Page 1 of 1
FS: Surefire M85 Picatinny quad
Posted: Sun Aug 29, 2010 9:02 am
by Jonathan Atkin
Looking for 130 shipped (15 extra for insurance) or best offer, CONUS only I really don't want to mess with the ITAR treaty sorry. Paypal is prefered but I can do checks but will hold it till it clears.
Well I've finally stepped up to a nicer quad a Vltor CASV-S. So I'm selling this rail pictured on surefire's website,
http://www.surefire.com/M85-Mid-Length-Picatinny-Forend . As stated on surefire's website this is a MIDLENGTH quad it will NOT fit a full length or even a carbine length. There is slight wear on the contact points where it connects to the handguard cap and barrel nut but nothing horrible I can produce pictures upon request.
Posted: Mon Aug 30, 2010 3:19 am
by Jonathan Atkin
Bump
Posted: Mon Aug 30, 2010 3:48 pm
by Jonathan Atkin
someone anyone? Please buy it before I make another rifle >.< I swear if you leave spare parts lying around they multiply
Posted: Tue Aug 31, 2010 12:31 am
by sha-ul
Jonathan Atkin wrote:someone anyone? Please buy it before I make another rifle >.< I swear if you leave spare parts lying around they multiply
can I interest you in a stripped a-2 upper?
it's for sale as soon as I get the parts transferred to the flat-top
Posted: Tue Aug 31, 2010 2:25 am
by Jonathan Atkin
M4 feed ramps or regular?
Posted: Tue Aug 31, 2010 8:22 am
by sha-ul
Jonathan Atkin wrote:M4 feed ramps or regular?
I imagine it is regular, I bought this upper used, with a 24" bbl, I have a flat top, with the detachable rear sight on order& I have a YHM full floating hand guard to install on it.
Posted: Tue Aug 31, 2010 8:45 am
by Jonathan Atkin
If you could look please? This picture should help you know which is which. You can't have a M4 feed ramp with a regular barrel that causes problems.
http://www.weaponeer.net/forum/uploads/ ... uts0xk.jpg
Posted: Wed Sep 01, 2010 2:31 am
by Jonathan Atkin
Posted: Thu Sep 02, 2010 4:21 am
by Jonathan Atkin
The power of christ bumps you *throws holy water at you*
Posted: Thu Sep 02, 2010 11:24 am
by sha-ul
been crazy last few days, I will try to look at it later, if I can get home before 10pm
Posted: Thu Sep 02, 2010 3:18 pm
by chris19d
Interested in a Flat top upper w 16" a1 profile barrel w m4 feed ramps? About 600 rounds through it, functioned perfectly I just replaced it with a new upper and I need to get rid of it before it grows into a new rifle...
Posted: Thu Sep 02, 2010 6:30 pm
by Jonathan Atkin
this is not a Bump Up My Post
Posted: Fri Sep 03, 2010 4:28 am
by Jonathan Atkin
no one saw what I did there?
Posted: Fri Sep 03, 2010 2:56 pm
by sha-ul
Jonathan Atkin wrote:no one saw what I did there?
did it look something like this?
Posted: Fri Sep 03, 2010 3:08 pm
by Jonathan Atkin
It was a double bump
Posted: Sat Sep 04, 2010 1:47 pm
by Jonathan Atkin
<a href="http://s53.photobucket.com/albums/g65/thepaladin101/?action=view¤t=Riot_cop_point_blank.gif" target="_blank"><img src="http://i53.photobucket.com/albums/g65/thepaladin101/Riot_cop_point_blank.gif" border="0" alt="Photobucket"></a>
Posted: Sat Sep 04, 2010 2:04 pm
by sha-ul
I just looked, & mine appears to be a standard rifle barrel extension.
Posted: Sat Sep 04, 2010 2:56 pm
by Jonathan Atkin
I only have a M4 feed ramped barrel
Posted: Sat Sep 04, 2010 3:27 pm
by chris19d
you can easily re contour the feed ramps on the extension to match, I've done it a couple times.
Posted: Mon Sep 06, 2010 11:14 am
by Jonathan Atkin
Still for sale
<a href="http://s53.photobucket.com/albums/g65/thepaladin101/?action=view¤t=ry400.jpg" target="_blank"><img src="http://i53.photobucket.com/albums/g65/thepaladin101/ry400.jpg" border="0" alt="Photobucket"></a>
Posted: Mon Sep 06, 2010 12:05 pm
by sha-ul
Jonathan Atkin wrote:Still for sale
<a href="http://s53.photobucket.com/albums/g65/thepaladin101/?action=view¤t=ry400.jpg" target="_blank"><img src="http://i53.photobucket.com/albums/g65/thepaladin101/ry400.jpg" border="0" alt="Photobucket"></a>
OY!! this thread has crabs
