GunnarUlfson wrote:Cisco wrote:GunnarUlfson wrote:Measurements? Also it has no avantail attached? I thought I saw pictures with one.
That's the mild steel one. He made that one first and made this as after that one.
But I'm sure he'd be happy to add one.
No that is the Stainless one that was commissioned, but it has no avantail as the owner was going to use titanium. Too close to home, so I do not want to step on someone's kit. I think it would be bad form to snap up a helm that someone is basing a kit around when they are less than 50 miles away. Damn sexy helm though!
Right right, poorly phrased. I meant that the one made in this post is the stainless one...the one you were thinking (with the aventail attached) was the mild steel variant. I had assumed that to be the case.
Either way, I'm looking forward to seeing his kit when it's made. He's a intimading guy and his kits have always looked awesome...but I might run away screaming if he shows up in this helm...
Posted: Wed Dec 23, 2009 12:43 pm
by Valerian
PM sent. Dibs pending answer to a couple of logistical questions.
-Valerian
Posted: Wed Dec 23, 2009 12:51 pm
by GunnarUlfson
Cisco wrote:GunnarUlfson wrote:Cisco wrote:GunnarUlfson wrote:Measurements? Also it has no avantail attached? I thought I saw pictures with one.
That's the mild steel one. He made that one first and made this as after that one.
But I'm sure he'd be happy to add one.
No that is the Stainless one that was commissioned, but it has no avantail as the owner was going to use titanium. Too close to home, so I do not want to step on someone's kit. I think it would be bad form to snap up a helm that someone is basing a kit around when they are less than 50 miles away. Damn sexy helm though!
Right right, poorly phrased. I meant that the one made in this post is the stainless one...the one you were thinking (with the aventail attached) was the mild steel variant. I had assumed that to be the case.
Either way, I'm looking forward to seeing his kit when it's made. He's a intimading guy and his kits have always looked awesome...but I might run away screaming if he shows up in this helm...
Gotcha... multi tasking with a low caffeine level today so my comprehension is beyond "Arrr duh", but not by much.
I too cannot wait to see this helm in action.
Posted: Wed Dec 23, 2009 9:08 pm
by Blackoak
Wow, that is a beautiful helm. Great work!
Great price as well.
Uric
Posted: Wed Dec 23, 2009 9:44 pm
by Payn
"The face plate is made of brass, riveted over exactly the same plate of stainless steel."
I would be worried of missing shots more than it deforming.
Posted: Thu Dec 24, 2009 7:54 am
by Valerian
Releasing dibs. Got additional measurements and the side of the head was too short for me.
Too bad. This is a gorgeous piece of work.
-Valerian
Posted: Thu Dec 24, 2009 10:34 pm
by Theodwyn Kelsale
Its the sister hat to mine!