Sting / Mainz Gladius *SOLD*

Thomas MacFinn · Post by **Thomas MacFinn** » Thu Sep 22, 2011 6:26 pm

Another waster prototype. I haven't decided on a price for this yet. Make me an offer.

Scott · Post by **Scott** » Thu Sep 22, 2011 7:18 pm

Nice shaving bench!

Can you post the plans for it?

Thanks,
- Scott

Thomas MacFinn · Post by **Thomas MacFinn** » Thu Sep 22, 2011 7:29 pm

Scott wrote:Nice shaving bench!

Can you post the plans for it?

Thanks,
- Scott

http://countryworkshops.org/shavingmule.html

Squire Felix · Post by **Squire Felix** » Thu Sep 22, 2011 7:34 pm

Can you give me specific dimensions on it? Width at widest, weight, blade length, thrusty?

I think it might work for a project I am trying this winter.

Glaukos the Athenian · Thu Sep 22, 2011 7:37 pm

Hmmm...... I likes it precious...

Thomas MacFinn · Post by **Thomas MacFinn** » Thu Sep 22, 2011 7:50 pm

single piece of rattan with stained rattan handle
1 lb 0.8 oz
24" overall
16" blade (including thrusting tip)
2 1/8" at widest point of blade, 2" at base of blade, 2 1/4" pommel
balances at the narrowest part of the blade

Thomas MacFinn · Post by **Thomas MacFinn** » Thu Sep 22, 2011 7:58 pm

Glaukos the Athenian wrote:... precious...

That's a really hard price to get anyone to pay.

Malcolm ap Gwilim · Post by **Malcolm ap Gwilim** » Thu Sep 22, 2011 8:15 pm

That is really nice. I know a few out here who would like that.

Malcolm ap Gwilim · Post by **Malcolm ap Gwilim** » Thu Sep 22, 2011 8:16 pm

That is really nice. I know a few out here who would like that.

hivemind · Post by **hivemind** » Thu Sep 22, 2011 8:24 pm

Is there a requirement in the SCA to cover the rattan with tape? Coming from games that use latex, Plastidip, or even cloth, the tape looks.... unfortunate.

Thomas MacFinn · Post by **Thomas MacFinn** » Thu Sep 22, 2011 8:42 pm

hivemind wrote:Is there a requirement in the SCA to cover the rattan with tape? Coming from games that use latex, Plastidip, or even cloth, the tape looks.... unfortunate.

Tape is most common. Here is what the rules actually say:
5. All weapons shall have all cutting edges and thrusting tips marked in a contrasting color.
6. The striking surfaces of all weapons, including the tip, shall be wrapped in a manner that allows no rattan splinters to protrude.

The sword above has a layer of strapping tape under a layer of mylar "chrome" duct tape, with yellow electrical tape on tip and edges. I usually use black for edges and red for tips but am out of both colors.

hivemind · Post by **hivemind** » Thu Sep 22, 2011 8:44 pm

Hmm. What are the options that don't look like tape? Heat shrink tubing maybe?

Thomas MacFinn · Post by **Thomas MacFinn** » Thu Sep 22, 2011 8:46 pm

11. Rattan shall not be treated in any way that will substantially reduce its flexibility (e.g., treated with wax, resin, fiberglass, etc.).

hivemind · Post by **hivemind** » Thu Sep 22, 2011 8:48 pm

Lest I be "that guy", am I to assume that everyone just uses tape, and that I should get used to it?

archibald · Post by **archibald** » Thu Sep 22, 2011 8:52 pm

hivemind · Post by **hivemind** » Thu Sep 22, 2011 8:52 pm

There you have it.

Thomas, nice knife.

Thomas MacFinn · Post by **Thomas MacFinn** » Thu Sep 22, 2011 8:56 pm

Tape is the standard; however plain round 1 1/4" rattan rods with a rigid hand-cage are also the norm. Learn the norm but don't be afraid to make improvements once you understand the 'whys' behind the norm. I do.

Glaukos the Athenian · Thu Sep 22, 2011 9:03 pm

Ok, I am dumb at this, what would be a fair price for this one guys, so I can see if I can afford it and make a reasonable offer if I can...

NorthHammer · Post by **NorthHammer** » Fri Sep 23, 2011 1:06 pm

I'm seconding Glaukos. I really like it but not sure what to offer. Secondly, are you willing to do another?

Thomas MacFinn · Post by **Thomas MacFinn** » Fri Sep 23, 2011 1:54 pm

I'm guessing $80 for future ones, but I'm willing to let this one go for quite a bit less.

NorthHammer · Post by **NorthHammer** » Fri Sep 23, 2011 8:09 pm

A bit too much for me this close to Great Weatern War. But a very nice piece.

Thomas MacFinn · Post by **Thomas MacFinn** » Sat Sep 24, 2011 11:29 pm

So..... nobody?

Thomas MacFinn · Post by **Thomas MacFinn** » Mon Sep 26, 2011 9:22 pm

Sold. Thanks for all the interest.

Sting / Mainz Gladius SOLD

Sting / Mainz Gladius SOLD

Re: Sting / Rattan Greek Hoplite Long Knife

Re: Sting / Rattan Greek Hoplite Long Knife

Re: Sting / Rattan Greek Hoplite Long Knife

Re: Sting / Rattan Greek Hoplite Long Knife

Re: Sting / Rattan Greek Hoplite Long Knife

Re: Sting / Rattan Greek Hoplite Long Knife

Re: Sting / Rattan Greek Hoplite Long Knife

Re: Sting / Rattan Greek Hoplite Long Knife

Re: Sting / Rattan Greek Hoplite Long Knife

Re: Sting / Rattan Greek Hoplite Long Knife

Re: Sting / Rattan Greek Hoplite Long Knife

Re: Sting / Rattan Greek Hoplite Long Knife

Re: Sting / Rattan Greek Hoplite Long Knife

Re: Sting / Rattan Greek Hoplite Long Knife

Re: Sting / Rattan Greek Hoplite Long Knife

Re: Sting / Rattan Greek Hoplite Long Knife

Re: Sting / Rattan Greek Hoplite Long Knife

Re: Sting / Rattan Greek Hoplite Long Knife

Re: Sting / Rattan Greek Hoplite Long Knife

Re: Sting / Rattan Greek Hoplite Long Knife

Re: Sting / Rattan Greek Hoplite Long Knife

Re: Sting / Rattan Greek Hoplite Long Knife SOLD